Chevrolet Cruze Forums banner
manifold
1-19 of 64 Results
  1. Cruze Parts
    I have a 2015 Cruze 1.4L factory intake manifold with a bad PCV check valve if anyone needs a factory core to perform the external PCV fix upon. I will ship to you for the cost of shipping only. Email at [email protected] or text 704.9O5.423O. I will package and check with USPS for exact cost...
  2. Gen1 Engine/Transmission Tutorials
    Here to fine tune my original DIY post on fixing the P2076 intake manifold tuning valve issues. Symptom: CEL is illuminated with code P2076 - intake manifold tuning valve position sensor or switch circuit range / performance Problem: The lever connecting the tuning motor to the intake manifold...
  3. CruzeTalk New Member Introductions
    Does anyone know if there is an aftermarket exhaust manifold that would remove the catalytic converter in the stock manifold? I have looked at a few previous posts and have not had much luck locating one. The first thread I looked at was by the BNR folks saying they came out with one. I...
  4. Cruze Parts
    I have both XtremeRevolution's Big 3 kit and his V1 Manifold PCV valve fix kit as well as the BNR throttle Body Spacer for sale My cruze got totaled by a deer before I got an chance to install them. All are brand new and never been installed BRN Throttle Body - $55 Big 3 Kit - $45 V1 Manifold...
  5. Gen1 1.8L
    On my 2012 Chevy Cruze LS, One of my Exhaust Manifold Heat shield bolts has rattled out. The flanges on the bottom have rusted and snapped off (Not sure who at GM though two little dinky flanges were a good idea) so my heat shield is being held by only one bolt. Can any one tell me the bolt...
  6. Gen1 1.4L Turbo
    Has anyone ever been dynoed after installing a ported intake manifold to see the true increase you get with it installed? I think the one for sale online claims 14hp and 11tq, I decided to do mine myself instead of paying $400 CAD for it and it turned out great in my opinion but just wondering...
  7. Gen1 1.4L Turbo
    Hi guys, I've been lurking on here since I bought my 2012 Cruze in 2014 but finally decided to create an account. This website has been a huge help in figuring out the issues with my car. Thanks to everyone on here. History on car: PCV x 2 Water pump Coolant leak x 2 Oil leak Drum brake...
  8. Buy/Sell Classifieds
    Looking for an intake manifold stock or ported. My current manifold lost its orange rubber disk. Going to get a pcv kit and would like to do the retrofit before taking my current one off. Found a few on eBay wanted to see if someone here has one laying around.
  9. Gen1 1.4L Turbo
    Just got a turbo under boost code a couple days ago, peeked around under the hood last night looking for loose clamps and boost leaks. Noticed my turbo moved around a lot when I pushed on it...Removed heat shield to find my v band clamp that secures the turbo to the manifold grew legs and ran...
  10. General Discussion
    I hava a 2014 1.4l and had the valve inside the intake manifold and the pcv on the valve cover go bad. I purchased GM replacement parts for them and installed them a couple days ago. Since the install when I try to start the car it revs up to redline and then dies. After a couple times trying to...
  11. Gen1 1.4L Turbo
    I'd like to start with the regular first time poster, long time reader line. And also I apologize if this has been asked before. I have a 2015 chevy cruze 2lt with 62k miles. Bought the car with 4k on it. I recently threw an engine code for mass air flow sensor. I looked and found a vacuum leak...
  12. CruzeTalk New Member Introductions
    I'm wanting to order the kit, but I cant find a link to order it. Could someone help me please
  13. Gen1 Powertrain
    Where is the location of "Intake Manifold check valve OEM #55568437"in the Chevrolet Cruze?
  14. Gen1 1.4L Turbo
    Is there a specific torque I need to set the exhaust manifold studs/nuts to? Also, is there any trick to getting a socket on that far left lower nut? 1/8 a turn at a time will take me all day.
  15. Cruze Parts
    I have the PCv intake manifold kit for sale.I bought it off here from xtreme and didn’t use it. I accept Paypal or local pickup only for 60 dollars.
  16. Gen2 Powertrain
    Hey guys, was wondering what year did the 1.4T engine have the turbine section of the turbocharger made into the exhaust manifold? I am thinking 2018, but was wondering if they started in 2017? Thank you.
  17. General Discussion
    Hi there, Owner of a Chevy Cruze LTZ 2014. About two weeks ago the car started having a rough idle when the check engine light came on, engine seemed to be making a squealing sound, and even the battery died one day. Chevy Dealership said it was a valve cover and manifold replacement to fix...
  18. TRIFECTA Performance
    TRIFECTA: Test results of Racer X LUJ/LUV intake manifold April, 2018 Introduction In 2017, Racer X Fabrication (Racer X Fabrication) brought to market an aftermarket intake manifold for the 1.4L Turbo MPFI engine (RPO: LUJ and LUV). They advertise it as being only compatible with the 2012+...
  19. Cruze Parts
    Did a engine swap last year but I carried over my original manifold with the external pcv fix so I have no use for this manifold. Donor engine is a 2015 Buick Encore luv with 17,000miles from LKQ. Manifold is compete and includes injectors, fuel rail, map sensor, Evap purge solenoid...
1-19 of 64 Results
Top