Chevrolet Cruze Forums banner

panels

  1. General Discussion
    Let me start off by saying thanks for having me. I purchased a 2019 Cruze at the beginning of March. I've been trying to get the dealer to recognize that the door panels are a design flaw and something needs to be done. The edge that points to the window is stupid sharp, Like I can't even...
  2. Gen1 Appearance, Body, Detailing, & Interior
    I have acquired the three rear under-body aero panels from a wrecked Eco. They were slightly damaged by the fork lift that moved the body in place in the rows. I need to know what they are made of, it seems like a fiberglass composite, and if anyone has attempted any type of repairs. More to...
  3. Gen2 Appearance, Body, Detailing, & Interior
    So the process of replacing cabin filters requires I pull off plastic panels. I notice the panel that covers the right side of the glove box and obscured by the passenger side door seems to not close all the way. Is there a way to repair these plastic panels without replacing? If this is going...
  4. Cruze Owner Projects
    2014 chevy cruze 我從使用 Tapatalk 的 SM-N950U 發送
  5. Gen1 Appearance, Body, Detailing, & Interior
    Anyone else have this issue? Looks like stone chips have literally eroded the paint over time and now the exposed metal is starting to rust. I think the previous owner drove on a lot of dirt roads. Sent from my iPhone using Tapatalk
  6. Gen1 Appearance, Body, Detailing, & Interior
    Ever since I bought this car, one thing that has annoyed me since day one is the fact that the window switch boxes in both the left and right front door panels vibrate when you have the radio turned up above 20. I’ve got the Pioneer premium audio package in my Cruze and I think it’s pretty good...
  7. Gen1 Appearance, Body, Detailing, & Interior
    I'm adding the Aero Panels to my 2011 Chevy Cruze 1LT. Just finish adding the engine shield since it did not have one when I got it. I have an couple of questions on the other ones. First does any one the part number for the rear Aero Panel that gets installed under the rear lower brace, I'm...
  8. Gen2 Appearance, Body, Detailing, & Interior
    does anyone know if the new verano or cruze diesel have these that can be grafted onto the regular cruze? I want to squeeze every MPG I can out of this thing, 47 MPG stock to at least 50MPG should be doable.
  9. Gen1 Appearance, Body, Detailing, & Interior
    does anyone know if the new verano or cruze diesel have these that can be grafted onto the regular cruze? I want to squeeze every MPG I can out of this thing, 47 MPG stock to at least 50MPG should be doable.
  10. Gen1 Appearance, Body, Detailing, & Interior
    Today I was at the dealership and noticed that the 2016 spark and Malibu now feature a type of textured paint along the very edge of the rocker panels all the way to the pinch weld. It is for rock chip protection. I didn't get a chance to look at any 2016 model Cruze. I was wondering do they...
  11. Cruze Parts
    Hello there! I have driver side, front and rear doors, door panels for sale. These aren't new...as they have normal wear from usage...but aren't junk either. I'm asking $150 for BOTH front and rear door panels. Comes complete with the switches and speaker grills...even has clips. I think this is...
  12. Gen1 Appearance, Body, Detailing, & Interior
    My 2012 Cruze LT passenger side rocker molding came loose from a few clips. Im wondering if this will cause rusting behind it? Im going to have the body shop glue it back against the car on Friday but im just concerned. The molding is still on and everything but since a few clips broke there is...
  13. Cruze Parts
    A long shot. But looking for some eco underbody/air deflector panels. Right, left and rear deflector with hardware. Will be putting up my Injen for sale.. possible trade maybe. Or if you know of an eco being parted out, shoot me a message.
  14. Gen1 Appearance, Body, Detailing, & Interior
    I own an RS with factory fog lights. I am wanting to replace the fogs with some LED DRLs similar to this: Exact Fit LED Daytime Running Light DRL Fog Lamp Kit Chevy Cruze 2009 2014 09 M | eBay Most listings claim they won't fit an RS. Are the areas of fog lights in the bumper so much...
  15. Cruze Parts
    I picked these up from the bodyshop just after they were finished being painted (Siren Red Tintcoat) but I sold my '15 Cruze a few days ago. My loss is your gain as these are brand new and never been installed obviously and I paid about $600 to buy them and have them painted. Price: $350...
  16. Gen1 Diesel General Discussion
    I'm looking to add the OEM fog lights to my 2015 CTD and the dealership is telling me that the 2015 foglight are unavailable as a stand alone accessory. Has anyone added them yet? Similar thing with the RS package rock panels, I've been told they won't work with a non-RS package car for a...
  17. Gen1 Appearance, Body, Detailing, & Interior
    So I will never again go to a car detailer. I brought it to a local place, and they must have had mr. First timer do my car. He used wax on my car, and ended up doing all my plastic panels. I tried wiping it off with water and a rag, but it did not work. I don't want to start throwing any harsh...
  18. General Discussion
    Went to install some cld tiles behind the trunk side panels and noticed a screen like vent. It's right under the tail lights and to the side bottom. It's rectangular shaped and wondering what it's for. Anyone noticed these vents when removing the panels?
  19. General Discussion
    Anyone know how to fix this? I use armor all whipes atleast 2-3 times a month but the fading seems to get worse and worse. Probably doesn't help that my car is in direct sun light and hardly kept in the garage(I get trumpeted by my dad's new f150 and my moms escape). It's worse on the cubby...
  20. General Discussion
    How do you remove the interior scuff plate panels for both the rear and front of the car? I want to run some wiring from them. I've already looked at the factory service manual information provided by alldata. It simply shows the panels being pulled up from where the clips are inserted. If...
Top