Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 23 Results
  1. Cruze Parts
    Used spacers, nothing wrong, went with different width. $38 shipped
  2. Gen2 Wheels, Tires, Brakes, & Suspension
    Hey, I'm looking to buy some rims and the ones I was looking at need wheel spacers cause they have a different wheel pattern. They are a 5X100 and of course we have 5x105. I have a 2016 Gen2 Cruze Silver. My question is that I was looking at some spacers that are an inch long, is that too long...
  3. Gen1 Diesel General Discussion
    Do you guys know of any wheel spacers made specifically for the the CTD? I know the lug pattern is different (5x115) but I would also prefer them to be hubcentric.
  4. Gen2 Powertrain
    NEW PRODUCT RELEASE: BNR Gen2 Cruze LE2 Throttle Body Spacer! Easily add a boost gauge, methanol injection, nitrous- anything that works with 1/8in NPT fittings to your 2nd Gen Cruze with BNR's LE2 Throttle Body Spacer. All installation hardware/gasket and 2 1/8in NPT plugs are included, install...
  5. General Discussion
    going to install spacers on my cruze hatchback dumb question, just wondering how I should measure what thickness the spacer should be (going for a flush look) from how I measured (tire to wheel well) I measured 15mm for front and 25mm for rear in order for wheels to be flush with body. any...
  6. Cruze Parts
    Set of 4 motorsport tech wheel spacers, 15mm thick, 5 on 105 bolt pattern, 56.59 hub centric both sides. These are $65 ea new. 6 months old $170 + ship. email for photos [email protected] or see them on the gama facebook page.
  7. Gen1 Wheels, Tires, Brakes, & Suspension
    I wanna add spacers to mu 2012 Cruze LT. i wanna give it a flushed look. What do you guys recomend?
  8. Gen1 Wheels, Tires, Brakes, & Suspension
    Looking to get more of a flush fit on my 2015 Stock LTZ wheels. I know I can get a smaller spacer, but I don't want to cut my studs. Oh' yeah it's stock ride height also.
  9. Cruze Parts
    Looking for 25mm spacers for 5x105, no adapters. Located in Mason, Michigan. Will pay for shipping if right price. PM me.
  10. Gen1 Wheels, Tires, Brakes, & Suspension
    Wassup guys, its been awhile since i've been on here and after searching the forums I haven't really found a clear answer.I just put on my new wheels (Niche Veronas) which are 19x8.5 with a 40 offset.The rear is real close to flush (what i'm going for),maybe a few mm and It'll be perfect.The...
  11. Gen1 Wheels, Tires, Brakes, & Suspension
    I have 2015 Chevy Cruze LS which I want to change wheels from 16" to 18". Here in Kenya, PCD 5x105 wheels are not available and would be expensive to import at almost US$ 2,500 for both wheels and tyres. I am considering fitting PCD 5x100 or 5x114.3 with adapters. Is it advisable to install...
  12. Cruze Owner Projects
    I wanted to have my wheels a little more close to flush with the fenders and I wanted to get eibach lowering springs. I want enough space to where I don't rub and so I don't have to roll the fenders. Any ideas of what kind I should get, what size and other things I would need? I have the 2014...
  13. Gen1 Wheels, Tires, Brakes, & Suspension
    First: Are our wheels 5x114.3? What's the bore? I found some of these: But they're for a 5x114.3 bolt pattern, and the "bore" is 64.1.... And hey, while I'm at it, I might throw some ARP studs on my wheels. If...
  14. Gen1 Wheels, Tires, Brakes, & Suspension
    I was in Auto Zone a couple of days ago and I noticed they sold wheel spacers similar to this I assume they are garbage but am looking for more opinions.
  15. Gen1 1.8L
    Do they have these for the Cruze yet? Any other way to get a nice whistle without drilling holes in my Injen intake or something stupid like that? inb4 trade for a turbo
  16. Gen1 Wheels, Tires, Brakes, & Suspension
    Ever since I've gotten my m537s I've always been annoyed since I've been just shy of flush, and I wanted the flush look. So, last week I called DDMWorks up due to an order problem, and was able to get a set ordered and shipped to my house. Yesterday was the moment of truth and after the install...
  17. Gen1 Wheels, Tires, Brakes, & Suspension
    Every other day i check many brand for new Cruze stuff and now, H&R offers TRAK+ spacers for the Cruze ! 2012 Chevrolet Cruze LT Applications || H&R Special Springs, LP For sure i'll buy some in the futur. :eusa_clap:
  18. Gen1 Appearance, Body, Detailing, & Interior
    Im looking at getting MOMO's Sentry Rims The specs for these rims are: 18" x 8", +40 Offset, 5x114.3 Bolt Pattern, 73mm Hub My Question is What spacers/adaptors do i need to make these fit? I know custom ones will probably have to be made. Ive heard of from other...
  19. Gen1 Wheels, Tires, Brakes, & Suspension
    So i recently purchased some 13mm wheel sspacers and Im having trouble finding somewhere that sells extended studs for my Cruze. Does any know where I can get some? Or does anyone know the specs of the stock studs?
  20. Gen1 Wheels, Tires, Brakes, & Suspension
    which Spacer fitted well with 16' rim 20mm or 15mm, Bolt Pattern 5x105 / Hub Center 56.5 from eibach??? best regards,
1-20 of 23 Results