Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 74 Results
  1. Gen2 Audio & Electronics
    Got my android phone paired with my infotainment system in my 2017 cruize. It works great with phone calls and my iTunes music. I'm not using the navigation on the info system because I'm a LYFT driver and LYFT says it is not compatible ( I tried it and it doesn't work) However, I loose the...
  2. Gen1 Audio, Electronics & Electrical
    Hi Everyone! So I’ve spent a bunch of time going through the mylink upgrade posts. I’ve decided I want to update my 2012 Cruze ls from the dot matrix display to the mylink w/nav (mostly to retain xm radio). Is there a how-to post on this? All of the ones I found really only discuss the non-nav...
  3. Gen2 Audio & Electronics
    Just saw this morning that a new nav update has been released for Gen2 Cruze. Dated as 2019, this is the first 2019 update I’ve seen released for any GM nav systems. Currently on sale for $99 until the end of the year. GM | Buick | Envision | 2017 | GM - Next Generation Infotainment 2.5...
  4. General Discussion
    Hi. I was wondering if you could help me out. I have a 2014 Cruze with mylink (no navigation). I had new speakers, amp, and sub installed, and now my head unit will not turn on. Took it to the dealer and they said it has an internal short, and needs to be replaced. So I'm wondering first of all...
  5. Gen1 Audio, Electronics & Electrical
    Unplugged antenna from the Onstar module. Installed this new system with tons of features. it works with climate control display, all car info display the old one used to show, all of the sounds like signal lights, chimes etc. using IGO for navigation. it does not play CD or DVD.
  6. Gen1 Powertrain
    Folks, I used to fly in the USAF and can't get enough engine instrument data. The Cruz doesn't show you too much by default on the DIC. Somebody recommended this to me a few years ago, but I never made the purchase. It's a little pricey at over $250, but I like the way it integrates with...
  7. Gen1 Service Issues
    I was using the OnStar app and able to send navigation to my 2013 Cruze with mylink and NOW they update the app and all I can do now is use the My Chevrolet app and it only has vehicle location under navigation. I also have the guidance package thru OnStar as well an still not able to send...
  8. 👋 CruzeTalk New Member Introductions
    We have a leased 2016 Cruze 2LT Turbo LTD with the RS package and 6-speed auto transmission. It only has around 18000 km on it. Once it would not recognize the remote or start once entry was gained with the key, but started up within 20 minutes or so. The radio has been cutting out and...
  9. Gen1 Audio, Electronics & Electrical
    I had a 13 Chevy Cruze without the navigation there was a button sequence you could push on the radio to hard reset it now on my 14 Cruze with the Nav It does not work. I would like to know if there is a button sequence you could push so you could hard reset away driving. Somebody's got to know...
  10. Gen1 Audio, Electronics & Electrical
    Anybody had experience with the radio and Sat nav resetting the time and cancelling saved destinations when starting the car. I have had the whole unit replaced to rectify the problem and had the car reprogrammed, but it is still doing it. FRUSTRATING!!!
  11. Gen1 Audio, Electronics & Electrical
    This morning a new navigation update was released for 2014, 15 and 16 Cruze. It is being labeled as a 2018 update and assigned part number 84157655. US$159.99 plus shipping. Nota Bene: For reasons unknown, this update will not work on CTDs whose navigation units operate with software number...
  12. Gen1 Audio, Electronics & Electrical
    Hi so I searched through the forum but couldn't find any answers to my problem. I just recently bought an aftermarket touch screen navigation system for my 2012 cruze and I'm not sure if we're installing it correctly but everything works except for the sound. Here's the link to the kit I bought...
  13. Gen1 Audio, Electronics & Electrical
    Hi Everyone, I have 2014 Cruze Equipe (Australian Model) which comes with touch screen MyLink without Nav and Reverse Cam. My understanding is that this unit also used to do vehicle settings. I know one of the options is to get an after market unit to install. Actually I don't know if this is...
  14. Gen1 Audio, Electronics & Electrical
    My Navigation screen went black shortly after purchasing a used Cruze 2012 LTZ. Dealer wanted around 1200 to replace the main unit, with the help of another member on this forum(ezap28ltz) I learned all I needed was a gmos-045 to install an aftermarket stereo and to retain the Nav screen with...
  15. Gen1 Audio, Electronics & Electrical
    Sorry in advance if this was already a thread. I recently bought a 2015 Chevy Cruze LT with no nav system and was wondering if anyone knew if it would be possible to take out the info screen currently installed and put in the OEM nav screen? thank you!
  16. Gen1 Audio, Electronics & Electrical
    This morning a new nav update has just been released for 2014, 2015 and 2016 models. Part number 84019252. GM - Connected Nav Radio System Map Update V.2017 | HERE As some of you may remember there was an update released less than four months ago. That update was for 2014 and 2015. This...
  17. Gen1 Audio, Electronics & Electrical
    I just discovered that GM has released an update for the map databases in 2014 and 2015 Cruze. GM | General Motors | GM - Connected Nav Radio System Map Update V.2016 | HERE I have no idea what the changes are but I placed my order and should have it mid-week. It is on a USB key and is...
  18. General Discussion
    Hi everyone, This is now my 3rd Cruze (12, 14 and now 2016 LTD). The map view on my new 2016 LTZ is 3D view. Meaning you're looking at the map at an angular view, not from straight up. Is there a way to change this to 2D view? I couldn't find anything in the settings. Thanks for the help.
1-18 of 74 Results
Top