Chevrolet Cruze Forums banner

shift

  1. Gen1 Powertrain
    hello everyone i have a 2015 cruze LS with the press fit style assembly and the shift knob like many others is a total POS i dont want to have to do some janky stuff and glue a new knob or anything like that so my question is has anyone ever or does anyone know if a MT shifter assembly from pre...
  2. Gen1 Powertrain
    Alright y'all, I know I know. Why would I do such a thing? I'll explain below. Ultimately I hope to get some kind of simple help DIY help here. If not, I'm ready to dish out some money to fix this issue. My 2016 Cruze overheated on my way to see family. My coolant was boiling, so I proceeded to...
  3. Gen1 Powertrain
    Hi all! This is my first post so please be gentle:) Apologies for mobile formatting! As the title suggests, I have a 2011 Cruze 1.4T 6sp manual, and hear some ‘clicking’ noises at different times. It’s a once off noise every time, and I can’t seem to figure out where it’s coming from. It...
  4. Gen1 1.4L Turbo
    I ask because I bought one last week, and it runs great and I overall love it, except that I found that at low revs (1800-2000) on inclines it sometimes jerks repeatedly and in rhythm. I thought it was the transmission shifting at first, but now I know how shifts feel and I don't think it's...
  5. Gen2 Powertrain
    I ask because I bought one last week, and it runs great and I overall love it, except that I found that at low revs (1800-2000) on inclines it sometimes jerks repeatedly and in rhythm. I thought it was the transmission shifting at first, but now I know how shifts feel and I don't think it's...
  6. Gen1 Powertrain
    Hi I have a 2014 Chevy Cruze that will not shift into reverse or even slide into 5tj or 6th gear What I mean by that it will not even let me go all the way right to have the option go up to 5th or even down to 6th please help thank you
  7. Gen1 Interior Tutorials
    This is not the only thread on this subject, but I wrote this to clarify some misinformation and my procedure was a bit different, so I hope you do not get upset with me for posting this. Robert Overview: This idea started one day when I read a Sonic Forum post about adding paddle shifters...
  8. Gen1 Service Issues
    I'm sure this has been covered but I don't know how to search this site. I need to change my Manual shift knob on my 2012 Cruze. YouTube has a few videos showing people just twisting the old one off, sometimes with the help of a pipe wrench. I used the pipe wrench to get it spinning but could...
  9. Gen2 Engine/Transmission Tutorials
    Installing the 4h short throw shifter First you want to swivel the aluminum block with three electrical clips out of your way. To unclip this, pull these two tabs to the outside and just lift up and out. Flip it over and to the drivers side out of the way. Now you need to remove the front...
  10. Gen1 Appearance, Body, Detailing, & Interior
    Hey everyone! Just picked up a 2016 Cruze LS manual transmission. And honestly I have never thought about changing the shift knob. But looking at these after market okay I kinda wanna do it. Is there any tips or tricks I can use to take it off? I tried turning counter clockwise and it didn’t...
  11. General Discussion
    Last month I got into my 2012 Cruze LT with 91,000 miles and for whatever reason it would not shift out of Park. Fortunately I was at home and not in any hurry. After fiddling with it for five minutes, I remember reading in the manual about this scenario, if you need to move the car...
  12. Gen1 Powertrain
    5 months ago my tcm board went bad & i had to change it but i kept the valve body and solenoids as well and i always have a delayed shifting on second and third gear until yesterday i went to the dealer and told me that i must change valve body and 3 solenoids but he didnt do anything with the...
  13. Gen2 Powertrain
    Spending a lot of time behind the wheel of this Cruze. Almost 13K miles in 7 months. Plenty of likes and dislikes. One of the dislikes is that enormous gear shift knob. I've done some Googles but can't find any suppliers. I get it that's it's not an easy swap due to the reverse engagement...
  14. Gen1 1.8L
    Does anyone know if the gearshift indicator lights up to show what gear your actually in or is it only displayed in the DIC? My shift indicator lights up on the center console but does not actually show what gear its in on the actual console indicator. Reason I ask is because I could have sworn...
  15. Gen2 Appearance, Body, Detailing, & Interior
    So had anyone found any aftermarket shift knobs for the manual 6 speed? Can't seem to find any with the trigger for reverse. Sent from my SM-G892A using Tapatalk
  16. Gen1 1.4L Turbo
    I've got a 2012 Eco that I did a clutch and fluid change(2.5qts) a few thousand miles ago while I was doing an engine swap from a bad head gasket. Right now everything seems to work fine except I can't shift into 4th gear. I checked the shifter cables under the hood and they seem to be freely...
  17. Gen1 Powertrain
    Hey All, I am wondering if anyone has procedures for adjusting the shift linkage system for a manual 2011 ECO. I can't get the car into 1st gear at random times, and eventually do get it in if I pop it into reverse and or second, and then slide into first. I suspect that the bushings maybe be...
  18. General Discussion
    I did the Google Custom Search and didn't see this listed. GM Lordstown Second Shift Ends Today | GM Authority https://www.ohio.com/akron/business/breaking-news-business/gm-to-end-second-shift-at-youngstown-ending-1500-jobs-as-cruze-sales-sink But on a brighter note,I saw this (and the Cruze...
  19. Gen1 Service Issues
    Just bought this - needed something... 2012 - 1FL model 210k Miles Had some check engine lights... Misfire Cylinder 1 (Fixed) MAP Sensor (Fixed) Turbo boost sensor (Just fixed - erased code - nothing back yet) Also replaced the Valve cover for the **** of it, as I've seen their prone to...
  20. Gen1 Powertrain
    my 2016 Gen 1 LT Cruze - has a hard shift (almost like a slip) every time it hits second and third for the first time. I have let the car warmup too - this is during the summer too. I have tried different driving styles too - if I am smooth and gental it still does it. If I hammer it and go...
Top