Chevrolet Cruze Forums banner

monitor

  1. General Discussion
    Just purchased a great looking car for my daughter and the tire light is on, along with Service system Message on dash. I took to tire shop and they told me not reading the sensors, that my computer needs reprogram. The tires are original 32K miles on them, all holding air 32-37psi. Will the...
  2. Gen1 Wheels, Tires, Brakes, & Suspension
    I own a 2013 Cruze LTZ, and since I live in Canada it does not have the Tire Pressure Monitor System in it (I have gone through every possible menu, trust me it does not have it). Obviously, there are four radio frequency transmitting pressure sensors (one for each tire), I could easily get...
  3. Gen1 Diesel Technical Discussion
    Yesterday I had an interesting thing happen and I wanted to share. To set the stage, I drive at least 110 miles round trip daily for work and the drive is mostly highway. I am very particular about the maintenance on my CTD. I have been noticing my CTD seems to not be as responsive as it used to...
  4. Gen2 Wheels, Tires, Brakes, & Suspension
    2018 Cruze TD HB, 12k miles I am getting this message intermittently for the past month. Started a few days after oil change/ tire rotation at dealership. The service advisor was quick to chalk it up to needing to “relearn “ the system again, she said it sometimes happens after the service that...
  5. CruzeTalk New Member Introductions
    Can't seem to get the evap or the catylist monitor to set to ready any help would be appreciated. It's a 2012 1.4t
  6. Gen1 Service Issues
    Hey guys I had new tires put on the other day. I replaced one rim and one sensor on the passenger side rear. The next day I had a service tire monitor system on the display. I cycled through the info menu and it displayed all tire pressures with the exception of the driver's side rear, which...
  7. Gen1 Audio & Electronics
    Hi all, I have been getting the Service Tire Monitor System message when driving in the wet. It is always the right rear wheel that shows no signal. I think that the tpms sensors use the valve stem as their antenna. Where is the corresponding antenna on the car? Do the sensors talk through...
  8. Gen1 Audio & Electronics
    So I am curious to see if anyone has a flip down DVD player or Headrest DVD players in there car? I cant decide if I want to pay a little more and get the headrest TV's or put holes in my headliner and put up a Flip Down. Anyone have either in there Cruze? If so, can you upload a pic? I have...
  9. Gen1 Diesel General Discussion
    So I originally had the first cts monitor and it worked great had all the pids and functioned as it was suppose to. Well I got into an accident back in June and once I finally got my car back in Nov my monitor stop working. I figured it was shorted out by the place that did the repair work since...
  10. CruzeTalk New Member Introductions
    I notice that the oil life monitor in my 2011 Cruze started reducing the mileage between recommended oil changes. Up till recently, it used to show 50% oil life remaining after 9,000km but right after it hit 250k it started showing 50% at only 6,000km (I've always changed it at 50%). My driving...
  11. Gen1 Service Issues
    Hello, I have a 2011 Chevy Cruze I've owned for about 2 1/2 years now. I am going to sound extremely stupid as I know nothing about cars, but I am tired of feeling like I am being taken advantage of by the dealer because I am a young female. So I was going to see if anyone here has any insight...
  12. General Discussion
    I am curious what the most beneficial information I should be keeping my eye on with my Ultra-gauge. Currently on the main screen that I watch I have: -Boost pressure -Water temperature -MAP pressure -Fuel pressure -Timing advance -Intake temperature Are there any other things that the...
  13. Buy/Sell Classifieds
    Sold my Diesel Cruze. No longer need this gauge. This monitor will tell you when a regen is occurring along with a bunch of other information (Soot level, boost, RPM, EGT, etc). Saved me a bunch of money by letting me know my Cruze Diesel was performing regens every 70 miles or so as opposed...
  14. General Discussion
    I'm trying to find a decent monitor for the car to keep the kids entertained on our frequent long trips. My online searches are not turning up much. All I would like is a screen that can strap to a headrest or permanently mount to the headliner, and plays digital files from a SD card or usb...
  15. Gen1 Audio & Electronics
    I been looking into a unit to monitor things that my DIC don't. Like transmission temp, boost, G-force, oil pressure & temp, Etc.... If anyone has suggestions please chime in. I seen some pricey units like the Insight CTS2 - 84130 & cheaper units like ultragauge. What I'm really looking for is...
  16. Gen1 Wheels, Tires, Brakes, & Suspension
    While driving home today the dash came up with "service tire monitor system" and the sort of flatned tire came up on the dash also flashing. Oh course I said a few 4 letters words because I was on a 1 lane back road and there was no place safe to pull over. So I drove for about 10 minutes to...
  17. Gen1 Diesel General Discussion
    So, every time I do an oil change and reset the OLM, it goes down to 98% within minutes. Any ideas why?? Sent from AutoGuide.com Free App
  18. Gen1 Diesel General Discussion
    My review on the Edge Insight monitor.....ITS AWESOME! What I have also found out is if you drive it with a little authority it keeps the exhaust temps higher and the soot grams doesn't climb as quickly. Its nice to see when the DEF is actually pumping and seeing boost psi. For those that is...
  19. Gen1 Powertrain
    In early spring, I put my Cruze into storage for 13 weeks. It was not driven or even started up during the storage period. When I put it on the road last month, the Oil Life Monitor (OLM) dropped significantly, to the tune of 24% Life Expectancy-almost 2% per week-all while the engine was never...
  20. Gen1 Diesel Technical Discussion
    This is a corollary to my post on the "How to" sub-forum. I installed the Insight on the 4th of July, so I’ve had some time to look at displayed data. I configured the first gauge screen to show Exhaust Gas Temperature (from the probe), Soot Level (in grams), and Boost (from the factory PID)...
Top