Chevrolet Cruze Forums banner
ksport
1-19 of 22 Results
  1. Gen1 Wheels, Tires, Brakes, & Suspension
    Hey everyone, My 2013 RS just rolled over 105,000 KM and I'm starting to notice some suspension noise and ride quality issues. I commute 120 KM a day and would like to keep the best possible ride while lowering it. I'm torn on going with Eibach or B&G Lowering Springs and Bilstein B8 Sport...
  2. Gen1 Wheels, Tires, Brakes, & Suspension
    Hey guys, Does anyone have any info on or experience with upgrading Kontrol Pros to stiffer or shorter springs? I am planning for a new wheel setup and I am interested in tweaking my suspension as well depending on the options. KSport support said there weren't any other replacement options...
  3. Cruze Parts
    $800 shipped to lower 48 , they havent even been stalled for a week will remove and ship with paypal set in motion Sent from my XT1254 using Tapatalk
  4. Gen1 Wheels, Tires, Brakes, & Suspension
    Having KSport coilovers installed on my diesel tomorrow. My question is about the damper settings. Not looking to significantly firm up my ride characteristics. Want a nice factory-like ride. Where should I set the dampers initially? I have Pedders coilovers on my ECO that my son now uses...
  5. Cruze Parts
    I have ksport coilovers with less than 8k miles on them!! Comes with the adjustment wrenches and the swaybar end links. Also the rear perches were NEVER used so they are in brand new condition!!!! Giving everyone a heads up the rear springs are slightlt cut. No difference at all in ride quality...
  6. Gen1 Wheels, Tires, Brakes, & Suspension
    Anyone have pictures of whats included in d2's or ksports's basic air suspension kits for the cruze? I looked them up on both of their main sites and all they have is a stock photo of the kit. PICS PLEASE! lol
  7. Gen1 Brakes/Suspension Tutorials
    I just got KSports the other day and wanted to write up a picture guide for those of you that need/want a visual reference. DMac did a great write up, so if you are looking to do coilovers yourself, make sure you look at both threads. Plenty of good information! Opening the box reveals a lot...
  8. Cruze Parts
    Selling my Styluz 1575 wheels 18x8 square setup. They were poweder coated transparent gold with super chrome undercoat by Pro-tek powder coating. Only used for 8k and were powdercoated after 7k. Tires are Hankook V2 225/40/18 used for 8k. $1000 buyer pays shipping (purple lugs included) Also...
  9. Gen1 Wheels, Tires, Brakes, & Suspension
    Well being Canadian I like to do everything I can to keep my money within the country before out sourcing to the states. Just curious where all the Canuck's are ordering their K-sport coil overs from? Buddy who is a Keystone dealer said he can't help me out.
  10. Gen1 Wheels, Tires, Brakes, & Suspension
    After having my Cruze riding at stock height for way too long now, I finally bought KSport Coilovers, and last night I finished the install. In order to get the rear as low as it is I had to take the silver adjustment rings off the machined bump stop spacer, and I had to camber the front wheels...
  11. Cruze Parts
    Recently installed a set of coilovers I purchased off thmotorsports.com. I've had them installed since Oct 11 and maybe have put 1000 miles on them. Im trading the cruze in on a jeep and do not want to leave them installed. They are still currently installed on the car and Im putting this up to...
  12. General Discussion
    Could someone that has ksoprts installed post a pic under th car in the rear? TYIA
  13. Gen1 Wheels, Tires, Brakes, & Suspension
    Is there anyway someone could maybe create a How-To for the KSport Kontrol Pros? I've had these dang things in my trunk for almost two months now because I don't know how to put them on. I have the mechanical capability but don't know what I'm looking at with these little rubber bushing things...
  14. Gen1 Wheels, Tires, Brakes, & Suspension
    Making some progress on the cruze. Currently have the winter tires on so don't judge the rally look:th_thumbsdownsm:. Fronts still have 30 threads or so, but the rear is maxed out with both locking rings removed on each side. Shock wont adjust anymore to keep tension on the rear springs. Over...
  15. Cruze Parts
    Hey Everyone, For sale is a set of Ksport coil overs. I've had these on my ECO for about 7k got them back in June. They have been great but I want a Honda Grom. For sale these coils go! Includes every single part down to spacers and sway bar link adapters. I am super picky when it comes to...
  16. Cruze Parts
    HID h8 3000k 55w slim ballast 40$ Ultra racing rear strut 90$ ultra racing front strut 110$ ultra racing lower rear 2 point brace 90$ Ksport coilover kit with upgraded 16k springs and stock 8k springs 780$ everything is a little to over a year old so they have seen some use. Everything...
  17. Gen1 Wheels, Tires, Brakes, & Suspension
    I installed ksport kontrol pro coil overs on my 1.4 cruze with 6 speed manual trans, when i take off between half to full throttle in fist gear (sometimes second) i get a small wobble or shake on the front end of the car. I know every bolt is tight and i used lock tight. Has anyone had this...
  18. Gen1 Wheels, Tires, Brakes, & Suspension
    Does anyone have their Cruze lowered with the Ksport Coils ?! If so , can I see it ? because those are the coils I want to get and I wanna see if they will make my car low to my liking :)
  19. Gen1 Wheels, Tires, Brakes, & Suspension
    Does any one have these yet? If so how do you like them and do you have any pics? I just ordered a set today and im pretty excited!
1-19 of 22 Results
Top