Procedure: Removed spark plugs, remove ignition relay from position 7 and fuel pump control module fuse from position 67 in fuse box, released pressure in fuel rail, installed quick connect adapter into plug ports, crank engine for 15 seconds. cylinder 1 - 168 psi cylinder 2 - 170 psi...

TRIFECTA: Test results of Racer X LUJ/LUV intake manifold April, 2018 Introduction In 2017, Racer X Fabrication (Racer X Fabrication) brought to market an aftermarket intake manifold for the 1.4L Turbo MPFI engine (RPO: LUJ and LUV). They advertise it as being only compatible with the 2012+...

I've read on this and other cruze related forums that a workaround to the auto stop feature is to put it in L, hit the + button until it gets to L6, and then drive it as normal. What I tried to find searching and couldn't was if anybody actually measured the difference in MPG doing this. I saw...

Chasing a low power / rich running condition I did boost leak test with some odd results. First I noticed the a leak in the hose from the intake manifold to intake side (pcv). This should never see boost so I checked the pcv nipped and it was there but very dirty. Cleaned it and replaced the...

Just curious if anyone has run a warm air intake. Seeing as I have massive drops in instant mpg even fully warmed up during colder weather. Curious if having intake additional tubing run toward manifold to pull heat from there to bump temps would work. 15+ mpg swing in instant mpg on same route...

So BNR made an aggressive tune for me with the recent install of the ZZP downpipe/Forge BPV and it runs great. I went to open her up one day for the first time, a week after datalogging, and hit a wall at 112mph. The governor kicked in and the car nose dived...The info center said "speed limiter...

:question: 1. 2011 LT 1.4L Turbo Automatic 2. 84,000 3. NO DTCS Present 4. Cooling Fan 5. Cooling fan inoperative after A/C evac and recharge. System is at 1.38Lb but due to cooling fan inop, manifold pressures @ 75/275+ (and climbing) with A/C on. Fan motor is verified good with direct...

Hey guys, so it's been a couple of weeks since I did the headlight harness upgrade, and I must say, I'm pretty unhappy, I though for some reason it'd get better, but the headlights are a tad bit brighter, nothing significant like I thought might happen, so I'm probably gonna switch back to my...

So today was the day of my dyno run appointment at a local shop. This shop is 'known' for dealing with the Honda/Nissan compact car crowd but it was the nearest shop so I made the appointment. When I got there I was told that since my car was a diesel they would not be able to actually...

Hey guys/gals, I have a 14 LS 6MT which is rated at 25mpg in the city. Unfortuantly I haven't done any highway driving in the the last two and a half fill ups but I the good news (Or at least I think) I have been getting 33.9mpg according to the meter in my car. I have no mods as to performance...

Well, I can hardly believe that I have not had a long-ish road trip since January. But anyway, on Victoria Day, we did a 668 km round trip from Calgary, Alberta, to Edmonton, to see the Fort Edmonton historic park. (Well worth visiting if you are in the area.) The car carried two adults and two...

Well, despite my meticulous efforts to be careful, I managed to overfill my oil the last time I changed it. Sounds like an idiot move, right? Well, not exactly. I've changed the oil in my Cruze several times so far and never had that problem before. This time, i did it the same way i always...

Plasti Dipped and removed lettering on my 2015 Cruze. Included a how to and pics. This weekend, I went against my own intuition and took a spray can to my 2 week old Chevy. I wanted to turn the gold on the emblems black as well as remove the "Cruze"and "LT" lettering. I think it turned out...

I have had my Cruze Diesel for about 6 weeks, and finally had the opportunity to take it on a long highway trip. My wife and two of my grown daughters and I went back to my home town for a visit with my parents and siblings and many of my extended family. Then I went to visit some long-time...

Bought my Cruze Diesel about 3 months ago, recently drove to ATL from Cincy on one tank of gas (ave 45mpg), I was really impressed, after Atlanta I drove to Tampa where I put on a Propane "adder"... we enriched the air supply with 1.5 cfm of propane variably beginning at idle, mid and cruising...

Hello I am going to get my Cruze front end protected with 3M on Monday and wanted to see if anyone has had this done and has pics of how it turned out and an idea of what you had protected. Dealer, yourself or side installer? Thanks Lobster

Last weekend i had the pleasure of working with a friend and tuning guru, Mike Verdolotti. Mike is an electrical engineer and owner of Black Label Tuning. He has a long automotive resume (primarily GM), including his personal car which i believe is now the fastest LTx car in the US, and has...

I just wanted to share my results with everyone, it turned out way better than I though. Meguiar's: Gold Class Liquid Wax Leather and Vinyl Cleaner Ultimate Protection I love how deep the brown is, I didn't like it when I first got it but tolerated it...