Chevrolet Cruze Forums banner
p0106
1-16 of 16 Results
  1. Gen1 1.4L Turbo
    I have a 2015 Chevy Cruze Ltz. The car has about 130,000 miles on it but had a new engine installed around 79,000 miles. The car has been putting out an error code for a year for the evap syetem and hasn’t given me really any issues. I got gas Sunday and as soon as I fired it up I knew something...
  2. Gen1 Service Issues
    Hi all, I am new to this form and was wondering if anyone has experienced this before. About a week ago my 2014 1.4L Cruze was idling rough, lack of power, etc and throwing out codes: P0106, P0171 and P1101. I took it to my local Chevy dealer and they replaced the intake manifold and the valve...
  3. Gen1 Powertrain
    Check engine light came on this morning, took it to autozone and in this order codes read P0171 System too lean (bank 1), P0106 Manifold Absolute Pressure/BARO Sensor Range/Performance, P1101 Intake Air Flow System Performance, Autozone recommendation is to replace fuel injector. But knowing...
  4. Gen1 Service Issues
    Hey guys, A little bit ago I had the hissing valve cover and the missing orange dot on the intake manifold on my 2012 Cruze Eco automatic. I replaced both the valve cover and the intake manifold, making sure to put some RTV on the seams. I'm happy to report that the car feels like it's running...
  5. Gen1 Service Issues
    P0106, P0171 & P1100 - Surging at idle. *FIXED* So I fixed my boost leak bought a couple new parts, did my serpentine belt. Fired the car up and it's been idling very rough. Took it for a drive and it has it's power back but when idling it surges and the car jolts back and forth. The CEL came...
  6. Gen1 Service Issues
    So after reading a bunch of forums and watching a lot of videos, I decided that a straight pipe from the second cat back would be a good choice so that my car could breathe more and it hopefully wouldn’t cause back pressure problems, for about a day everything was fine and now at red lights my...
  7. General Discussion
    Hello All, I got in the car this morning and my CEL came on. I ran my code reader on it and got p0106 p0171 p1101 p0131 b2aaa. It idles very rough and is slow to take off. It stutters a bit until second gear. i have 52k miles on it. the only thing i have done is put a K&N air filter on it. That...
  8. Gen1 Service Issues
    2011 Cruze 1.4L Eco 6 Speed Manual About a year and a half ago, I had the well-known issue with these codes being thrown, and had the valve cover replaced. The start of that journey is here...
  9. Gen1 Powertrain
    I have a 2012 1.8L that is throwing those error codes. I have read so many different takes on how to resolve them, but nothing seems to directly answer my questions. On some of the other threads, other posters have asked if the owner has a K&M air filter in relation to those codes, but no one...
  10. Gen1 Powertrain
    Ok, so I took my belt off to check the water pump and found out it is bad. Put it all back together only to find out I have 2 codes. P0106 and P1101 To be honest, it's my wife's car and I can't say with 100% certainty that the light was not on before. I did notice that it has a rough idle...
  11. Gen1 Service Issues
    Drove the wifes car tonight and after about 7 miles I noticed a rough idle and the service stabilitrac & traction control off lights came on. Got home and scanned the car. P0106 & P1101? Also, squealing noise coming from the belt side of the engine. I have noticed a wet spot in the driveway...
  12. General Discussion
    A month ago bumper removed and my 2011 eco threw the engine code for fuel pump control module. I replaced with a non eco module, problem solved. Now am getting the codes listed above in that order. With these code combinations, does it still sound like a bad valve cover? It must be related to...
  13. Gen1 Service Issues
    I have the following codes on my Chevy Cruze Codes P0507, P1101, P0171, P0106, P015b I also have a recall on the vehicle and was wondering if the issue with the recall could be causing the codes. Also if the issue with the codes are covered under the powertrain warranty. Any info on the codes...
  14. Gen1 Service Issues
    Good afternoon. The CEL on my 2013 2LT came on today, so I took it to get the codes pulled. They read as follows; P0171 System too lean bank 1 P0106 Manifold absolute baro performance P1101 Chevy code intake flow performance I've noticed a dramatic decrease in fuel economy, as well as the...
  15. Gen1 Powertrain
    Hello, New to the forum. I have a 2012 Cruze eco 1.4L Turbo that just started running extremely rough all of a sudden and threw a bunch of codes. Vehicle idles and runs very rough, stalls, misfires, sputters, etc. Codes: P0301 - Cyl 1 misfire P0601 - PCM read only memory (ROM) - checksum...
  16. Gen1 1.4L Turbo
    For about the last 2000 miles my 2012 Cruze Eco has been showing multiple codes including P015B, P0106, P1101. I am currently at 47980 miles. Previously there were some codes related to O2 sensor and the Chevy dealer told me that the sensor replacement was not covered by warranty. Based on...
1-16 of 16 Results
Top