Chevrolet Cruze Forums banner
shifter
1-20 of 85 Results
  1. Gen2 Powertrain
    2018 RS Hatch 6MT Diesel approaching 30K. I seem to have developed a "clunk" in 1-2. I can feel it in the shifter and the floorboard with the clutch depressed. I hear it over the AC and with the windows up. When approaching a stop light and you were in a higher gear, clutch is in, and you...
  2. Cruze Parts
    Hi! I’m selling a new in box and plastic packing short shifter that was never installed. The box has been opened but the plastic sealed bag inside is intact. This model only fits 2011-2012 manuals! The Cruze is totaled and I’m back to focusing on motorcycles. Asking $100 plus $20 shipping...
  3. General Discussion
    Initially, I believe only the LT and Premier models were to have a auto stop disable switch. However the L and LS also has it. A great decision by Chevy. The auto stop is hated by most car owners.
  4. Cruze Parts
    For sale is a brand new, never installed 4H-TECH Short Shifter L-Shift for M32 transmissions, for model years 2013-2016. I bought this for my 2014 Cruze and never got the chance to install it before selling. I'm simply asking what I paid for it, $150 shipped. I know these are hard to find, as...
  5. Gen1 Powertrain
    Hi! I recently swapped out my 215K mile manual transmission due to the 5/6 cone bearing failure. I put in a 30K mile transmission. My shifter is now out of adjustment. Reverse is where 1st was and everything is pushed right. Is there a fix? TIA
  6. Gen2 Powertrain
    I order the BadNewsRacing Q2-shift short shifter for my 2017 Chevy Cruze 1.4 and was wondering if anyone had installed or order one yet and any feedback thanks
  7. Gen1 Powertrain
    Hello, has anyone else had this issue with the manual shift linkage breaking? I have a 2012 Chevy Cruze 1.8L 2LS 16V with just under 112K miles. Yesterday while driving downtown something broke with the shifter that prevented me from shifting out of first gear. Bungeed up the shifter under the...
  8. Gen1 1.4L Turbo
    Gents, DDM Short shifter showed up yesterday and I will be installing this weekend. Stand by for pictures and updates. My questions is.... Do you know why the ZZP or BNR cable clamps can not be used on the Cruze transmission. I can't tell what the difference is from my online research. Thanks...
  9. CruzeTalk New Member Introductions
    I want to change the shift knob on my 2017 MT cruze but how can i disable the button to put it into reverse
  10. Gen1 Powertrain
    Hi, new to the forum. I just replaced my flywheel using the Mt removal diy on here. After getting it back together, it starts and works from 1 to 4, but the shifter won't move to the right, and it's a little difficult to find reverse almost like something isn't lined up. Can someone give me some...
  11. Gen2 Audio & Electronics
    Hey guys and gals..i have question...so im buying the cruze hatchback in spring and im going to install the 5th gen camaro steering wheel with the paddles...I know that the first gen cruze and sonic can do this with rewiring and it works amazingly well..DOES anybody know if this would work...
  12. Gen2 Appearance, Body, Detailing, & Interior
    I have reviewed a few threads where this problem has not been resolved. I have tugged on it while turning it left/right and it does not budge at all. Trying to remove the console, which is impossible without getting the shifter plate off. Not entirely sure why it is so important for GM to make...
  13. Buy/Sell Classifieds
    Aluminum shifter knobs for sale for the manual transmission Gen1 Cruze. Threaded M10x1.25. Some Cruzes were threaded M10x1.25, some were press fit. If yours was threaded, this will be a direct replacement for the OEM shift knob. If yours was press fit, you'll need to use a tap & die set and...
  14. General Discussion
    Long story short, a valet didn't read directions and somehow moved the transmission from park to drive without having his seatbelt on...Can this cause damage to the gears? I don't know the valet managed to do what he did, but if anyone could provide some insight here, that'd be great.
  15. General Discussion
    Here's The Problem With Jeep's*Recalled Gear Shifter* spring loaded shifter what a stupid design. yeah that won't ever wear out. I thought Anton was a great chekov.
  16. Gen1 Service Issues
    2012 Chevy Cruze Eco 1.4T Manual 6-Speed 188,000Miles No Mods Hello, I am looking for guidance on what to check for the following symptoms. On a fresh start up my car's gear positions are just as they should be. I back out out of the driveway just fine, first gear and all initial upshifts...
  17. General Discussion
    Has anyone have problem shifter would not be in gear completely in 5th and 6th? Mine is 2012 1.8 MT Cruze Sent from my Nexus 5 using Tapatalk
  18. Cruze Parts
    For sale, a ddm works short shifter ($50 shipped in the US) works fine, just too crunchy of a shift for my daily driver. For the m32 tranny, mine is a 2012 but I think it's only for 2011 or 2012 models. Also for sale a cx racing intake tube with a k&n filter ($80 shipped in US), custom ordered...
  19. Gen1 Appearance, Body, Detailing, & Interior
    Hey Guys, I just wanted to show off some of the work I've done on my Cruze. I never liked the manual shift knob and for a long while I've been looking at ways to get something new. I wanted to keep a "Stock" look to it, almost as if it were an SS model "if there was such a thing" too bad there...
  20. Gen1 1.4L Turbo
    Hello all. I have a 2012 Chevy Cruze 1.4t with the m32 6mt. I was doing some routine check-ups on my cruze and noticed my shifter cables were kinda loose. Right where they snap onto the shifter assembly on the transmission. Is this how everyone's is? Or, are mine worn? I've noticed a little...
1-20 of 85 Results
Top