Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

41-60 of 70 Results
  1. Gen1 Appearance, Body, Detailing, & Interior
    Hi guys, I dipped my emblems black last week. Now I'm looking to do the steering wheel emblem. Just wondering if this is easy to do and if it's ok to spray it inside the car? Pics are attached below, let me know what you think. Sent from AutoGuide.com Free App
  2. Gen1 Appearance, Body, Detailing, & Interior
    so I've had my cruze 2 weeks. the day after I bought I did the rims with black plastidip. it looked great, but its already starting to peel up in a couple spots. has anyone else had this? how long does it usually last. I did clean the rims really good. anyone got any ideas?
  3. Gen1 Appearance, Body, Detailing, & Interior
    I was looking at the silver trim on the steering wheel today and I thought, "wow if I want to did this it'll be hard". I don't want to spray the dip in my car because I don't want it to get it everywhere even if I tape it off and tons of newspaper. I would just be too nervous. So I am open to...
  4. Gen1 Appearance, Body, Detailing, & Interior
    So i gave plastidipping a go, I think it looks good but unfortunately it rained it the morning, and while I thought I had dried and cleaned everything, some water was still behind the grill and seeped out during spraying, so the dip has not adhered properly at some points, I have tomorrow off...
  5. Gen1 Appearance, Body, Detailing, & Interior
    Hey everyone, been away for a while but I'm back and have a quick question. You know the ugly as could be chrome trim underneath the windows? I'm going to black that out with the rest of the chrome on my car. I was just wondering if I could easily pop that off to paint it so I don't have to do...
  6. Gen1 Wheels, Tires, Brakes, & Suspension
    Thinking about doing my hubcaps untill I get some wheels. Any suggestions or tips? Thanks in advance!
  7. Gen1 Appearance, Body, Detailing, & Interior
    So today I tried to put on my front decal for my bow-tie as I butchered my first attempt. Well lets just say it still looks like crap. I can't seem to place the decal on without creating any wrinkles. I have OCD when it comes to this and it does need to be perfect. The rear decal looks flawless...
  8. Gen1 Appearance, Body, Detailing, & Interior
    Hello I am thinking about plastidipping the hood and roof of my Cruze tomorrow, or soon I hope. It'll be matte black as well. I was just wondering what your opinions would be on that; too much, or just right? And if it is too much I was thinking about doing the whole trunk black as well. I am...
  9. Gen1 Appearance, Body, Detailing, & Interior
    Hey guys, I just got my Cruze last week, 1LT, with RS. Today I attempted to plasti dip the bow ties and wheels, just wanted feedback on what you guys think.. or any suggestions? Thanks! Sent from AutoGuide.com Free App
  10. 👋 CruzeTalk New Member Introductions
    Here you guys go. I know that its only aesthetics, but I'm working on sleepers. Being 16, I have a somewhat "limited" budget ;)
  11. General Discussion
    I'm redoing the rear bowtie and thought I'd post a pic of what it looks like with the original bowtie with black trim. I'm having to redo it because I was too lazy to take off the vinyl overlay b4 I did the plasti-dip which was a mistake. The vinyl overlay began to peel up on both the front and...
  12. Gen1 Appearance, Body, Detailing, & Interior
    Wassup guys.. this frog is stupid.. Im posting from my phone so excuse my grammar.. I debadged the cruze letters and some adhesive remover fell on the chrome bar that was plastidipped, now there is a piece of chrome showing... do I need to redo it? Or is there a trick to it? I am real tight on...
  13. Gen1 Appearance, Body, Detailing, & Interior
    Anyone Plastidip their whole Cruze? if so how do you like it? Was it easy?
  14. Gen1 Appearance, Body, Detailing, & Interior
    I am painting my rims today. Sent from my Droid using AutoGuide.Com Free App
  15. Gen1 Appearance, Body, Detailing, & Interior
    Charlie got her first PlastiDipping today! It was breezier out than I expected it to be, making overspray a pain in the tailpipe, but it was worth the headache: <-- ran out of newspaper... wrapping paper works too! I have a few other plans for the rest of the can of Plastidip, but...
  16. General Discussion
    I didnt realize how much work was involved with this, lol, but I got the rally stripes on the hood and the rear chrome done. I want to stripe down the front and the roof and trunk, and dip the wheels for winter. Those will be for another day. What do you guys think?! Sent from my DROID...
  17. Gen1 Appearance, Body, Detailing, & Interior
    I'm torn between either black plastidip-ing my bowties or do a color match overlay on them. My car is a 2011 1Lt with the RS package silver. Pictures of my car are in my garage on here. Here's a link to the overlay GrafxWerks - Bowtie Overlay (Front) // Chevrolet Cruze so any thoughts?
  18. Gen1 Appearance, Body, Detailing, & Interior
    O.K. I'll get straight to the point - I'm not a huge fan of the beigeish off-white that the accent panels are in the LS. The only upside is the PU-esque material they are made out of, and they wipe down super easy. However, I just feel that the car would look much better with a different colour...
  19. Gen1 Appearance, Body, Detailing, & Interior
    Hey all! Finally got some free time to get my little project done. I don't like the look of the Eco rims when they get Plastidipped in Black. Then I found out it comes in white! Looks Racey!!! So to sum it up, Eco wheels, white plastidip, Labatts, and black spray paint for the lug-nuts. Also as...
  20. Gen1 Appearance, Body, Detailing, & Interior
    Hey, I found 2 cans of black plasti-dip and came up with some photoshop renders of the front, I'll work on the rear later. Let me know which one is better and what I could add or remove to help the design :)
41-60 of 70 Results
Top