Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Gen1 1.8L
    All, Good afternoon, I have a 2013 chevy cruze 1.8 that I did a motor swap on after a timing belt failure. After completing the swap and connecting all of the electrical I don't have any fuel pressure, no fuel coming from the fuel line to the rail. I preformed a scan and am getting a U0109...
  2. Gen1 Service Issues
    So I'm really confused, I was driving back home this afternoon. I came to a light stopped and my stalled , I tried to get it going but nothing it was dead no lights no electrical power at all. Got it towed and after a few hours I came back to the car to check on the car and realized that the...
  3. Gen1 1.4L Turbo
    Hi everyone. I have a 2012 1.4l turbo SRIVT This motor runs and idles perfect, so quite and smooth. EVEYTHING about it just seems to be perfect. Except for 1 thing. I don’t seem to have any power/acceleration. it changes through the gearslike normal, as far as I can feel. But say, doing...
  4. Gen1 Service Issues
    Just replaced the valve cover on my 2012 Cruze, then went to crank it up and it won’t turn over. I’m not getting power somewhere but i’ve checked the fuses, spark plugs, battery cable, etc. It also is giving me messages about StabiliTrak, power steering, and parking assist that were not on...
  5. Gen1 Service Issues
    Hi all, I recently had the turbo replaced on my 2012 SRi-V 6sp auto. It actually wasn't the bypass valve being stuck open - it was the turbine itself being completely wallered out and not spinning due to the turbo oil feed line clogging up with bits of a failed filter. That was a fun $2k+ job...
  6. Gen1 Service Issues
    Edit: please still read, I just turned it off for 2 minutes, back on, and my power is back and it’s not loud anymore. Could be some sensor acting up or some weird electronic engine control be on the fritz? Edit 2: been good for the next 4 hours All of a sudden after stopping and idling for a...
  7. Gen1 1.4L Turbo
    Billowing smoke and no power. ​Long post, so bear with me. So, going home Wednesday, I turned on to Michigan Ave. While accelerating, the engine started to stumble and lose power. I barely made it to 50mph and was not able to maintain that speed. All the while it was laying down a smoke screen...
1-7 of 7 Results
Top