Chevrolet Cruze Forums banner

plastic

  1. Gen1 Service Issues
    I took my 2014 Cruze LT into Krown for their usual rustproofing server and afterwards when I was in my trunk I found these two grommet/cap/plug things just sitting inside. I have to figure that they came from my car, specifically somewhere in the trunk, but there aren't any obvious places for...
  2. Gen2 Service Issues
    Have a 2016.5 Cruze with about 30K miles. Yesterday I drove it for 2 30-minute trips. At the beginning of the first trip there was a very strong burnt plastic smell coming into the cabin. It continued for the rest of the two trips, albeit not quite as strong as when we first started. I...
  3. Gen2 Appearance, Body, Detailing, & Interior
    Folks, I am Peter and new to this forum. I drive a 2017 Cruze Sedan. The paint in the front bumper has chipped and has become bigger. Please can you recommend me a good touch up paint brand that you have found satisfactory. There seem to be many options in ebay or amazon and not sure which one...
  4. Gen1 Appearance, Body, Detailing, & Interior
    On my 2014, 1LT RS, the triangular plastic trim piece that follows the back door window line is beginning to warp and pull away from the car. (On the passenger side.) Could be the sun is getting to it. GM calls this trim piece an "applique", part number 95991483. A closer look at the piece...
  5. Gen1 Appearance, Body, Detailing, & Interior
    Hi all, I have been noticing that the paint is chipping on the plastic bumper of my '13 Cruze. What do I need to buy in order to fix these chips and how do I go about fixing them? I have about 3 quarter sized chips and a few smaller ones here and there. Thanks! -Bwb1179
  6. Gen2 Appearance, Body, Detailing, & Interior
    This thing. How does one go about removing it? Want to see if there are any wires up there I can tap into for a n auto dimming mirror. Sent from my SM-G965U using Tapatalk
  7. Gen1 Appearance, Body, Detailing, & Interior
    Just curious, does anyone know what the plastic frame on the passenger side, front floor board that reads "VIN" is for? It doesn`t seem to have anything in it. Is the VIN stamped in the floor under it? I have a 2014. Thanks.
  8. Gen2 Appearance, Body, Detailing, & Interior
    Now that winter is over, and my Cruze just had it's 1st birthday, I'm giving her a once over in the detailing department. Any recommendations for removing white scuff marks on the black plastic? The doors make contact too frequently with my shoes... TIA
  9. General Discussion
    So I want to get my new Z Spec grille painted in gloss black. I took it to a local body shop and the guy looked at it and said immediately he won't do it. Said that textured plastic is impossible to have paint adhere to. And that it would eventually start chipping/peeling from rock chips. He...
  10. General Discussion
    Does anyone know what this piece is called? Was searching for it online but don't know what it's called won't clampdown anymore
  11. Gen2 Wheels, Tires, Brakes, & Suspension
    So I took my cruze for first free service (and recall stuff) and just noticed today they mutilated one (only one) of the plastic lug covers and they all feel super tight not hand tight (covers). Hmm say something or not? Service dpts get pretty prickly when you say damage. I dont want bad...
  12. Gen1 Appearance, Body, Detailing, & Interior
    I am in the process of installing an accessory in my Cruze and am in need of a way to glue / attach a hard plastic part to the steering shroud which is made of PP-TD20 or xenopren. It is a polypropylene variant. I can find glues and techniques to attach the same material, but not much to...
  13. Gen1 Appearance, Body, Detailing, & Interior
    Anybody know where to find such a thing for the Cruze? I don't want billet or stainless or lighted ones. Just good OEM quality matte black plastic ones.
  14. General Discussion
    Hey all! I have noticed the past few days that when I'm driving my car it starts to get like a burning plastic smell. Its definitely from the front of the car. It's not super strong but I have a 2016 Chevy crude limited. I haven't quite reached 2,000 miles. Did anyone or has anyone else had this...
  15. Gen1 Appearance, Body, Detailing, & Interior
    Where do I buy the plastic splash shield for a 2012 cruze? GM cut a big ass hole in mine when they did the recall and ever since then my shield started falling off piece by piece and now there's no plastic left from the back of the engine all the way up to my fog lights. It's causing my car to...
  16. General Discussion
    Has this happened to anyone else??
  17. General Discussion
    Just got a 15 Cruze and noticed some find scratches on the plastic that is in front of the monitor display behind steering wheel. It is not on screen but the clear plastic. Is there something that will buff them out. I'm not about to go and complain or anything.
  18. Gen1 1.4L Turbo
    I was just wonder on a 2012 Chevy Cruz 2012 LUJ turbo engine oil clearance spec's. on the; Main crank bearings______________________ Connecting rod bearing oil clearance _______________________________ They are new standard bearings and crankshaft ( not under over sized; Crankshaft Bearing...
  19. Gen1 Appearance, Body, Detailing, & Interior
    Does anybody know the part # for the plastic trim piece covering the transmitter slot (next to the power outlet)? Not sure how to post a pic, but you can see what I'm referring to here: http://goo.gl/YKByK1 Thanks for any help!
  20. Gen1 Service Issues
    2012 cruze ls 1.8 L does anyone know if you will need a entire new radiator or can the black plastic L shaped connector that goes from the radiator upper to the water pump can be replaced I think mines is leaking although the dealer deny it is WHAT im talking about is #30 in the diagram...
Top