Chevrolet Cruze Forums banner
piping
1-17 of 17 Results
  1. Gen1 Service Issues
    So after reading a bunch of forums and watching a lot of videos, I decided that a straight pipe from the second cat back would be a good choice so that my car could breathe more and it hopefully wouldn’t cause back pressure problems, for about a day everything was fine and now at red lights my...
  2. Gen1 1.4L Turbo
    This may be a silly question, but is there an option to only replace the intercooler inlet and outlet piping with silicone hoses and clamps vs. the o.e. plastic tube with oring piping currently on the car? If not, can I just buy the o-rings themselves or do I need to buy the entire piping? I...
  3. Gen2 Powertrain
    Finally completed installing cold air intake and my upper intercooler piping project. Love the way it looks and can feel a little bit more responsiveness. Aem cold air intake 2" tubing with 3 2" elbow and 2 2" to 2.5"
  4. Gen2 Powertrain
    Hey just curious if the new 1.4 would sound decent with a muffler delete? I can't hear the car at all and it bugs me. My old 1.8 at least had a lot of engine noise but even when this thing is at 6k you can't hear it.. Should I do a muffler delete to 2.25" piping or just put the same size pipe...
  5. CruzeTalk New Member Introductions
    Anybody know where to find intercooler piping? I don't need the big sets of piping or a $200+ manufactured one, which is all I seem to be able to find for some reason. I'd like to build my own set up. Any suggestions? Already checked the other "intercooler piping" thread and it wasn't much help...
  6. Gen1 Powertrain
    I was just looking into keeping the factory Intercooler but swapping out the plastic/rubber hoses. I'm looking for opinions or if anybody has done it yet. Thanks guys
  7. Gen1 1.4L Turbo
    Ok, I've read and read and read some more in researching things about intercooler piping on this site. Alot of threads are outdated (2011-2013) so I'm hoping that in the 2-3 more years that the cars have been on the road, that aftermarket companies have come out with just pipes instead of...
  8. Cruze Parts
    turbo super gt from vermont tuning with fmic and all piping! 800$ (5000 km) (more air flow and faster spooling + more cold air) new car new project :smile: ALL BOLT ON.
  9. Cruze Parts
    Want to buy stock oem piping cold and hot side only.. Thanks for looking..
  10. General Discussion
    2.25" straight pipe / 2014 chevy cruze: http://youtu.be/uNsxOGWrPCY
  11. Gen1 Diesel General Discussion
    The premise of Diesel is that it runs more efficiently on a very hot engine, compared to a gas engine. So, is the heat soak from the engine with a uncovered cone filter really matter in a diesel? I know it does for a regular gasoline engine... I think it would make it more efficient if the cone...
  12. General Discussion
    looking for thoughts from anyone that might be a little well versed in the science behind this. the other day i opened my hood touched the cold side of the intercooler piping and burnt my hand. i know its been pretty hot but ****. im thinking about wrapping it in that thermal insulating tape...
  13. Gen1 1.4L Turbo
    Well i picked up a cruze last night and took a good look around under the hood today. First off I know its not a race car and I dont plan on making it one, just want to do the simple small upgrades. With that said i took a look at the intercooler piping and was not to excited. It is very soft...
  14. Gen1 1.8L
    Hey guys I know I took forever to post a video of my exhaust but here it is. Let me know what you guys think. The Install http://www.youtube.com/watch?v=48rNEDF9DTY And the Take off. 2011 Chevy Cruze 1.8 LS magnaflow - YouTube
  15. Gen1 Service Issues
    I'm going to being the car in next Monday to have them take a look at this, and the bubbling sound in some of the coolant work along with my low coolant in the reservior issue. Looking at my charge piping passenger side of intercooler, is physically wet with oil. So that tells me not only does...
  16. Other
    Custom 2-1/4in RSX muffler delete axle-back pipe & 2in cutout piping - $100.00 OBO As the title states, i have a 2-1/4in 2004 RSX Type S Custom Axle-back muffler delete pipe (Straight Pipe) and the main body of a 2in cutout. (it only needs a block-off plate and adapter put on) I am looking...
  17. Gen1 1.4L Turbo
    I've build a few turbo cars, and I started inpecting the engine bay on the Cruze, and I have no plans to make this thing crank out HP numbers, but I always like to see efficency. Example my WRX, mods FMIC, equil legnth manifold, custom self designed fuel system, FMIC smallest upgrade turbo 16g...
1-17 of 17 Results
Top