Chevrolet Cruze Forums banner
rotors
1-19 of 27 Results
  1. Gen1 Wheels, Tires, Brakes, & Suspension
    I just got my car back from chev and they told me I need new front and rear brakes... now I’m assuming that means rotors as well? If so is there a different rotor size for front and back and if so what are the sizes? I have a 2014 cruze 1.4 2lt RS
  2. Gen2 Wheels, Tires, Brakes, & Suspension
    Handbrake Applied & Released Repeatedly / spots on rotors / deep scoring on rotors The manual shift is very nice but another favorite things about Cruze is the manual handbrake! Q1: Assuming traction is sufficient so tires won't slip, and a bootleg turn is not the goal, is it OK or not OK...
  3. Gen1 Wheels, Tires, Brakes, & Suspension
    At 24k miles i had warped rotors and picked up a set of centric premium rotors. i am now at 37k miles and the rotors are warped! i don't ride the brakes and dont stop short, i am very confused as to how a set of rotors can be warped this quick. to have warped rotors after 13k miles is beyond me...
  4. Cruze Parts
    I just upgraded to the big brake setup I have rotors that are 60% pads are at 40% plus the other parts https://photos.app.goo.gl/BtPh1abcY1a4maMV2 In Albuquerque Free if you pick up Free if you pay shipping
  5. Gen1 Wheels, Tires, Brakes, & Suspension
    2014 1.8l LS Brakes are doing well at 71k. However I know they will need replacing soon. AutoZone has a ship to home deal and I can get rotors and metallic pads for dirt cheap now (links below). Also leaning to the semi since I'd rather change pads than rotors. Semi setup buy is ~$115 shipped...
  6. Gen1 Wheels, Tires, Brakes, & Suspension
    to start off i took a look around the forum(13 pages deep) and havnt found the info i needed so, i have just over 25k miles(1LT 6 speed M/T(not sure if that makes a difference) fully loaded) and my front rotors are warped and the pads have 5% life left in them, and the rear pads(drum brakes)...
  7. Gen1 Wheels, Tires, Brakes, & Suspension
    Hello, I am new to this forum! To start off, back in April of 2015 I had my brakes serviced. They put on new rear brake pads (I have four disc brakes). The car had about 30,000 miles on at that point. Fast forward to April of 2016 (a year later), I notice that when I am braking at slow speeds...
  8. Gen1 Wheels, Tires, Brakes, & Suspension
    I have the ZZP bbk. Pads are garbage, and I am on my 3rd set of rotors which are once again cracked in so many places I can't believe they still sell the pad/rotor setup. So, with that said... I already know the hawk HB249F.575 pads work with the big brake kit and that it's meant for the...
  9. General Discussion
    The front rotors on my 2012 chevy cruze are warped and I am planning to replace them with new ones. When I called the dealership to check the price on new rotors and brake pads they mentioned that they can machine the rotors. The price difference between getting new ones and machining them is...
  10. Gen1 Wheels, Tires, Brakes, & Suspension
    Hi I'm wondering if any of you could help me with the following problem. Whenever I would drive at around 80-100km/h the ABS light turns on for a short time and then disappears, after which the vehicle service light turns on and stays there. It only disappears once I turn my car off and turn it...
  11. Gen1 Brakes/Suspension Tutorials
    How-To: Replace Front Brake Pads & Rotors Overview: At some point in your Cruze ownership, your brake pads and rotors will need to be replaced. In my case, the rotors needed to be replaced before the pads due to uneven wear (note: rotors don't warp). This was the first job I did on the first...
  12. Gen1 Wheels, Tires, Brakes, & Suspension
    Hey guys, I'm getting a new set of tires put on this week and know I'm due for some maintenance on my brakes. If I wanted to upgrade from the factory pads etc, what would you recommend? I'm not feeling a big brake kit type of upgrade, just better pads and whatever else you can just bolt on...
  13. General Discussion
    Im doing brakes this weekend on both cars, 2011 Cruze RS and 2012 F-150. Cruze has 2 disc brakes, truck has 4. This will be the first brake job for both cars. Cruze has 60,000 miles and truck has 54,000 miles. I dont think im going to have to turn the rotors unless i see some serious damage on...
  14. Gen1 Wheels, Tires, Brakes, & Suspension
    What all do you have to do in order to change the bolt pattern of your hubs and rotors? What kind of shop would redrill the hubs and rotors? And is that all it takes to change the bolt pattern? Been using the search button and nothing has came up so dont tell me to search it, its why im asking...
  15. Gen1 Wheels, Tires, Brakes, & Suspension
    On a 13 Cruze, I'm trying to replace the front rotors, I removed the calliper and torx bolt on the rotor. Does anything else need to be removed to get the rotor off? Mine are stuck on pretty good
  16. Gen1 Wheels, Tires, Brakes, & Suspension
    I bought a couple of rotors and have been contemplating doing the job. I can get the caliper off, my biggest hold up is removing the 2 18 mm bolts holding the mounting bracket on. Is it best to do that before removing the caliper? The caliper seems to get in the way when trying to remove esp...
  17. Gen1 Wheels, Tires, Brakes, & Suspension
    I recently replaced my brake pads and now after having my rotors turned, am considering replacing. Just want to know anyone else have luck with only turning rotors. Mine were grooved I would say by dirt or something other than worn pads ad my pads were not worn all the way down. Since I had my...
  18. Gen1 Wheels, Tires, Brakes, & Suspension
    Anybody change their front disk pads yet? when you did; did you have the rotors turned, buy new ones or just leave them status quo? I have been looking thru my wheels at my rotors and with 40 K on my car, contemplating pad replacement and what to do with the rotors: they look a little ? not...
  19. Cruze Parts
    Got two sets on ebay ( I have 3 Cruze's...) and I only used one set. (dealership warrantied one of my cars with new factory brakes). Will part with my spare set for $130 picked up (north of Milwaukee WI) or SHIPPED Ebay rotors from R1Concepts. I've used them on several cars in the past and...
1-19 of 27 Results
Top