Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Gen1 1.8L
    Bought a 2013 with the 1.8 liter on January 18th of this year with 142,000 miles. I had to replace the coil pack on it early on, and now I'm having an issue with the vehicle idling rough on startup, or stalling, and sometimes, though rarely, it revs way up and won't idle down. Gave me stability...
  2. General Discussion
    Hi, I’ve had this code come on last month (P0496) on my 2012 Chevy Cruze. I researched and changed out my purge valve but the check engine light came back on two days later. Has anyone dealt with this or knows what I should look into next??
  3. Gen1 1.8L
    So I got a P0496 code on my 2012 LS. I thought it might be the purge valve because that's what most people say it is. So I disconnected the hose attached to it on the left to check for a vacuum leak and there is strong vacuum coming from that hose. NOT the valve. There should be no vacuum at...
  4. Gen1 Service Issues
    I put on an intake the other day. I was very careful not to bend/break anything. It was a cheap one. I did everything right. No power at all and no check engine light. I decided to look into it today and upon driving around, I could hear a loud hiss like it was leaking under boost, I could...
  5. Gen1 1.8L
    Hi all, I currently have about 75,000 miles on my Cruze. Over the past few weeks I have been unable to start my car after fueling. If I floor it and crank for a little while it will eventually start. This sound like emissions to me. The question I have is would it be the purge valve or the...
1-5 of 5 Results
Top