Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 25 Results
  1. Gen1 Wheels, Tires, Brakes, & Suspension
    Does anyone have photos of the front strut mount plates for an LT or equivalent? I want start my strut replacement and my friend, a Chevy Mechanic, says the plates are wrong. I need to contact the place I mail ordered them from post haste. Thanks in advance These are the plates I purchased.
  2. 👋 CruzeTalk New Member Introductions
    Has anyone installed the #13478514 illuminated sill-plates in a 2017 Cruze Hatch? If so, and you still have the instructions, it would be great if you could post them here since I want to see how the electrical connection is made. I was hoping that the connector would be below the factory sill...
  3. Gen1 Appearance, Body, Detailing, & Interior
    I'm at a GM dealership right now and was hoping they could install the illuminated door sill plates (the GM ones, not aftermarket). They told me it'd take 2 whole hours to install! Their labor rate is $134/hr and there's no way I'm paying $268 to have these installed! What I want to know is if...
  4. Cruze Parts
    Selling a brand new pair of LED door sill plates that illuminate white and red from side to side when you open the car door. After 30 seconds they begin to pulse, and then auto shut off after 3 minutes so it can't drain your battery. I designed these custom for my 2013 RS and they look...
  5. Gen1 Appearance, Body, Detailing, & Interior
    I was busy putting my new "PATMAN" plates on tonight. New on back, old on Front the old ones are better plates! They are actually pressed out with bigger lettering. The new ones aren't pressed out but painted on and smaller letters. But it is still "PATMAN" You can see in my avatar.
  6. Gen1 Audio, Electronics & Electrical
    Anyone bought or heard of these illuminated door sill plates: Car Styling LED Moving Door Scuff for Chevrolet Cruze Led door sill plate 2009 2014 Cruze led moving door sill plate pedal steps-in Mounts & Holder from Automobiles & Motorcycles on | Alibaba Group Specifically, I am...
  7. Buy/Sell Classifieds
    I have a GM illuminated sill plate kit, GM NEW in box. Bought to put on my car, haven't gotten around to it yet, don't expect to, plus I've got a wedding to pay for! Part number 95470931. I've seen them going on eBay for $250+. I'm selling my kit for $200 shipped. Looking to move this ASAP...
  8. General Discussion
    Just today I installed door sill plates I purchased from ebay that light up. To those who have these types as well as similar ones that don't light up, have you experienced scratching from the doors weather stripping making contact with them. This is quite annoying. I have them installed as...
  9. General Discussion
    I was thinking about seeing how much vanity plates cost and if they aren't too much getting them. What is ya'lls opinion on them though, are they tacky, or are they only tacky if they have your name? Would it be stupid to get a LDYCRZR one? If you have vanity plates, what do you guys have...
  10. Gen1 Appearance, Body, Detailing, & Interior
    Are these really genuine GM? I threw out a $10 bid on Ebay and won these. They're in the states not over seas so I think they're legit but if that's true how in the world did he just sell these for $10!!!!?! Sent from Free App
  11. Gen1 Appearance, Body, Detailing, & Interior
    I was thinking of getting a set of door sill guard plates as that's an area I tend to scratch up a lot on vehicles. Anyone have suggestions on a nice set? I have a Silver 2012 LT2 RS with the two tone brown/cream leather interior and was wondering if the OEM 19202364 set would look good on it...
  12. Cruze Owner Projects
    Just got my door sill installed.. and have to say they look great. Bought them on amazon for rather cheap so was sceptical.. but they are tough built and very bright ( at night ). Let me know what you guys think These are front and back.. 4 pieces. Came with wiring kit. But had mine installed...
  13. Gen1 Appearance, Body, Detailing, & Interior
    I'm thinking about putting these into my car, but I'm not quite sure.. any thoughts? Chevy Cruze Glow Plates
  14. Gen1 Appearance, Body, Detailing, & Interior
    Just got my headlights installed this past weekend! The glove box trim and scuff plates are really straight forward and cheap and easy to install mods which adds a nice touch of personalization to my car. Getting HIDs installed this Wednesday too.
  15. General Discussion
    just dropped my cruze LTZ "RS" on paper plates, just the eibach coils, cant afford the coilovers , since this is my family ride. spending the most of my money working on my truck. sorry for the crappy iphone pics
  16. Gen1 Appearance, Body, Detailing, & Interior
    Whose got em / had em? Any cool ideas? I want to get a pair.. No I'm not vain.. I just want something different. Im sick of this ALKSDLK 99829382 thing snooooooze. I'm not going to do anything too stupid like "BG PNIS" or anything LOL
  17. Gen1 Appearance, Body, Detailing, & Interior
    I'm wanting to change my plates on my Cruze. I need some help deciding what to get. I currently have plates that say WOA AWSM, which is what I had when I had my SS Impala. I want something not to stupid but to go along with driving a turbocharged Cruze. Any help would be fantastic. It has to...
  18. Gen1 Appearance, Body, Detailing, & Interior
    Looking at these on ebay, anybody buy any?
1-18 of 25 Results