Does anyone perhaps have measurements on the internals, specifically the rods and pistons on the euro spec 2.0 VCDI cruze. I'm trying to find sizes and specs but I'm having a hard time finding anything.
Does anyone know the torque specifications for the four bolts holding down the front seats and the three nuts for the rear seats?
I also need a part number for the blaack plastic post seats for the headrests. That would be the long deformed thing in the picture.
Hey all, I'm about to replace the serpentine belt on my wife's car, but need more info on the motor mount bolts.
1. Are these torque to yield bolts?
2. What are the torque specifications for both the MM bracket to vehicle (3x) and MM to engine bolts (3x)?
I've searched around and couldn't find...
I have a 2017 Cruze Hatch Lt and i am trying to find the engine bolt specifications for rebuilding the pistons and rods. Can anyone help with this? My Cruze has a cracked piston in Cylinder one at 15K miles and im not wanting to pay the dealership the $3500 they are wanting to fix the problem...
does anyone here know the dimensions of a compressor wheel on a 2018 Cruze 1.4T?
Was wondering if this will fit or if it's bigger? https://www.dieselsite.com/wickedwheel6.5L-2.aspx
Basically I would like to install a larger compressor wheel in the stock turbo.
Like I did for my...
I will be changing my oil soon and since it is the first change, I want to do it from the bottom side. Does anyone know the oil drain plug tightening torque specifications for the 1.6L? And the specs for the oil filter cap?
Thanks ahead of time!
I've been trying to soak up as much Cruze info as I can while I wait on the diesels to show up and ran across this article: 2016 Chevrolet Cruze Manual First Drive – Review – Car and Driver
While that's definitely not a glowing review, I'll go for the manual anyway because I want the higher...
I will be looking into pulling the head on my LUJ for a low compression issue on one of the cylinders. I figured since I had it off, I would do some porting/cleanup and install stronger springs.
I was curious if anyone knew the specs for the cams in the LUJ and is it the same as...
Does anyone have a confirmed wheel lug nut torque specs? I can't find it anywhere in my manual and I've heard it's 90 whereas others have said 100 (from trying to find the specs online). Right now mine are torque'd at 100lbs. Steel rims btw.
Thanks and sorry if this is in the wrong section.
Would this oil be suitable for use in our cars. It is not Dexos 2 or acea 3 spec but all other information seems like it would be a usable product
8012 Advanced European Performance Heavy-Duty
Diesel Engine Oil 5W-30Ultra high performance (UHPD), low ash, heavy-duty diesel engine oil for...
Hey, looking for any info on the turbo specs for the 1.4 turbo. I know it a Garrett and the number is MGT1446MZGL.
But im looking for trim specs and inducer and exducer specs, anything. I have looked and looked and cant find anything. Just seeing if there is a different option in replacing with...
I have a '14 LTZ RS and the Pioneer system is pretty decent for stock unit, I heard they are using BOSE now in the new vehicles and just wondering if anyone has any info on number of speakers or wattage ??
sorry if it came out of the topic. 2017 chevrolet tahoe whether the machine will be better than 2016 machines chevrolet colorado? I read some reviews of the blogs are strewn about the car's engine and tahoe colorado has a big difference, what do you think?