Chevrolet Cruze Forums banner
pipe
61-79 of 80 Results
  1. Gen1 1.4L Turbo
    So i have never played with and exhaust this much so i dont no if this is going to be a problem....i have a 2.25" cat back exhaust and i've been looking and putting a down pipe and a mid pipe on, but when looking for one they are 2.5" will that cause any problems? Or will it make no difference...
  2. Gen1 Powertrain
    Hey i was looking into the zzperformance down and mide pipe. But i was taking a look at the factory to zzp pipe and comparing they basically look the same besides the cat and resonator being removed. The zzp products are almost reaching 600 bucks. Wouldnt it be way cheaper if your local exhaust...
  3. General Discussion
    So i went to this local muffler shop and they quoted me $200-$250 alumanized steel and about $300 for 50/50 stainless. When i say downpipe i mean from the turbo to the catback. Is this a good or bad idea? BTW i already have a K&N short ram and cx racing intercooler. Give me your opinion!
  4. Gen1 1.4L Turbo
    Anyone know off hand the size of the pipe that the K&N cone attaches to. I am looking at replacing mine with a Dryflow Filter. Any help would be great.
  5. Buy/Sell Classifieds
    so im selling my 18inch rims and tire for 700.00 and zzp down pipe for 200.00 please text if you would like pic try to get them gone foe new project. thanks eric 253-223-2524
  6. Gen1 Powertrain
    Alright everyone i finally got the down pipe from zzp and i have a trifecta tune however i am waiting on my cable to load the tune to the car. My question for everyone is with the down pipe on i know the check engine light will come on but is the car going to run ok (no drivability issues or...
  7. General Discussion
    This is a picture of an ice lance that I believe has been forming everyday on my 365 mile daily drive. I have been averaging about 55mph in temperatures between -5f and 15f while averaging 50mpg on the DIC which is about 5-8mpg less then spring and summer averages. Now this particular ice trail...
  8. General Discussion
    Hey I picked the o2/mid pipe package up and just installed today and nice difference in sound but because the o2 doesn't have a braket to hold it in place like the stock one it and the mid pipe are vibrating a lot and I hear it hitting due to vibration. Any one have this problem
  9. Gen1 1.4L Turbo
    With the issues I'm having with the tune and throttle response, I starting looking at the exhaust. I'm convinced that a down pipe will help out quite a bit. Since I don't commute any more, I'm not entirely concerned with economy ATM. I live in California and the smog reqs are stiff. However, for...
  10. Buy/Sell Classifieds
    Yep, I want one. Used or new, let me know if you have one and how much.
  11. Buy/Sell Classifieds
    Looking for a lightly used o2 housing or mid pipe. Located in VA
  12. Gen1 1.4L Turbo
    Has anyone insulated the cold pipe coming from the intercooler to the motor? Thoughts? From the googling I have been doing and checking of other turbo type car forums, it seems to be a good idea. Can't really do any harm and if there is some good to be done with not a lot of cash, why not? I may...
  13. Gen1 Powertrain
    Has anyone insulated the cold pipe comming from the intercooler to the motor? Thoughts? From the googling I have been doing and checking of other turbo type car forums, it seems to be a good idea. Can't really do any harm and if there is some good to be done with not a lot of cash, why not...
  14. Gen1 1.4L Turbo
    Hey guys, I just got a check engine light after a day of having the ZZP down pipe installed. . . . Is this normal? Whats the cause? All responses help. Thanks
  15. Gen1 1.4L Turbo
    Just curious if any vendor is making a downpipe that is reasonably priced? Tre'
  16. Gen1 1.4L Turbo
    Wasn't sure if the mid pipe connects with the magnaflow dual system. I know the mid pipe replaces the stock pipe just before the last converter. Anyone else trying to run the same system ?
  17. Other
    Custom 2-1/4in RSX muffler delete axle-back pipe & 2in cutout piping - $100.00 OBO As the title states, i have a 2-1/4in 2004 RSX Type S Custom Axle-back muffler delete pipe (Straight Pipe) and the main body of a 2in cutout. (it only needs a block-off plate and adapter put on) I am looking...
  18. Gen1 Appearance, Body, Detailing, & Interior
    I'm looking for info or retailer with Chrome tip for the LS exhaust pipe. Thanks Greg
  19. Gen1 Powertrain
    Hello. Let me first introduce my self. I just purchased a 2011 Chevy Cruze LTZ and I am really enjoying it. I am very impressed with the quality of this car. Gas mileage is great. I drove a 130 mile trip today doing about 55-60 MPH for 60% of the distance and 65 MPH for the other 40% with...
61-79 of 80 Results
Top