Chevrolet Cruze Forums banner
rubbing
1-12 of 12 Results
  1. General Discussion
    I recently went from the stock 225/40/18 tire to a 225/45/18 tire on an 18 x 8 wheel with +40 offset that I was previously using. I wanted extra sidewalk and thought it wouldn’t be an issue but I’m rubbing the wheel well on my the front drivers side wheel near full lock but not the passenger...
  2. Gen2 Wheels, Tires, Brakes, & Suspension
    I recently went from the stock 225/40/18 tire to a 225/45/18 tire on an 18 x 8 wheel with +40 offset that I was previously using. I wanted extra sidewalk and thought it wouldn’t be an issue but I’m rubbing the wheel well on my he front drivers side wheel and the can’t accelerate at high speeds...
  3. General Discussion
    I have 2010 cruze petrol engine, I hear strange rubbing sound coming from the front when the moment the shift changes and the clutch starts to catch and pushing the gas pedal, this sound can be heard only the range of 1500-2000 rpm and only pushing the gas pedal... I took a video, you can hear...
  4. Gen1 Wheels, Tires, Brakes, & Suspension
    Hello Cruze Talk! At the end of the month I will be purchasing my very first set of rims & tires and I want them to come out PERFECT! You guys and gals know best so I figured I'd come here. *breakdown* - Hayaku Wheel (18" x 8) - Tire (225/45/18) or (235/45/18) - Eibach Springs If I go with...
  5. General Discussion
    This would happen at a dead stop or making u turns and such. Kind of like two wet inter tubes rubbing together. Of course when i brought it in it wasnt happening bc it happens on hotter days. But luckily i was smart and got a it video. It was some coil, i can get exact name off paper in car if...
  6. General Discussion
    2013 LT****Hello all. I have this squeaking rubbing sound when i turn. I hear it when parking or backing out or when making u turns and simotaneosuly feel vibration in gas pedal. Anyone know what this is? Is it anything seroius? Anyone else has this problem. Thanks guys
  7. Gen1 Wheels, Tires, Brakes, & Suspension
    **UPDATE** I solved the problem. I removed both wheels and had a good look at the rotors with a flash light. The top edges of the back rotor plates were awfully rusted... like disgustingly rusted. The rust was uneven, too. I rotated the wheel hub and filed off the major rust buildup around the...
  8. Gen1 Wheels, Tires, Brakes, & Suspension
    '12 Eco 6m. Going to go with a set of 235/50/17 conti pure contacts in the summer, also plan on throwing some eibach coils in. Does anyone have experience with this tire size and these springs? I know they'll rub, just a matter of how hard
  9. General Discussion
    So ive noticed since i bought the car a month ago,(About a week of that month its been in the shop..Belt, Tensioner and a Gasket around dip stick to step squeaking, also 3 recalls) Id say about 5-6 times now ive heard this scraping sound when turning at very low speeds like almost at idle. Its...
  10. Gen1 Service Issues
    I have a 2013 LT2 with RS Package. When you put the car in gear and drive 20-30 feet you hear this rubbing sound beneath the car then it stops. The only time it does it is when you take it out of park then drive. Has anyone had this happen or something similar?
  11. General Discussion
    My wife was going over some issues with our Cruze with our dealer, and one of the issues was that our Center console rubs pretty good on the Drivers seat. When trying to open it. The Car on the showroom floor's was nice and centered and 3 others we looked at were rubbing and barely rubbing...
  12. Gen1 Service Issues
    ok, had the car for almost 2 months now and have 2000 miles on it. I just got home from work and as i came to a stop to turn right onto my street, i heard the metal grinding/rubbing noise that my blazer used to make when the brakes were bad. I crawled "under" when i pulled in and the pads are...
1-12 of 12 Results
Top