Chevrolet Cruze Forums banner

mounting

  1. Gen2 Appearance, Body, Detailing, & Interior
    Hello all, I’ll be getting my hatch back from the dealer soon and I wanted to start using it to transport my mountain bike sometimes. I need space for atleast two bikes. Anybody here run a roof rack or a hitch mount setup? I have a roof rack on my Jeep currently but it’s too high to put bikes on...
  2. General Discussion
    2017 Cruze Hatchback RS here. Wondering where anyone has mounted Load Resistors or Ballasts for LED upgrades? Especially the rear lights. I trying to plan the best way to do an LED Turn signal upgrade. THANKS! UPDATE with details of my project OVERALL *Why am I doing this? I didn't want to...
  3. Gen2 Audio & Electronics
    Anyone know the max speaker mounting depth of front and rear door speakers?
  4. Gen2 Audio & Electronics
    Hi all, Contemplating a mounting location for my amp and DSP, and the trunk appears to be the only viable option. There doesn't appear to be enough room under the seats for the amp. The DSP would probably fit, but I'd like to keep them together. Have any of you mounted an amp in the trunk? I...
  5. General Discussion
    Hello again all! I've been messing around with transfering stuff I want to keep from my old car to the the new Cruze and the 42" Lightbar is one of them, as I live in the middle of nowhere with a lot of Kangaroos and are misc animals lighting is essential for me especially in the snowier...
  6. Gen1 Appearance, Body, Detailing, & Interior
    I have been browsing around trying to see how others have strapped there kayaks to there roof. I don't know if I want to drop $500 on a rail system so for now I just have the foam pads and straps. I'm about to throw mine on after work but wanted a little preview of how others have done it. Are...
  7. General Discussion
    I am thinking about buying an Illinois IPASS transponder to pay for tolls since I will be going to Illinois in the next couple of months. The instructions I have downloaded from a Google search state that I need to place the IPASS transponder at least 1 inch below the top of the windshield...
  8. General Discussion
    I bought a 24" curved lightbar and want to mount it on my lower front bumper. I've seen it done but am woundering how they have the mounting brackets and what they mounted it to. I have a few ideas but involves taking the front bumper off which I'm trying to avoid any suggestions would be...
  9. Gen1 Appearance, Body, Detailing, & Interior
    I recently purchased a 2014 LTZ/Rs bumper for my 2012 LT1. I damaged my bumper so i bought one off a wreck cruze. bumper is in great shape but i have a question about the mounting holes on the bottom of the bumper. my old bumper does not have the mounting holes on the bottom of the bumper and...
  10. Gen1 Appearance, Body, Detailing, & Interior
    Alrighty so I bought my Cruze back in May of last year and the snow was almost all melted away. Managed to keep the car nice and pretty throughout the summer minus a few rock chips. This winter is beating the crap out of her though. I noticed that just in front of the rear wheel wells it looks...
  11. Gen1 Appearance, Body, Detailing, & Interior
    I installed Kensun 6k HID bi-xenon conversion kit. I got everything installed however, i haven't mounted the ballast yet because i am trying to find a good spot. As of right now they are sitting atop the plastic shielding of the headlight assembly. I was wondering if this was a good place to...
  12. Gen1 1.4L Turbo
    Hey guys, just got my zzp intake, and attempted to install it today. All went well until I tried to install the mounting bracket. I can't get the bolt unscrewed, no matter how hard I try! It is the 3 bolts under the stock intake attached to the block, specifically the one closest to the front...
  13. Gen1 Audio & Electronics
    I have a Bluetooth obd adapter and I have a nexus 7, but I don't feel like installing it into the dash... Anyone have any good experience with either a dash/window mount or one of the arkon seat mounts? Or any other suggested mount that will allow me to remove the tablet so it doesn't cook in...
  14. General Discussion
    Been considering getting the Scanguage II and wondering where/how everyone else is mounting it in the Cruze. I prefer a clean, factory-like look, but see that there really aren't a lot of options to do so as internal storage space is limited and the dash controls lack real estate to place it...
  15. Gen1 Audio & Electronics
    Does anyone know how to get behind the glove box to mount something that connects to the stereo? Sent from AutoGuide.com Free App
  16. Gen1 Wheels, Tires, Brakes, & Suspension
    Okay... so this is going to be a noob question. I got under the car over the weekend, thinking I'd locate the stock sway and replace that with the new sway bar. Except... I didn't see anything that looked like a sway bar. I saw the support where the new whiteline sway bar mounts to... but didn't...
  17. General Discussion
    I posted awhile back about a nexus tablet in a cruze. Im dumping that idea and going with an iPad mini. Anyone mounted (more that a window mount) a iPad mini in a cruze yet? I have a 12 eco
  18. Gen1 Audio & Electronics
    For those of you who have a MiniDSP in their Cruze, has anyone used a blank project box and mounted it in the trunk, or are most just making it fit behind the dash? I figured it would look clean if I could mount it in a nice box on the underside of the package tray, and just run the USB cable...
  19. Gen1 Audio & Electronics
    Has anyone here on this forum installed a police/fire scanner in their Cruze? If so where have you mounted said scanner, and what type of antenna did you use? I am picking up my new 2012 Cruze 1LT RS on Wednesday and have been looking for all the accessories for the vehicle. I have always had...
  20. Gen1 Audio & Electronics
    I am thinking of putting my amp under the front passenger side seat. I want it hidden/semi-hidden. Pics help. Thanks!!:occasion14:
Top