Chevrolet Cruze Forums banner
lug
1-19 of 22 Results
  1. Gen2 Wheels, Tires, Brakes, & Suspension
    So I took my cruze for first free service (and recall stuff) and just noticed today they mutilated one (only one) of the plastic lug covers and they all feel super tight not hand tight (covers). Hmm say something or not? Service dpts get pretty prickly when you say damage. I dont want bad...
  2. Gen1 Wheels, Tires, Brakes, & Suspension
    I'm trying unsuccessfully to locate a confirmed match to a factory cruze lug nut. I want a black GM lug nut set for the whole car, but as far as matching the flare/length/pitch I haven't found anything. Anyone's help is appreciated. If anyone has experience with quality aftermarket lug nuts and...
  3. General Discussion
    It seems I lost one of the caps on a lug nut on my car and after checking the local auto parts stores I left to going to the local dealership. I swear the guy behind the counter(which happened to be the parts manager)rose to his level of incompetence to get promoted!!! I asked him for a lug...
  4. Gen1 Wheels, Tires, Brakes, & Suspension
    I bought a set of used snow tires, very little use, owner traded car in. The wheels are Konig Crowns what lug nuts do I need for these wheels. The website says I need lug nuts other than factory bt not much help beyond that. Looking at eBay I find references to these says they will fit my car...
  5. Gen1 Service Issues
    Does anyone have a confirmed wheel lug nut torque specs? I can't find it anywhere in my manual and I've heard it's 90 whereas others have said 100 (from trying to find the specs online). Right now mine are torque'd at 100lbs. Steel rims btw. Thanks and sorry if this is in the wrong section.
  6. Gen1 Wheels, Tires, Brakes, & Suspension
    Can someone say for certain if the lug bolt pattern on a 2016 is diff from previous years , am buying wheels on ebay and the fitment guide say they will fit 2013 but not the 2015 , thanks ....... didn't list the 16 by the way ...... I was getting the wheels for a Sonic but bought a new 2016...
  7. Gen1 Audio & Electronics
    Hey guys, I have a 4 gauge setup right now, but will be upgrading to 1/0 in the very near future. Quick question though. I currently have lugs on the power and ground wires. I cannot remember what the opening size is though for the ground. I used the bolts that hold down the top of the back...
  8. Gen1 Wheels, Tires, Brakes, & Suspension
    Ok I'm new here but I looked an didn't find nothing on changing the suspension on the cruze to get a better lug pattern I have a 12 cruze eco I know already I could put the diesel cruze suspension on mine to make it 5x115 but that's not really that much better there's gotta b at least 3 other...
  9. Gen1 Wheels, Tires, Brakes, & Suspension
    If you couldn't figure that out: Somehow I lost a lug nut! I happened to go out to the garage and something looked strange. Sure as **** I was missing a lug nut. I was not the last to touch the car the purchasing dealer was. SO I went to O Rilies and they sold me a lug nut that did not look...
  10. Gen1 Appearance, Body, Detailing, & Interior
    I'm thinking of either buying black lug nuts or painting the ones on the car. If I paint the ones on it will the paint just rip/wear off from washing the wheels and removing the wheels when rotating the tires? If I buy them I'm thinking something like this Amazon.com: 20 Premium DPAccessories...
  11. Cruze Parts
    here is the invoice. you can see they are less than 1/2 price with just one season on them. I am selling them because we sold our cruze and got a volt and they do not fit on the volt. they do tend to follow the grooves a little on roads that have grooves cut in the road parallel to the road...
  12. Gen1 Diesel General Discussion
    A little background before my actual question. For the past 4 months I have been driving around (about 8,000 miles) and have had zero issues with my car. This all changed yesterday. I woke up to drive to work as usual, but about halfway to work, my car started making this awful rumbling sound...
  13. General Discussion
    hey guys, any idea if these would fit stock 16 rims on an 11 Cruze? id really like to see the way they would look, especially after im done dipping the wheel New 20pc 12 x 1 5 Red Bulge Acorn Lug Nuts ¾
  14. Gen1 Wheels, Tires, Brakes, & Suspension
    Gonna get some extended lugs. Is the pitch 12x1.25 or 12x1.5?
  15. General Discussion
    Hi Time to change over from allseason to winter tires, have mounted 215-60 on 16" universal rim 5 bolt pattern. Husband attempted to put on and ++ difficulty as bolts kept touching hole openings, tried to finger tight lug nuts then apply with impact gun. Now the bolts are stripped and lug nuts...
  16. Gen1 Wheels, Tires, Brakes, & Suspension
    I just wanted to check before I ordered some aftermarket lug nuts (Gorilla Lug Nuts) for my winter wheels. I'll be using the steelies, so I am assuming these use a 60* Bulge Acorn? The ones I am looking at are capped, not open like the factory lug nuts. They have an overall length of 1.36"....is...
  17. Gen1 Brakes/Suspension Tutorials
    Be forewarned, this is a difficult DIY. If you do not have a well-equipped toolbox, do not attempt this. This DIY assumes you are comfortable working with disc brakes, and know how to properly jack up and support your Cruze. DISCLAIMER: This is for instructional purposes only. Neither I nor...
  18. Gen1 Wheels, Tires, Brakes, & Suspension
    Anyone know the actual size of our lug nuts ? I saw some nice long threaded lugs off DGRsuspension.com Any info would be great, thanks guys!
  19. Gen1 Wheels, Tires, Brakes, & Suspension
    Does anyone know if the standard lug nuts that come with the Eco 17" aluminum wheels have enough tread to tighten down the 16" steelie wheels for winter or do I need another set of open end lugs?
1-19 of 22 Results
Top