I just got a Cruze with a Reese hidden hitch attached:( I would like to have it removed as I will never be needing or using a hitch and don't want the rust that comes with it:(.
Can it be removed by taking off the 4 bolts (2 per side) without lowering the exhaust, which I don"t want to do I...
First off, I apologize if this is in the wrong forum section.
So, I am a bit of a newbie when it comes to DIY car repair. My driver's side window has come off its track and I'd like to fix it myself without paying $300 at a body shop.
I know the motor still works, so it isn't an issue there...
Just a quick question if anyone knows how to remove the light cover on a gen 2 sedan license plate light? There are no visible screws I see to undo to remove. So, for the life of me I've tried looking for ways with trim removal tools to get this cover off but no luck.
I have a pair of speakers I want to install in the dash, but the plastic gets in the way. They'll fit once i get past the plastic and into the metal framing underneath. I've looked for instructions on how to remove the dash and haven't found any. Has any one done it or know how to...
I learned something new today:
Both positive and negative battery cables at the battery are torqued to 40 in-lbs
The battery plate nuts are torqued to 106 in-lbs
and the battery hold down arm is torqued to 80 in-lbs
I'm going to jump on the Cruze next week and replace the forward mainseal, which is chirping due to the pcv failure.
Has anyone here done this, any tips, also does one need to use a puller?
I ask because I just removed my honda odyssey flywheel the other day and didn't need to use one it...
Has anyone tried to replace their fuel filter yet on a 2nd Gen?
I attempted to the other day and the whole housing twisted out of the crap plastic wedge mount.
I even took the whole thing off the car strapped it to a bench and I thought I was going to break the cap in two.
I plan on...
New to the forum. Been browsing and couldn't find my answer so figured I'd register and post. I'm wondering if anyone has any idea as to what this alarm is? I checked the manual, I checked online, etc... can't figure it out. I bought the car a couple weeks ago, and it wasn't doing it at...
I'm working on replacing the lock actuator assembly on a 2012 1LT. Has anyone gutted these doors or worked with the lock rod adjustment?
Getting the lock rods off the lock assembly is quite the art of patience. I'd like to remove the lock assembly and the rods together. But to do this I must...
So my drivers power door lock does not move with the keyless entry remote or the button inside the car. It does work manually with the key, and if you push the button down from the inside.
Has anyone had one of the front doors from a GEN1 apart inside? It appears based on my searching that I...
All credit goes to the author. I don't think this has been posted before. Actually it looks fairly easy. Removal of the plastic parts isn't that bad. Take your time and use trim removal tools, and you will be just fine.