Chevrolet Cruze Forums banner

intake

  1. Gen1 1.4L Turbo
    So I've replaced intake, valve cover, oil feed line to turbo, oil return line, both coolant lines, and the turbo and exhaust itself. All this was done at the same time. Now it's blowing white smoke while driving down the road. Any suggestions? Anyone else have this problem? Losttttttttt
  2. Gen1 1.4L Turbo
    2013 LT 6spd. Not tuned. Ok so I installed a diy Sri, and also did a diy catback. I have everything as stock as possible on my intake, the only thing that changed was the cone filter and maf adapter. Everything is intact even the stock air straightener is in there. I started getting p0171...
  3. Gen1 1.4L Turbo
    So I know this is unorthodox... most people will just say buy a CAI, but atm I just can't afford it. After reading post after post regarding airbox mods, swiss cheesing, or just plain cutting the maf housing out of the stock airbox for a cone, I ended up taking off the entire bottom of the...
  4. Cruze Parts
    I have a 2015 Cruze 1.4L factory intake manifold with a bad PCV check valve if anyone needs a factory core to perform the external PCV fix upon. I will ship to you for the cost of shipping only. Email at [email protected] or text 704.9O5.423O. I will package and check with USPS for exact cost...
  5. Buy/Sell Classifieds
    Former Cruze owner in Cleveland, Ohio. I have a few interesting bits for sale: K&N intake w/extra filter and catch can $200 Trifecta Tune OBD to USB interface $50 Set of 4 16" alloys from Sonic (used on my gen1 and gen2 Cruze) with winter rubber and TPMS sensors $200 Would prefer local...
  6. Gen2 Powertrain
    Hey guys today i installed the K&N intake 69-4537TS my 16 new body Cruze 1.4t. Here is a link if you would like to hear and see the project.
  7. Gen1 Engine/Transmission Tutorials
    Here to fine tune my original DIY post on fixing the P2076 intake manifold tuning valve issues. Symptom: CEL is illuminated with code P2076 - intake manifold tuning valve position sensor or switch circuit range / performance Problem: The lever connecting the tuning motor to the intake manifold...
  8. Gen2 Diesel General Discussion
    Just curious where the different air intake temperatures are taken and what they should be. I have two X Gauges, IA2 and IA3, but I would assume there is a IA1 as well. IA3 is always the highest so I assume this may be post-turbo, pre-intercooler? IA2 is a little lower but seems to get kind of...
  9. Gen1 1.4L Turbo
    Anyone else with this intake have the tab the one bracket attaches to break? Was wondering what a rattle noise was when I started the car. It was the filter hitting the wheel well because that tab broke. How does a metal tab break from just holding an intake? :icon_scratch:
  10. Buy/Sell Classifieds
    Just bought it a couple weeks ago still practically brand new. Sounds good and looks great just decided to put the money elsewhere instead. Comes with ecm flash from dealer for free. It’s a one time flash free of charge that I haven’t had done on mine yet. For gen 2 17-19. Asking $325 plus...
  11. Cruze Parts
    Up for sale AEM Intake (Part#21-744C), comes with a new Spectre Air filter (cleanable) (comes with all the hardware and paperwork) Asking $150 US +Shipping MGP Caliper covers part#14232SCRZRD for first gen Cruze (set is front and back, Red with silver writing) used less than a summer asking...
  12. Gen2 Powertrain
    Hello, i am new to the forums and was hoping to find some help on this subject. I have a 2018 Cruze with the 1.4L and manual trans. it is a daily driver but i wanted to do some intake upgrades and the position of the MAF sensor is making that a bit difficult. could anyone give me some tips on...
  13. Cruze Parts
    Hi I am selling a chevy cruze intake camshaft gear/actuator .I have orderd this part from the USA but when i stripped my car to change it i realized that mine was the 55567049 im not sure if i can use it on my Chevy cruze 1.6 LS thats why i want to sell it so i can get the correct one does any...
  14. Gen1 1.4L Turbo
    Has anyone ever been dynoed after installing a ported intake manifold to see the true increase you get with it installed? I think the one for sale online claims 14hp and 11tq, I decided to do mine myself instead of paying $400 CAD for it and it turned out great in my opinion but just wondering...
  15. Gen1 1.4L Turbo
    UPDATED** MAKE SURE YOU READ POST #5, PLEASE AND THANK YOU. So I am pulling everything off the engine and cleaning it up, cleaning all wires and connections, replacing seals and lines, installing a pcv fix kit, porting my intake manifold, making a DIY honeycomb for my arm cai and just cleaning...
  16. CruzeTalk New Member Introductions
    I just got a 2012 Cruze LT with the 1.4 Turbo. I am just wondering what mods people do to these. My first planned mod is a cold air intake, then a tune from trifecta (it wouldnt let me link it), and beyond that i have no clue what i want to do. i am planning to make this a quick car, loud and...
  17. General Discussion
    I am looking to add an aftermarket intake to my Cruze. It's a 2011 LS 1.8, however I am trying not to break the bank. What are some companys that won't leave me too poor?
  18. Gen1 1.4L Turbo
    So as the title states, I installed a cold air intake today (one of the longer ones, previously had a short ram) and now I was almost immediately met with a P1101 code. At the same time I also did installed a BNR (Forge) atmospheric bypass valve. There were no codes before the install...
  19. Gen1 1.4L Turbo
    Hi guys, I've been lurking on here since I bought my 2012 Cruze in 2014 but finally decided to create an account. This website has been a huge help in figuring out the issues with my car. Thanks to everyone on here. History on car: PCV x 2 Water pump Coolant leak x 2 Oil leak Drum brake...
  20. Buy/Sell Classifieds
    Looking for an intake manifold stock or ported. My current manifold lost its orange rubber disk. Going to get a pcv kit and would like to do the retrofit before taking my current one off. Found a few on eBay wanted to see if someone here has one laying around.
Top