Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 81 Results
  1. Gen2 Powertrain
    Hello, I have a 2016 Gen 2 and the clutch was sitting flat on the floor, the dealership replaced the slave cylinder and it worked for about 2 months and then it happened again. Car is again at the shop and now they tell me its the master cylinder, it comes to just over $1000 to replace it, I...
  2. Gen1 Wheels, Tires, Brakes, & Suspension
    Does anybody know the rotor size of a 2015 Chevy Cruze LT looking to replace him with a aftermarket brake kit but they need the rotor size
  3. Gen1 Service Issues
    So I'm trying to replace the wiper transmission linkage assembly on our Cruze and from what I gathered last night a number of people on this forum have had the same issue. I picked up the part today and started taking the old one out. The bolts and nut all came out easy enough but I can't seem...
  4. Gen1 Diesel General Discussion
    Has there been any definite insight as to what will replace the Cruze diesel? Also, is the Cruze HB still going to be sold in the states since it's made in Mexico? Inquiring minds want to know. If this has already been discussed, I am sorry, but discuss it again...lol.
  5. Gen1 Service Issues
    I have a 2011 Cruze eco with a manual transmission and 150K miles. I was getting a bad smell, especially when idling after the engine was warm. Diagnosed oil leaking on cat and fixed it by replacing the oil cooler seals. Biggest job I've attempted on my own and the air is clean now. Heat is your...
  6. Gen1 Audio, Electronics & Electrical
    After replacing my Cruze 2011 sterling wheel the audio functions button doesn't work i have a chevy cruze 2011 it cames without a multifunction sterling wheel so i decided to change it with an orginal chevy cruze sterling wheel with cruise and audio buttons controlled but the buttons doesn't...
  7. Gen1 Diesel Technical Discussion
    So I still had my old battery sitting on the garage floor since replacing it after it started to offer weak cranking amps when the Chicago winter weather set in last November. I've been watching some videos about restoring AGM batteries and saw that adding some distilled water to the slightly...
  8. Cruze Owner Projects
    Due to a failed check valve and a cracked piston I was forced to replace my engine in my 2014 1.4t auto trans. I'm having issues mating the motor to trans. When I get them really close together and the bolts tight the motor won't turn over. And if I back them out the motor spins freely. I...
  9. Gen1 Wheels, Tires, Brakes, & Suspension
    Hello everyone I am having trouble w replacing the rear arm on the watts link any ideas how to do this? Long short story I backed over a concrete parking stop and bent the lower arm. Have the new one but it's been a pain trying to get it on.. so kinda stuck at the moment any ideas would be...
  10. Gen1 Wheels, Tires, Brakes, & Suspension
    I'm going through trying to replace my rear passenger hub. The bearing has been growling and I'm finally getting around to replacing it. I'm having a bit of an issue. I saw on another site that I need to take off the speed sensor. The only way that I see that it can be taken off is by removing...
  11. General Discussion
    My car has developed a chirp/squeak. It's coming from the belt side and the only logical thing I can think of is the idler. Pricing parts I've discovered that they range from 40-140 at local parts stores. I did see one on the net that's says original gm, for $33. Looks like I may order that...
  12. General Discussion
    My check engine light turned on and Autozone said I needed to replace the fuel injectors, so I changed all 4. Now the light is still on....I dont know what else it could be. Took it back to autozone....now they say its the Mass Airflow Sensor. When I was changing the injectors, I mistakenly...
  13. Gen1 Wheels, Tires, Brakes, & Suspension
    I was wondering if anyone else has replaced the rear drums on their gen 1. I have 68K on my 2013 RS and they don't stop(assist stopping that great) and I adjusted last night and it seems whenever I adjust the rear drums on this car, the removal and replacement of said drums is more difficult...
  14. General Discussion
    Hello' Hoping I can get some advice..i have a 2011 cruze 1.4 turbo with 153,xxx miles and cant get rid of this p0420 code. Ive had the up and downstream 02 sensors replaced, ive had the cat replaced and ive replaced the turbo. I dont know what could be throwing this code..im also getting the...
  15. Gen1 Service Issues
    Just like the subject says, I'm in the middle of replacing the Radiator on my 2011 Cruze ECO and I realized the new Radiator I ordered is for an Automatic Transmission, because it has the two extra holes with fittings for the transmission coolant. :( Can I still use this Radiator? I assume so...
  16. Gen1 1.4L Turbo
    Chevy cruze had engine light on and rough idle. I replaced the camshaft cover due to pcv valve bad. Soon as i drove the car around their was oil leak passenger side all over left side around belts, alternator. I know the valve cover is sealed. Any one has dealt with this? It only leaked oil soon...
  17. Gen1 Diesel General Discussion
    Looking for specs for OEM Goodyear Fuel Max tires for my 14 diesel. Discovered Goodyear made 3 different versions of same tire, want to get as close to original tires as possible. Local chain tire store is clueless as to the difference, but have a really good sale going. Btw, amazingly I have...
  18. Gen1 1.4L Turbo
    Hi all, I have a quick question ?. I have searched the forums but I could not find any info on this !! Is it possible to replace the turbochargers coolant return pipe with out taking the whole turbo out i.e. Headers... Or can it be done with just removing the cartridge!!,... Any help would...
  19. Gen1 Appearance, Body, Detailing, & Interior
    My question is this: what position should the window be in when connecting the new regulator to it? I've replaced eight of these in the past on a Grand Prix. It didn't care about the position. Should I treat te Cruze the same? Or is there a preferred position?
1-19 of 81 Results
Top