Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 55 Results
  1. Lighting
    So I installed a pair of morimoto m led bi-led projectors in my 2013 LTZ RS and now the front turn signals do not work. Anyone run into this? Edit: added make and model
  2. Lighting
    2014 LT 1.4T After tons of researching CT and other sources I think I am ready to pull the trigger and get my next project going. Here is my list of things I am getting and also some items I need advise on. Bi-Xenon Morimoto Mini Stage III (D2S 4.0) Bixenon Projectors: D2S 4.0 (Round...
  3. Gen1 Appearance, Body, Detailing, & Interior
    Here is my 2014 that I just had retrofitted by Evolution AutoWerks. They have blacked out paint with the G5-EX projectors. I am using OEM Matsushita d2s ballasts Sent from my iPhone using Tapatalk
  4. Gen2 Audio & Electronics
    Welp I am going to order the parts tomorrow to retrofit this into my car. I found a used regulator / motor assembly that's still on a wrecked car. I will source the motor / regulator, window switch and door harness. I will get a few pics and post what challenges I ran into when fitting this...
  5. Gen2 Audio & Electronics
    I didn't know this was an option but stumbled across it on ebay. Instead of the rear USB outlet I would imagine the Premiers were the only ones that came with a 120v 150w AC outlet. I would much rather have the outlet in place of the usb plug so I picked this kit up off ebay. I pulled my...
  6. Gen1 Appearance, Body, Detailing, & Interior
    Has any one added the sunglass flipdown compartment on to a 1lt? Seems like pretty straight forward, but if any one has experience please share.
  7. Gen2 Appearance, Body, Detailing, & Interior
    I ordered the RIGHT (passenger side) REDline black chrome trim a while back. Haven't ordered the LEFT (drivers side) side trim yet but will this week. For reference RIGHT Trim Bezel W/ RS PKG, W/ WBL PACKAGE #84145379
  8. Gen2 Appearance, Body, Detailing, & Interior
    After lots of research and VIN cross-checking, I was finally able to order Liquid Palladium trim found on the LT Jet Black interior equipped Cruze models. I'm not alone when I state that the Piano Black, which GM calls "Japan Lock" by the way, stock interior trim around the radio and center...
  9. Gen1 Service Issues
    Hi all First post to the forum. My wife's car is a 2011 Cruze 1.4 Auto. Last night I did the Manifold Check valve kit by XtremeRevolution. I used every component and followed the directions/Photos perfectly. I also installed a new Valve cover with gasket due to a failed pcv valve and torqued it...
  10. Gen1 Appearance, Body, Detailing, & Interior
    Here is my Morimoto 3” FXR 3.0 retrofit done by Lightwerkz. They are done in TYC housings. The halos are switchback from Diode Dynamics on Orbit Shrouds. I am running the Osram CBI d2s bulb. Lightwerkz does great work and I highly recommend them to anybody. Sent from my iPhone using Tapatalk
  11. Buy/Sell Classifieds
    I'll be selling my Cruze in the next few months and am returning everything back to stock. I just pulled the retrofitted headlights out of the car and am looking to sell everything as a package. It will come with: both headlights, H13 Motocontrol wiring harness, capacitor link to correct the DRL...
  12. Lighting
    Hey guys, I've been searching for days for info on projector headlight questions and I haven't found exactly what I'm looking for. Sorry if I missed something in the search but here's my question. 2014 Cruze LT1 Stock Everything Non-Lease I want to upgrade my headlights to projectors but I...
  13. Buy/Sell Classifieds
    For sale a set of brand new set of retrofit headlights I do retrofit headlights and i decided to post this of the set i recently made . If you guys decide to get a set please inbox me with for more information . Asking $450 for just the headlights and $600 with a set of hid kit 5 years...
  14. Gen1 Appearance, Body, Detailing, & Interior
    Hi i just finished doing a set of retrofit headlights using eagle eye headlights. Here is a few pics I can do sets for anyone on this forum just inbox me for more information
  15. Lighting
    so now has come the time to start to either buy parts to do my retrofit on aftermarket headlight assemblys or buy a set already done On the aftermarket headlights is there a difference on brands im looking at two Eagle Eyes GM584 B111R Passenger Side Replacement Headlight for...
  16. Gen1 Appearance, Body, Detailing, & Interior
    Looking at retrofitting my headlights with projectors... Question I have is I've read heat gun and frustration and ultimately leading to just cutting the headlights open... Where is everyone cutting and what tool are they using? thanks in advance
  17. Gen1 Audio/Electrical Tutorials
    Hello everyone! If you are like me, you love your cruze and you love modifying it. I recently purchased a set of Spec D lights for my car; the ones with the LED swoosh. I hate the projectors on them! They are horrible! So I decided to retrofit them. Instead of taking the lights I originally...
  18. Gen1 Appearance, Body, Detailing, & Interior
    Finally got around to doing a retrofit on my Cruze, been wanting to do this forever. I am really pleased on how it came out and how easy it all went together. This isn't my first retrofit but is the first time I've installed projectors into reflector bowls. The hardest part was shaving down the...
  19. Gen1 Appearance, Body, Detailing, & Interior
    So I'm planing on doing a retrofit for my 2012 eco. Here in Canada by law we have to have drl so how would I go about doing that since the drl is the same bulb that I'm going to be replacing?
  20. Gen1 Diesel General Discussion
    I am thinking I want to do a retro fit but use the lamp and wiring and such from another oem projector this advisable? Has anyone done it? I don't need real expensive or bright headlights...I like the oem performance of a HID projector...
1-20 of 55 Results