Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

21-40 of 124 Results
  1. Gen1 Audio, Electronics & Electrical
    Unplugged antenna from the Onstar module. Installed this new system with tons of features. it works with climate control display, all car info display the old one used to show, all of the sounds like signal lights, chimes etc. using IGO for navigation. it does not play CD or DVD.
  2. Gen1 Powertrain
    Hoping to find a job aid or something to give some direction on how to replace the starter. I have a 2012 Cruze 1.4t. Took it out on lunch and at the end of the day it would not start. When I press the Start button the pump primes and I can hear one single click. I did try to jump it just to...
  3. Gen1 Service Issues
    Does anyone have a procedure for how to remove and reinstall the ignition lock cylinder? The service bulletin PI-1329 says that the cause of problem of the engine trying to start by itself when the key is in, but in the lock position, is the lock cylinder. Those who have had it replaced at the...
  4. Gen1 Service Issues
    Hello All, Looks like something ate a piece of my Windshield Wiper fluid line and I am going to need to replace it. Unfortunately, the cut is deep in the engine bay and I have no idea how to reach it. Here is a picture of the washer fluid tank, and about as clear as I could get it and here is...
  5. CruzeTalk New Member Introductions
    Hello, Hope that someone can help me. I have a cruze lt 2011 with a stock gps unit. The Maps are soo old and updating is very expensive. For that reason I want to change it for an aftermarket one. Now I read somwhere that the stock gps unit has a different canbus than the stock radio unit. Is...
  6. Gen1 Service Issues
    Hi everyone, I'm having an issue installing a blower motor resistor to my 2013 Cruze LT. I've removed the panel under the passenger side dash and can see the blower motor. My problem is I can't tell where the blower motor resistor is at. Does anyone know of an instructional video that details...
  7. Gen1 Appearance, Body, Detailing, & Interior
    Does anyone know how to replace the retainers that the roof molding clips on to? I had to replace those prices of trim because the somehow dried out and cracked. Well when installing the new ones the clips broke off in some places. Now the new trim won't stay flush.
  8. Gen1 Wheels, Tires, Brakes, & Suspension
    This whole situation is rather interesting but i'm going to do my best to explain the situation as best as possible, please bear with me. This is all for a 2013 Chevy Cruze Eco. I was in the market to change my wheels and acquired a set of XXR 530 18x7.5 rims. They have a bolt pattern of 5x100...
  9. Gen2 Appearance, Body, Detailing, & Interior
    I am planning on replacing my brake light bulbs with LEDs, and can't seem to find a thread or post explaining how to do so. I have pulled the side carpeting in the trunk back and I can see the wiring going into the housing but cannot see how to get to the actual bulb. Created this thread so that...
  10. Gen1 Wheels, Tires, Brakes, & Suspension
    My origional Continental tires on my 2014 cruze 2lt have about 4 32nds left, and they are starting to produce some road noise and I am not a huge fan of them. I found a set of Michelin energy saver tires for sale for $150 with about 60% tread life left (which by my calculations means there is...
  11. Gen1 Engine/Transmission Tutorials
    How-To: Replace 2011-2016 Cruze 1.4L Coolant/Water Outlet Overview: The coolant/water outlet on the 1.4L Turbo engine has a high rate of failure and typically begins to leak at the joint between the water outlet and the recovery tank hose. The repair involves replacement of both the water...
  12. Gen1 Audio/Electrical Tutorials
    How-To: Replace Broken 2011-2016 Cruze Key Overview: This tutorial will show you how to replace a broken Gen1 Cruze key. As long as the blade of the key is intact, this tutorial will allow you to replace ANY key damage. Note: you will need to have one functioning key in order to perform this...
  13. Gen1 Wheels, Tires, Brakes, & Suspension
    Have 47,000 on the orginal Continental Tires. Great tires I think for both ride and handling but expensive. Any thoughts about best tires to replace?
  14. General Discussion
    This has been asked before i bet is replacing the battery easy what are the steps? I got me a Dihard from Kmart for $100 eager to put it in on my own but never done it before.
  15. Gen1 Audio/Electrical Tutorials
    Quick write up in case your USB gets worn out like mine did. Tools needed: 8mm socket razor blade pliers flat head screwdriver small hands USB wire and mobile for testen. Part: USB Port $15 new Ebay 13349323 USB Port Console Compartment Mounted 2011-15 Chevy Cruze | eBay Video...
  16. Gen1 Brakes/Suspension Tutorials
    Here is a video I made for you all, since you've all helped me with issues in the past. I figured I should contribute to the community. At minute 3:19 of the video, you'll see what exactly it sounds like when the vacuum pump and pipe is functioning properly. At minute 1:43, you see what it's...
  17. Gen2 Audio/Electrical Tutorials
    ... Since rear door speakers are sounding very weak and cheap like the previous generation cruze, i decided to replace them with something better and add some to the rear deck. i was hoping it is as easy as in the previous generation cruze... but no, its a little worst. I will try to explain...
  18. Gen1 Appearance, Body, Detailing, & Interior
    Hello all. This may have been discussed in an earlier thread but, I couldn't find it. Can anyone explain how to remove the top lid portion of the center console/armrest so that I can replace the upholstery? Kind of nervous about moving the box due to the usb and aux. Thanks in advance!
  19. Chevrolet Cruze News and Reviews
    Read more about Replace These 5 Parts for Better Mileage.
  20. Gen1 Diesel How-To & DIY Library
    Since there are a few documented cases of these bolts shearing off and other cases where dealers are replacing them voluntarily, I decided to change mine out since I am outside my warranty and I had significant laminar corrosion all over the flange. I also have a persistant P11D7 code (may or...
21-40 of 124 Results
Top