Chevrolet Cruze Forums banner
rocker
1-17 of 17 Results
  1. Gen2 Appearance, Body, Detailing, & Interior
    Hi everyone, I'm new to the Cruze forum. I have a 2018 Cruze LS and have been searching for the small black plugs that seal up the lower rocker panel. It looks like something scraped the rocker and pulled the plug out. There are about 9 of these on the rocker panel that keep water/dirt/debris...
  2. Gen1 Appearance, Body, Detailing, & Interior
    Caught a corner of a pole during a too-tight turn. I've found two doors at salvage yards for $160 each and in perfect shape and I will be find with adding RS side skirts to cover it after i've pulled out the damage. anything else i should know about? edit: fixed picture
  3. Gen1 Appearance, Body, Detailing, & Interior
    So last winter I managed to run over a decent size ice chunk that formed at the end of my drive way. It folded my rocker panel / side skirt(unsure what it is called) in for about a foot and a half. I can get pictures up tomorrow when there is light. Any one know if some good places to find...
  4. Gen1 Appearance, Body, Detailing, & Interior
    Hi All, I have a 2012 Cruze LS with some rocker panel damage from being improperly jacked up by a mechanic. The rocker panels are slightly bent inwards. Anyways, I was wondering if it's possible to add the RS side skirts to my vehicle? From what I gathered online, it seems they fit over the...
  5. Gen1 Appearance, Body, Detailing, & Interior
    Anyone else have this issue? Looks like stone chips have literally eroded the paint over time and now the exposed metal is starting to rust. I think the previous owner drove on a lot of dirt roads. Sent from my iPhone using Tapatalk
  6. Gen1 Appearance, Body, Detailing, & Interior
    Do the cruzes come with rocker panel plugs from the factory? Mine has them and one is missing, wondering if anyone has a part number or knows where to get new ones.
  7. Gen1 Appearance, Body, Detailing, & Interior
    Today I was at the dealership and noticed that the 2016 spark and Malibu now feature a type of textured paint along the very edge of the rocker panels all the way to the pinch weld. It is for rock chip protection. I didn't get a chance to look at any 2016 model Cruze. I was wondering do they...
  8. Gen1 Appearance, Body, Detailing, & Interior
    Hi all. My right side rocker panel modling on my RS model came unattached from the car. I don't know if the clips broke or what not but the piece isn't attached entirely to the car now and there is a space in between the rocker panel and molding. What can I do to fix this? the body shop...
  9. Gen1 Appearance, Body, Detailing, & Interior
    Hi all my 2012 Cruze LT RS rocker molding clips came loose or broke on my passenger side. Body shop glued it back to the car but that only lasted about a day. It'll cost me 400 to replace it now. I'm wondering if it isn't flush with the car and there is a space between the molding and the rocker...
  10. Gen1 Appearance, Body, Detailing, & Interior
    My 2012 Cruze LT passenger side rocker molding came loose from a few clips. Im wondering if this will cause rusting behind it? Im going to have the body shop glue it back against the car on Friday but im just concerned. The molding is still on and everything but since a few clips broke there is...
  11. Cruze Parts
    I picked these up from the bodyshop just after they were finished being painted (Siren Red Tintcoat) but I sold my '15 Cruze a few days ago. My loss is your gain as these are brand new and never been installed obviously and I paid about $600 to buy them and have them painted. Price: $350...
  12. Gen1 Diesel General Discussion
    I'm looking to add the OEM fog lights to my 2015 CTD and the dealership is telling me that the 2015 foglight are unavailable as a stand alone accessory. Has anyone added them yet? Similar thing with the RS package rock panels, I've been told they won't work with a non-RS package car for a...
  13. General Discussion
    Took my cruze to the dealer for an electrical problem. While there the tech managed to drive it into a lift. They are telling me they can cut out the bad and put in a new section. What do you think. They say it will not be on the car fax. Thought that rocker panels were unibody frame parts...
  14. General Discussion
    So I am looking at buying my first cruze. I found a 2012 ECO with 69,xxx miles. I am trying to get it for ~$9500. The issue with it is the damage on the rocker from ice in the road this winter. My friend does body work and said it would be about ~1000.00 to replace the inner and outer rocker...
  15. General Discussion
    I just purchased a used 2012 Chevy cruze 2LT, 38,000 miles and it came with the rocker having a big dent along the passenger side. I live in colorado and have had it take to many body shops which have given me estimates of $675 or more. Is this a decent price to have this fixed or is it not...
  16. Gen1 Appearance, Body, Detailing, & Interior
    Hello to All, I recently went to a park and drove over a low spot causing my driver's side RS rocker molding to get pushed up. Now the molding will not sit snug against the vehicle rocker. There is a approximately 1/4" gap on the top of the molding where it is supposed to fit tight against the...
  17. Gen1 Appearance, Body, Detailing, & Interior
    Hi folks, I'm sorry if this is a repeat topic, but i coudn't find a link, but i just got my Cruze Eco, but what i really, really want is the rocker moldings like comes with the RS paskage. I bought my White ECO 6 M/T for the MPG's but I really wanted one w/the RS package. I've seen a few...
1-17 of 17 Results
Top