Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 99 Results
  1. Gen2 Diesel General Discussion
    I recently took a vacation where I drove my 2018 Cruze Diesel west to Seattle, visiting several national parks along the way there and back. While in Olympia WA I had an oil change done by a Chevy dealership. The next day I took a drive to Olympia National Park and within 10 minutes of leaving...
  2. Gen2 Appearance, Body, Detailing, & Interior
    Just a quick question if anyone knows how to remove the light cover on a gen 2 sedan license plate light? There are no visible screws I see to undo to remove. So, for the life of me I've tried looking for ways with trim removal tools to get this cover off but no luck.
  3. Gen2 Diesel General Discussion
    Does such a thing exist? The craptastic GM offering is lacking in design. So the forward edge of the access flap for the oil filter does not have a fastener. So if the dealer monkey doing your 1st oil change does not secure it properly then it hangs down and snags. The dealer says its on me...
  4. Lighting
    Can someone recommend a place that sells and installs these for a 2018 model?
  5. General Discussion
    2011 Cruze with a broken 3-5-R Wave plate broken in transmission. Any advise on getting it repaired? Dealer pushing a replacement but the car only has 54,000 miles. Is there an extended warranty or any other help in getting it repaired? Thanks,
  6. General Discussion
    Had my coilovers installed and there is metal to metal noises coming from front right corner. I noticed there’s a pretty decent gap between the top strut plate and frame of the car. I got a strut bar to hopefully fill the gap and make everything secure but there still movement and the strut bar...
  7. Gen2 Appearance, Body, Detailing, & Interior
    Happy Easter Hacked an oem US holder to accommodate the Euro plate from Wolfsburg Germany (off my 2016 VW Golf Wagon). Looks sporty as heck in my opinion. Other fun and unique projects on the horizon... Sent from my SM-G965U using Tapatalk
  8. General Discussion
    I just got a letter via usps stating my first pick out of 6 choices is mine and Oklahoma takes 4 months for the plate to arrive. I will be getting TOMCRUZ Am surprised it wasn't taken. Wanted it for some humor/smiles. Do you have a personalized plate for your Cruze? I had think on it for a...
  9. Cruze Parts
    Looking for a Gen 2 Cruze front license plate holder that will fit the Gent 2 RS front bumper. Ideally, one that includes the needed hardware to mount. :th_coolio:
  10. Gen2 Appearance, Body, Detailing, & Interior
    Looking for the larger plate holder found outside of the US market on most if not all Cruze models. Anyone have a source for hard to find parts such as these? Argentinian built Cruze Chinese Built Cruze (looks like the lower grille plate holder is molded?) Cool blue too!
  11. Cruze Parts
    I have for sale a clutch friction disk and pressure plate for a cruze/sonic... I was unaware that there were two different sizes and of course I got the smallest one when I needed the bigger one... I ordered everything as a set online and since I used the slave cylinder Im unable to send it...
  12. Gen2 Appearance, Body, Detailing, & Interior
    Hello Everyone, I purchased a 2017 Redline and I'm trying to remove the front license plate bracket. It looks like it has metal rivets attaching it to the grill. Has anyone removed one on a 2nd gen? Thanks
  13. Gen1 Diesel General Discussion
    So, as I had mentioned in the couple of recent threads about cleaning the throttle plate and EGR valve, I wanted to check ours and clean if needed to combat some running/starting issues my wife has been encountering in the past months. I started at about 8PM, so it was pretty dark, but that...
  14. Gen1 Appearance, Body, Detailing, & Interior
    I've recently tried installing a skid plate and front splitter to my cruze because I've exceeded my budget on engine mods for the moment so I thought I'd start working on the aero. One problem came to mind... I heard earlier models were recalled because the skid plate from the factory wasn't...
  15. Gen2 Appearance, Body, Detailing, & Interior
    Hey guys. Has anyone used a universal tow hook relocation kit for their license plate? What vehicle are the threads similar to? Im hoping BMW, as i just ordered a kit. lol
  16. Gen1 Powertrain
    Hi all, Last week I noticed my 2012 Cruze was having trouble shifting between 2nd and 3rd gears (it would rev really high and then eventually catch 3rd gear). The following day I couldn't reverse. The diagnosis from the dealership is a broken wave plate and quoted at $3650 to fix. I've noticed...
  17. Gen1 Audio, Electronics & Electrical
    Hi, I have a 2012 Cruze and I have a after market radio.DVD, NAV system that included a camera that replaces the factory license plate light. does anyone have a video that shows the procedure to replace the factory light with the camera as well as route the RCA cables to the dash? I have just...
  18. CruzeTalk New Member Introductions
    Hi Everyone, I'm new to this forum. Need help to install front license plate bracket. Thank You clrkbr9476:confused:
1-19 of 99 Results