Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 65 Results
  1. Gen1 Appearance, Body, Detailing, & Interior
    Hi Just wondering if its possible to remove the bowtie logo on the steering wheel, without to much effort? Does anyone know if it's glued on, or maybe bolted from the back somehow? It's af 2010 model - EU version.
  2. General Discussion
    Good morning everyone. I'm trying to take off my driver's seat head rest so I can put on an aftermarket seat cover to preserve the condition of my driver's seat. I've been searching youtube but they only go up to 2014, and the dealer where I just recently bought my car is no help (what's new?)...
  3. Gen2 Appearance, Body, Detailing, & Interior
    I have reviewed a few threads where this problem has not been resolved. I have tugged on it while turning it left/right and it does not budge at all. Trying to remove the console, which is impossible without getting the shifter plate off. Not entirely sure why it is so important for GM to make...
  4. Gen1 Powertrain
    Humming noise while accelerating and Whining Noise while removing leg from Accelerator I Own Chevy Cruze 2013 Automatic Transmission 1.4 LS with odometer 130K, i have humming noise while accelerating and whining noise while removing leg from Accelerator.I have a doubt whether its from bad...
  5. Gen1 1.4L Turbo
    Humming sound during accelerat and whining noise while removing leg from accelerater I own Chevy Cruze 2013 Automatic Korean with GCC Spec 1.4 engine already crossed 130k owned it before 2 months. Now i am hearing humming noise while accelerating and bed whining Noise while removing leg from...
  6. Gen2 Appearance, Body, Detailing, & Interior
    I'm thinking about applying a new coat of wax in the near future. As I've been washing my Cruze about once a week, I've kept the car quite clean. However, I've notice these tiny ball-shaped contaminants stuck to the hood and roof (see line of spots in attached pic). I've been reading stuff...
  7. Gen1 Appearance, Body, Detailing, & Interior
    I am trying to remove the sun visor on a 2014 Chevrolet Cruze eco. I have taken the cover off the mounting plate that secures the visor to the roof and removed the 3 screws on the mounting plate with a T-15 Torx screw driver. The problem is that the Sun Visor with the mounting plate is still...
  8. Gen1 1.4L Turbo
    Stock 2013 Cruze 1.4 Auto 102,500 miles Past few months I've been hearing a squeaking coming from under the hood of my car. At first I thought it was the serpentine belt, so I replaced it with no luck. Then I thought it was the serpentine belt tensioner, so I replaced that with no such luck...
  9. Gen1 Appearance, Body, Detailing, & Interior
    I am considering vinyl wrapping the chrome door strips and need some information / help on removing the strips, sourcing some good vinyl, and also the best way to actually wrap them. I would like to black them out. Any suggestions? I did a cursory look for threads but found mostly plasti-dip...
  10. Gen1 Appearance, Body, Detailing, & Interior
    i was watching a youtube video of a guy remove just that one duct under the airbox and called it done. at first i thought that was all there was to it but i seen a comment to the video: I attempted this today and realized you also have to remove the resonator box underneath that sleeve you...
  11. Gen1 Appearance, Body, Detailing, & Interior
    Has anyone removed this piece on their Cruze?As you can see, the chrome trim fell off.It looks like it just pulls off
  12. Gen1 Service Issues
    Does anyone know a step by step process on how to remove the stock intercooler. I know how to get the bumper off but not sure how the intercooler comes out any lines need to be disconnected and does it come out from top or bottom. I need to clean it out had dealer replace the whole throttle body...
  13. Gen1 1.8L
    Hi all. I am having trouble removing the exhaust manifold from my 1.8 Cruze. I have followed the below instructions and the manifold is free but its obstructed by those AC hoses and I cant pull it up and out or down. I just need to remove it so I can replace the gaskets/seals on the oil cooler...
  14. Cruze Owner Projects
    So I have a dark blue cruze how would I remove the ugly white pinstripes which seem to be just tapped on thanks Sent from my SM-N920T using Tapatalk
  15. Gen1 Audio, Electronics & Electrical
    i have a friend that is waiting for the arrival of his 16 cruze. i put a fully aftermarket stereo in his last vehicle that he wants to put in the cruze. the speakers, amps, and subs i am not worried about... the head unit, however, worries me. he says it has a 7'' touch screen in the dash...
  16. General Discussion
    Just wonder how to remove to fog light bezels. I want to take them off to tint the lenses blue, but don't want to go start ripping things off, because knowing my luck I would break them I had a quick look last night but couldn't see any obvious ways to do it
  17. General Discussion
    Hey Guys I wanna Carbon Fiber wrap my hood its really cold so i wanna remove my hood and do it in my room but my question is will it just bolt back on or will it be out of adjustment... my dad said it will be but i cant see how? any suggestions thanks:)
  18. General Discussion
    So today I did some investigating on what it takes to remove the upper 2 grills. After poking around, it appears the front bumper cover must be completely removed? Did I miss something? Is there a work-around to replace the front grilles? Any ideas would be appreciated. Thanks, James
  19. Gen1 1.4L Turbo
    Hi, Can anyone help please: Trying to remove the cooling fan shroud on 2011 Cruze 1.4L turbo. The manual says "Unclip the 4 clips" but how exactly do you do that?? Been out there for hours and getting absolutely nowhere :(
1-19 of 65 Results