Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 24 Results
  1. Lighting
    So I installed a pair of morimoto m led bi-led projectors in my 2013 LTZ RS and now the front turn signals do not work. Anyone run into this? Edit: added make and model
  2. Lighting
    Where’d ya mount them front and back?
  3. Gen2 Audio & Electronics
    I've seen a lot of posts here about converting to LED lighting for headlights, interior lights, rear lights, etc., but nothing about converting the rear turn signals to amber LED. Does anyone know if this is possible with the OEM tail light housing? I like the design of the turn signals and...
  4. Gen I
    Here I have a brand new pair of Arctic white Cruze 2012 mirror housings with the LED turn signals built in I bought them for my 2012 and then sold the car I paid 110$ for them, feel free to make me a reasonable offer Feel free to call or text 818 641 5289, my name is Avner
  5. Cruze Parts
    Hello, I have a set of new white 2012 Chevrolet Cruze aftermarket rear view mirrors with turn signal LEDs I bought them to upgrade my Cruze and then sold the Cruze Feel free to make me an offer, I paid 110$ for them
  6. Gen1 Audio, Electronics & Electrical
    Hi guys, Driving home today my turn signals (which are fully functional front and back) stopped clicking when engaged. Any thoughts, figure it is probably a setting of some sort? Thanks, in advance! Joe
  7. Gen1 Service Issues
    Hello again Everyone, Back in June I was having some issues with my Cruze. Had codes for a vacuum leak, and lean bank codes, etc. Basically, I ended up replacing the cam cover/PCV valve. I did not replace the intake manifold at this time as I figured I'd try to just get away with the cheaper...
  8. Gen1 Service Issues
    So my wife just called me as she is leaving work and something has managed to entirely **** itself up on the car. This morning as she went through one of the roundabouts on the way to work (so not right when she started the car), all of a sudden the Airbag light and Traction control lights both...
  9. Gen1 Appearance, Body, Detailing, & Interior
    Hey guys, Putting led threw out the car and just got these turn signal led butnfor some reason they dont work in my 2015 cruze...but they work fine in my buddys jeep any idea why they would work? Tryed all 4 in the front signals nothing. Thx cerb...
  10. Gen1 Appearance, Body, Detailing, & Interior
    Easy project, but you do have to drill a hole in your fenders. Works with the turns only, I also modified the rear trunk mounted lights to also function as brake lights also. Never satisfied with the ordinary I guess. Always seem to modify or change-up stuff, from hotrods to choppers.
  11. Gen1 Appearance, Body, Detailing, & Interior
    What's up Cruzetalk, I posted on here like a week ago showing I installed my LED tail light bulbs and liked the sleek look so much I had to start looking to do the headlights. Well I settled for the LED Switchbacks on eBay for $15.37 which I didn't think was a very bad price but...only...
  12. Gen1 Appearance, Body, Detailing, & Interior
    So I just upgraded my front headlights with Winjet Projector headlights. The turn signals are LED and when I turn on the turn signal it blinks normally at first, but then blinks very fast like there is a blown bulb and then the car tells me to check the front right/left turn signal. Any one now...
  13. General Discussion
    Okay, I was working on installing my LEDs from Diode tonight, and got to the turn signals and ran into an issue.... Everything appears to be just fine with the lights, but for some reason, when I go to put the light in, when it's first touching (not even inserted) it will work just fine, but...
  14. Lighting
    I need help. I have retrofitted headlight with led for the turn signals. I wired resistors to the turn signals to avoid hyperflash. Now all of a sudden the left turn signal does not recognize the resistor and still hyperflashes. They are both wired up exactly the same. I have replaced the...
  15. Gen1 Appearance, Body, Detailing, & Interior
    Hi there I don't really care for the side mirror turn signals. I prefer the euro car type, in the fender. Has anyone every installed these? I'd just like them to be on when my parking/headlights are on, and obviously to blink with the signal. I found a few sleek BMW side markers that may work...
  16. Gen1 Service Issues
    im working on a 2011 chevy cruze for my buddy that owns a used car lot, he bought the car from a auction. it was a flood damaged car, i know stay away from those kind of cars. but i kinda got suckered into working on it and its up to me to get it fixed. ive done some reading on the forum to try...
  17. Gen1 Audio, Electronics & Electrical
    ok, where do i begin, i bought these Eagle eye headlights off ebay and they look great! never seen them, i know im the only one in my city with them, awesome!!! but i have reason to believe they are the reason behind all my problems im having with the car.. i got them roughly 2 and a half...
  18. Gen1 Appearance, Body, Detailing, & Interior
    Retrofitted my headlights with a Morimoto Mini H1 projector, xbaLED Halo Rings, and 2-way led turn signal kits The aftermarket headlights from for about $180 were the first items to arrive I baked the headlights in the oven and separated the housing and removed the reflector...
  19. Lighting
    I am trying to find out how to wire up these loan resistors I bought, I know the black wires go together but not sure which of the two wires coming from the plug go to the positive side of the resistors? Please help!!
  20. Lighting
    Which wires are LED load resistors supposed to connect to? There are (3) going to each turn signal socket.
1-20 of 24 Results