Chevrolet Cruze Forums banner
morimoto
1-11 of 12 Results
  1. Lighting
    2014 LT 1.4T After tons of researching CT and other sources I think I am ready to pull the trigger and get my next project going. Here is my list of things I am getting and also some items I need advise on. Bi-Xenon Morimoto Mini Stage III (D2S 4.0) Bixenon Projectors: D2S 4.0 (Round...
  2. Gen1 Appearance, Body, Detailing, & Interior
    Has anyone seen these done? To a Cruze? I would like to do a retrofit with either these or the FXR Stage III HID's. I like the performance of the LED, so I want to see if anyone has done this to a Cruze headlight yet.
  3. Gen1 Appearance, Body, Detailing, & Interior
    Here is my Morimoto 3” FXR 3.0 retrofit done by Lightwerkz. They are done in TYC housings. The halos are switchback from Diode Dynamics on Orbit Shrouds. I am running the Osram CBI d2s bulb. Lightwerkz does great work and I highly recommend them to anybody. Sent from my iPhone using Tapatalk
  4. Gen1 Appearance, Body, Detailing, & Interior
    Here are some pictures from my HID retrofit. It is the Morimoto Mini D2S 4.0 with Apollo 2.0 shrouds. I used Morimoto XB 5500k d2s bulbs and Hylux 35w ballasts. The reflector buckets were painted black and everything else left stock. Sent from my iPhone using Tapatalk
  5. Gen1 Audio/Electrical Tutorials
    So this really isn't a how to write up, but more a pictorial overview of where/how I ran everything. The kit is the Morimoto H7 Elite. The kit came with the following: 5500K H7 bulbs, 55W ballasts, an anit-flicker capacitor (for the DRLs), and a heavy duty relay harness. First, for this job I...
  6. Gen1 Appearance, Body, Detailing, & Interior
    Need a little help here. I swapped out my factory headlights with WinJet Projectors and just installed Morimoto H7 HIDs in my car. Currently everything is run through the factory harnesses and wiring. The kit came with a heavy duty relay and wiring harness and most of it is pretty simple to...
  7. Gen1 Audio/Electrical Tutorials
    Chevy Cruze Mini D2S 3.0 Retrofit Hello this is a DIY retrofit for my 2013 Chevrolet Cruze but should be the same for any first generation North American Cruze. This was my first retrofit and This DIY should be followed with a grain of salt because of this. I am not an expert. Also comments on...
  8. Gen1 Audio/Electrical Tutorials
    I need an admin to delet this or tell me how to
  9. Gen1 Audio & Electronics
    Hello, I have a 2015 Cruze diesel and I'm lookin to do HIDS in it like I do all my cars. My question is what have others put in there car without retrofitting the headlight housings. This is a brand new car I will not be taking the oem headlight housings out to retrofit them nor do I like after...
  10. Gen1 Appearance, Body, Detailing, & Interior
    Has anybody tried retrofitting these into stock or aftermarket housing? http://www.theretrofitsource.com/complete-retrofit-kits/bi-xenon-mini-stage-3-kit-d2s.html#.U6zpMPldWSo I want them over the h1 minis but dont wanna spend money if they don't fit. Any help is appreciated
  11. Vendor Deals
    Alright guys, lets hook some of you up with a sweet deal on a great HID setup for your fog lights!!! :) The Morimoto Elite H8 HID system comes with everything you need for a plug and play upgrade to top quality HIDs, 3Five ballasts, 3Five bulbs,and TRS heavy duty relay harness. The ‘Moto...
1-11 of 12 Results
Top