Chevrolet Cruze Forums banner
rotor
1-19 of 21 Results
  1. Gen2 Wheels, Tires, Brakes, & Suspension
    I decided to attempt my first ever pad & rotor replacement and have a whole new respect for people that do this day in and day out. Here are a few things I encountered. NOTE: I have a 2017 Cruze Premier w/ just under 30k miles. Also, I live in the Northeast where the roads become more salt than...
  2. Gen1 Wheels, Tires, Brakes, & Suspension
    Hello I'm new to CruzeTalk I own a 2015 Chevy Cruze LT2 RS. Recently I noticed a pulse from my brakes leading me to believe that my rotors are warped. My question is, when I go to look up new rotors on GM OEM parts websites it only gives me two options of a 15" Wheel or a 16" Wheel for what...
  3. Gen2 Wheels, Tires, Brakes, & Suspension
    Couldn't find this info in the specs... Do all trims, LS, LT and Premier share the same rotor size? Thanks!
  4. Gen1 Wheels, Tires, Brakes, & Suspension
    getting my powerstop rotors and pads(carbon-fiber/ceramic) installed tomorrow. it says to do 5 aggressive stops from 40-10 without coming to a complete stop then 5 moderate stops from 35-5 without coming to a complete stop than 5 minutes with easy driving for cooling. the mechanic doing the...
  5. General Discussion
    Doing the brakes for the first time on my 2014 chevy cruze 2LT. parts stores tell me there is a 276mm or a 300mm rotor. Now everything I've come across says I have the 276mm rotors, but then where do the 300mm rotors come in to play? Are those on the LTZ or RS Models? Figured I'd attach a...
  6. Gen1 Wheels, Tires, Brakes, & Suspension
    I have been noticing whenever I go out lately I hear this woshing noise coming from the back of the car when I apply the brakes. The front rotors are fine but the two rear rotors have uneven wear patterns on them (as seen in the pictures). I had the pads and rotors replaced less than two years...
  7. Gen1 Wheels, Tires, Brakes, & Suspension
    Just noticed some very abnormal and sudden front passenger side brake pad wear on '12 Eco. Both driver side pads still has maybe 8mm left but passenger side outside pad is almost gone (inside pad not too bad...see pics below). Only thing I've done recently was pressure bled the brakes using...
  8. Gen1 Wheels, Tires, Brakes, & Suspension
    Hi every one. I am from the Caribbean, Trinidad and Tobago. I'm seeking help on trying to determine the correct rotor size for my 1.6L Chevy Cruz LS 2015 model (South Korean made RHD). I have tried using the VIN as a means to quickly identify it, but the VIN allocated to vehicles manufactured...
  9. Gen1 Diesel Technical Discussion
    Hoping someone could give me the part #'s for a 2014 CTD Front and rear brake pads and front rotors? Thanks in advance!
  10. General Discussion
    I have asked about this on the facebook page with good advice however, i am hoping someone as experienced this. I replaced my original brakes and rotors. I used duralast gold rotors and their ceramic pads. I followed instructions and have changed them before on other vehicles with no problem. I...
  11. CruzeTalk New Member Introductions
    Hey guys, I am fairly new to posting here. Have been lurking for just a little bit. My GF owns a 2013 Chevy Cruze LS, has basically no features which sucks but it's a pretty reliable car. Heck I'd buy one turboed lol. For a while I have been wanting to do a few things to her car, her mom was...
  12. Gen1 Wheels, Tires, Brakes, & Suspension
    Hi, I recently started having issues with a pulsating brake pedal on my 2011 Chevy Cruze Eco MT (50,000 miles on it), so yesterday I decided to take a look at the pads and rotors. The rear pads and drums are in serviceable condition, only needed to be adjusted. However, the front pads and...
  13. Gen1 Wheels, Tires, Brakes, & Suspension
    Hey there, TheGreenDragon here from the SonicOwnersForum. I have a dumb question, and I tried a search and looking through over 30 pages and I can't find an answer. Is the hub/rotor from a Diesel Cruze with the 5x115 pcd a simple plug and play with the Gas Cruze? That is to say, if someone...
  14. Gen1 Wheels, Tires, Brakes, & Suspension
    I have the ZZP bbk. Pads are garbage, and I am on my 3rd set of rotors which are once again cracked in so many places I can't believe they still sell the pad/rotor setup. So, with that said... I already know the hawk HB249F.575 pads work with the big brake kit and that it's meant for the...
  15. Gen1 Diesel Technical Discussion
    Looking to replace my rotors, nothing special but I like the quality of Napa parts and when I go to look it up it comes with 2 sizes 300mm or 276mm diameter. They both say front rotor. Thank you!!
  16. Gen1 Wheels, Tires, Brakes, & Suspension
    My 100 mile/day commute has me going over some pretty good grades. Has anyone used a slotted/drilled/cryo rotor they care to endorse? I don't really want to put rotors on every year.
  17. Gen1 Wheels, Tires, Brakes, & Suspension
    So I bought a 2011 Cruze 2LT that is all black and I want to find all black rotors for the front and rear. Anyone know of some decent brands that will keep their black color? I had another brand I can't seem to remember on my old tC and the black wore off in a month so I'm trying to avoid that...
  18. Gen1 Wheels, Tires, Brakes, & Suspension
    Anybody change their front disk pads yet? when you did; did you have the rotors turned, buy new ones or just leave them status quo? I have been looking thru my wheels at my rotors and with 40 K on my car, contemplating pad replacement and what to do with the rotors: they look a little ? not...
  19. Gen1 Wheels, Tires, Brakes, & Suspension
    Hello, 2011 chevy cruze ltz. Replacing front brakes and rotors but the **** single screw on the face/front of each rotor seems impossible to get out. Any suggestions? Thanks guys. Sent from AutoGuide.com Free App
1-19 of 21 Results
Top