Chevrolet Cruze Forums banner
retard
1-5 of 5 Results
  1. Gen1 1.4L Turbo
    Just started using torque a bit ago to watch my driving habits a bit closer. Don't think I have hit boost for 2 weeks now. Today had to ramp up a bit when pulling onto a 55mph stretch and at about 44mph it fell flat on its face knock sensor according to torque read out at 13! Idk what a lot of...
  2. Gen1 1.4L Turbo
    Hey guys, ive recently noticed the last week that after my car sits long enough to do a cat warm up cycle, my aeroforce gauge shows up to 1 degree of kr during cat warm up and about a couple minutes after then its gone. It does this on the trifecta tune and the factory tune. Anyone else had...
  3. Gen1 1.4L Turbo
    This is how much timing I've had to pull out of my car and it's still registering knock all the time when cruising or accelerating lightly. Tune is completely stock except for all the timing i've pulled out of the high octane table - I'm beginning to think it is false knock or an issue where...
  4. Gen1 1.4L Turbo
    Got this from Brian at VTuner. He REALLY knows his work! "The knock you are seeing is not real - GM has it programmed to register 1.9 degrees of knock retard at high rpm (over ~ 5000 rpm) and boost. I usually only take that out on our methanol/water tunes." So don't worry about it when you...
  5. Gen1 1.4L Turbo
    Hey guys, I have Torque set up with the custom GM PIDs and I have knock retard and knock sensor active counter set to log. When I log into the torque site, I'm not seeing either of those in the graphs, or the logs. Any ideas? (Sorry if this is the wrong place to post, seemed engine related...
1-5 of 5 Results
Top