Chevrolet Cruze Forums banner
reading
1-19 of 30 Results
  1. Gen1 Service Issues
    The electronic reading on my 2017 ls jumps anywhere from 12.7 to the 15.2 that is sitting at right now. First thought is the battery, I'm more wondering if the fluctuation is just normal for the vehicle.
  2. CruzeTalk New Member Introductions
    I'm a new member with a 2012 Chevy Cruze Eco I bought brand new in 2011 with 11 miles on it. Blew the engine at 86k miles under warranty. Now up to 165k ish and starting to have what seems to be common, impossible gremlins! Service Stabilitrak/Traction Control, underboost error code causing...
  3. Gen1 Diesel Technical Discussion
    Hi, just curious what people are seeing on their temperature gauge once warmed up and driving? Typically the needle should always be about 12:00 is the old school guideline. (or I guess 6:00 on these, right?) Mine seems to be stopping quite a bit short of that. about 8-7:00. (1/4 - 2/3) I...
  4. General Discussion
    My Cruze 1.4t eco required a coolant change. Following the tutorial on here, everything went to plan. However when it got to filling to car with the straight coolant, it took the whole gallon. I then added 50/50 dexcool to get it to the level. I took the car for a run and no problem. I...
  5. Gen1 Audio & Electronics
    Hey guys need some help with my 2011 Cruze LT. I have searched this forum and found many with the same problem, but not many people are telling how the problem had been solved. Here is my problem, one month ago I changed the lock actuator on the driver side front door because it was failing. A...
  6. Gen1 Service Issues
    I have a 2014 Chevy Cruze. The hood ajar switch is not reading that the hood is closed (or open). When I open the hood, I do not get the notification on the dash that the hood is open. My remote start does not work, which I believe is because the computer can't confirm that the hood is...
  7. Gen1 1.4L Turbo
    Ok Guys and Gals new to this but here goes To make a long story short my wife's car had the famous A/C OFF DUE TO HIGH ENGINE TEMP I did some trouble shooting and figured it was just a sensor because it was not over heating so changed both sensors (radiator and water outlet) did not fix problem...
  8. Gen1 Audio & Electronics
    So my recent purchase has a few issues. Its a 2012 LT RS with 100k on it. I rebuilt the car from a crash.( Just body fixes) But the onboard instant mpg and mph reading isnt showing anything? It should change right? Its got a 0 with a line through it for both spots? Could this be a combo of bad...
  9. Gen1 Audio & Electronics
    Hey Does anyone know where the speedo gets its reading from?? Thanks Sent from my iPhone using Tapatalk
  10. Gen1 Diesel Technical Discussion
    Was at the shop ready to install the trifecta tune and give before/after readings....where do they hookup the tach pickup for the cruze diesel? Tried the glow plug and nothing
  11. Gen1 Wheels, Tires, Brakes, & Suspension
    Hey all. Here's the back story. I have a '14 ECO and when I bought it, the dealer swapped out the tire air for nitrogen, as part of the ECO package. Now that I have moved, the dealer here does not have a nitrogen machine, but I did find a tire shop that offers lifetime nitrogen for $25...
  12. General Discussion
    After owning the Cruze for close to 4 years, I'm just getting around to installing and playing with the Torque Pro App. Last night I noticed the enhanced GM PID list supported and read something labeled oil temperature on the 1.4L. Anyone else seen this? More importantly can anyone confirm or...
  13. CruzeTalk New Member Introductions
    So are the 2014 cruzeszzz perfect or just haven't found the bad stuff yet? there's not to much on here about them?? (good or bad) Im thinking maybe not enough time has passed yet.. That being said, Im definitely going to change my trans fluid to the Amsiol 75w-90. Cause Im getting 1st to 2nd...
  14. CruzeTalk New Member Introductions
    Not so new, been reading all over this site. new to post So are the 2014 cruzeszzz perfect or just haven't found the bad stuff yet? there's not to much on here about them?? (good or bad) Im thinking maybe not enough time has passed yet.. That being said, Im definitely going to change my trans...
  15. Gen1 1.4L Turbo
    Does anyone know the Arbitration ID and the PID ID to read the torque? The GMLAN database I have, has the ECM USDT_Req_to_ECM_HS arbitration ID as 0x7D0. Just wondering if anyone knows for sure if this is the arbID and what the PID number is. I have my own CAN tool and OBDII connector to...
  16. Gen1 Audio & Electronics
    So I have a basic code reader I have used for years, but I do not see where to connect it on my ECO, SHould I feel stupid I dont see it or is this normal ?? Just give me a hint lol :uhh::brave:
  17. General Discussion
    Do you guys/gals that use the Torque app see a 5-6 MPG difference between the app and DIC, with the app reading lower? I know that the DIC is already optimistic based on my actual calculations of fuel used/miles traveled. Does the app calculate it better?
  18. Gen1 Audio & Electronics
    Hello guys. I went out to my car today to make a call to onstar to update my account information with my car insurance company, and I happened to look at my radio screen and noticed that my temperature was reading in Celsius instead of Fahrenheit. It was just reading in Fahrenheit the other day...
  19. Gen1 1.4L Turbo
    What can I use to read and/or visualize datalogs?
1-19 of 30 Results
Top