Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 23 Results
  1. General Discussion
    Do these numbers look normal ? One is no pressure the other is at WOT
  2. General Discussion
    Anybody know if the Trifecta ez flash cable can be used with other software (or the trifecta software) to pull error codes from other vehicles? Thanks.
  3. Gen2 Diesel General Discussion
    CEL came on today with the following codes: P0403: EGR flow malfunction P0406: EGR flow sensor A high input P24A5: (definition unfound), Google search reveals this to be EGR cooler bypass bank 1 control stuck Any expert opinions of what is happening here?
  4. Cruze Owner Projects
    OBD2 我從使用 Tapatalk 的 SM-N950U 發送
  5. Gen1 Powertrain
    Is it possible to, say, use tunerpro or any other application to read/edit/write customer calibration files to the PCM? I am about to get HP Tuners, but I also see people selling these BNR/EFI handheld devices for like, $150ish all over the place. If I can avoid spending $400+ for HP tuners and...
  6. Gen1 Audio, Electronics & Electrical
    Hi all I currently have a 2015 Cruze 1.8 sportwagon MY14 Aussie version. I have been out of the trade for a couple years, and figure because I own three cars probably best time to get a scan tool to compliment any work I do at home. Things is I am unsure of the protocols, for engine...
  7. Gen1 Audio, Electronics & Electrical
    I installed the mylink in my car that I did not have, my question is where to connect the wire 28 of the radio in the obd2 module.
  8. General Discussion
    New here guys, just trying to help... I decided to order the new AEM Obd 2 gauge in hope that it would read most of my desired specs but they do not. The Pid's in the AEM system don't correspond with the majority of the Pid's coming from the cruz's ecu. No boost, no temp's, the vehicle speed was...
  9. Gen1 1.4L Turbo
    I own a 2011 Cruze 1.4 LT RS and I haven't done too much research but I'm diggin what I've seen so far on the OBD2!! Looking to get pointed in the right direction on an OBD that'll work like a charm with iPhone...I heard alittle bit bout them for android but not too much for our Apple fans! Is...
  10. Gen1 Service Issues
    I seen this on amazon has over 75% positive reviews it for a Blue driver OBD2 scanner does what you expect from a high end scan tool checks and resets codes and other stuff that you have to read my question is this would this be a item worth buying id end up paying more for a scanner and for one...
  11. Gen1 Diesel Technical Discussion
    About a week ago the Check Engine Light came on my 2014 Cruze Diesel. I bought a reader but it doesn't display an actual code and I'm confused how to read this. I read some where that Chevy makes so end users can't find the codes and they can only be read by their machines. I've cleared the...
  12. Gen1 Diesel General Discussion
    Has anyone else used the Torque App or similar App on the Cruze diesel and monitored the Throttle percentage graph ? Mine shows it fluctuating even at constant highway speed. I'm sure this is not normal. It would be great to know what other people are seeing on the graph at constant speed and...
  13. Gen1 Diesel Technical Discussion
    Hi all, is anyone familiar with using an OBD2 module and the Torque App on a 2.0 Diesel Cruze ? I bought one of these modules recently to reset the fault codes and monitor performance as the car will intermittently go into limp mode (code 84) while driving along. Typically it will happen while...
  14. Gen1 Powertrain
    When You use OBD2 diagnostics tool to read DTCs your vehicle. If DTCs lack of definition or possible causes. You can down this android app to your phone. It support over 190,000 DTCs. I'm use it and it have more definition and possible cause for GM and other vehicle. This app helpful for me...
  15. General Discussion
    Can anybody recommend a Bluetooth OBD2 adapter adapter that will work with our cruzen and won't break the bank?
  16. Gen1 1.4L Turbo
    I have read through some of the threads on this topic (through the search function) but would like to ask everyone's opinion on how the cheap scanners have been working. Are they reliable? And is there any benefit with getting one that is 65-100 dollars (believe the brand is scantool) If...
  17. Gen1 Audio, Electronics & Electrical
    Insalled an interceptor gauge that plugs into the obd2 port, was working fine, now it wont turn on.
  18. Gen1 Audio/Electrical Tutorials
    Ok since I have gotten my "Ultra Gauge" I could no longer use my auto windows down feature since they both use the OBD2 port. I went out and bought a OBD2 splitter and found that it was pretty bulky (like Bluetooth adapters) so I decided to relocate the OBD2 port. Tools needed: Your car key...
1-18 of 23 Results