Chevrolet Cruze Forums banner
rpm
61-79 of 84 Results
  1. Gen1 1.4L Turbo
    So I'm driving along on the freeway yesterday. It's about 75*. I notice the car is just running like crap. No throttle response, no power, nothing. I get to a point where I notice that I'm losing speed and the tach is sitting at 3000 rpm. I adjust the pedal a bit but no change in RPM so I floor...
  2. Gen1 1.4L Turbo
    Hello all im pondering an issue that has sprung up in the last couple weeks. I am tuned and awaiting an answer from steven or vince on possible issues but im turning to my fellow cruze talk members to see if anyone has had similar issues. Ive been tuned for a month and first couple of weeks it...
  3. Gen1 1.4L Turbo
    Hello! Looking at this dyno graph from the GM powertrain website, it shows that there is a significant base-lining of HP @ 4900 RPM with no significant gains through the last 1000 RPM cycle. Engine redlines @ 6K RPM. Any particular reason for this flat lining on the graph and slight drop off?
  4. Gen1 1.8L
    Good day! Im new here... Im a Filipino currently rollin on 2013 1.8L Cruze LS m/t... just want to know...In 80KPH cruising on hi-way what's your:RPM = ?Gear = ?Cruze Model = ?Thanks in advance, this will help me diagnose if there's something wrong with my Cruze... more power to the group and God...
  5. Gen1 Powertrain
    Today I got a little carried away and shifted at about 5000 RPM and almost immediately I smelled a burning smell. I know that it is probably coming from the clutch, but I continued to drive and it shifted and drove fine. How serious is this? Should I be worried since it continued to drive fine...
  6. Gen1 1.4L Turbo
    Anyone else notice the car vibrates in this rpm band? I hooked up my vTuner to it and "sees misfires" at this range but no other ranges. I seriously doubt they are actually misfires based on my fuel economy being great and they don't show up anywhere else in the rpm band (My understanding is...
  7. General Discussion
    What is the best RPM to shift at WOT to get the most speed in the 1/4 mile ? The engine is the 1.4 with the automatic.
    rpm
  8. General Discussion
    Hi all, I have a brand new 2013 1LT. Everything is great so far, just one concern. I'm finding that when I'm accelerating, the noise from the engine is quite a lot louder at 2000 rpm than in any other situation. I guess if I had to describe it, it's a buzzing noise more than an engine noise. I...
  9. General Discussion
    Today, I recorded this video showing the RPM at approx. 160 km/h: RPM about 160 km/h in Cruze 2,0 VCDi AT. // 2013-01-04 10.04.15.mp4 - YouTube (Hope you can see it, it's first time I upload to youtube:) ... with reference to this thread...
  10. Gen1 Powertrain
    ok so iv'e looked around and iv'e noticed that everyone has noticed that there rpm's are a little different at idle so iv'e opened this thread to see what everyone is at when you start it should be like 1500 to warm itself for about 3 minutes then it should sit at 1000 rpm when my engine...
  11. Events, Meets, & Regional Discussion
    Haunted RPM is BACK! Location: 3440 Odyssey Court Naperville IL 60563 Car Show 5pm-10pm OFFICIAL FACEBOOK EVENT & RPM Facebook ~ HAUNTED RPM EVENT ~ RPM Official Facebook Page To register your car or motorcycle Register here There are 6 classes for motorcycles so you bike guys, here's...
  12. General Discussion
    All, I just bought my Cruze last July 2012, I just wonder what correct is RPM for speed 100km/h... my cruze just doing 500km in mileage and the RPM at 100km/h is 2200RPM. I have checked with other 2011 and 2010 model at 100km/h suppose to be 1700 to 1900RPM. RPM - rotation per minute.
  13. Gen1 Powertrain
    Hey guys I have an LTZ RS with the 1.4L turbo automatic transmission and I find when I am crusing around the 1800 ish rpm range power is not too strong I know this car was designed as a commuter and thats why I bought it but if anyone can tell me how to get more power out of her I would really...
  14. Gen1 Audio & Electronics
    Hi guys I am new here, new Cruze owner : ) very happy with my purchase, I had a 2008 Civic. I got the 2011 canadian Cruze LT without connectivity package. There is a lot of cluster for sale on ebay but the ones with the connectivity package 2012. My question is: Is it plug and play if I find a...
  15. Gen1 1.4L Turbo
    Just wanted to share some results I've been toying around with, 2012 LT Auto. 0-80 WOT Pull in Automatic Mode, Completely Stock. Fairly Level track, Relatively Cool morning air. FUEL: 89; 10% Eth. w/ detergent IAT = 57F AAT = 54F MAF = AVG 14 lbs/min. ECT = 217-220F Engine Warm. 0-60 ~ 8.8s...
  16. Gen1 Service Issues
    I have a 2012 Cruze LT auto- it has been to the dealer twice for the same issue and was wondering if anyone else has had the same problem or if GM has a documented fix for it. At acceleration around 3000 rpm a buzz noise comes from the console where the auto shifter is- I can put pressure on...
  17. Gen1 Powertrain
    So the wierdest thing has happened lately while I drove my wife's Cruze with 4 passengers in it. Maybe someone can help me out with understanding this or knows what's shaking the car so much. Basically while driving from a dead stop, and shifting to around 2100 RPM the entire car does like a...
  18. Gen1 Audio & Electronics
    Hi, I'm new to the forum and just purchased a 2011 Cruze LT Turbo several days ago. When I got my car, I noticed the DIC was in French and I have no idea how to change it to English. Also, I have no idea how to change the clock on the DIC panel that's above my radio (where it tells you the...
  19. General Discussion
    Everything i have read about the 1.4T says it has a 6,500 rpm redline yet the rev limiter on my car kicks in at 6,000 rpm. Anyone else noticed their redline is 6,000 rpm instead of the advertised 6,500 rpm?
61-79 of 84 Results
Top