Chevrolet Cruze Forums banner
splash
1-20 of 37 Results
  1. Gen2 Diesel General Discussion
    Hey, had my car in for an oil spray and they removed some of the underbody pieces. I'm not sure if they've put them all back on. Specifically in front of the front tires and the bumper. Right now I have nothing there and I'm not sure if it's supposed to be like that. Can someone snap a quick...
  2. Gen1 Appearance, Body, Detailing, & Interior
    Hi All! Was doing an oil change on my 13' cruze LT today and realized that there really isnt a splash shield covering the front/center part of the engine. Is there a part for this? From googling certain phases I stumbled across these two... are either of them correct...
  3. Gen1 Appearance, Body, Detailing, & Interior
    Want better fuel economy, a cleaner engine bay, reduced road noise, and better highway stability? This thread is for you! Back in 2011 and 2012, the Cruze and the Verano both used the same engine shield. It was a great design. Then, the NHTSA started investigating engine fires. Apparently...
  4. Gen2 Appearance, Body, Detailing, & Interior
    So, I ordered my GM splash guards not realizing that they were not made to fit RS cars. So rather than send them back I decided to figure out what needed to be done to make them fit my car (2016 LT RS). After doing some minor alteration, I now have them on my car. Basically you need to cut out...
  5. Cruze Owner Projects
    Does anyone have suggestions on where to find splash gaurds that will fit an rs model?
  6. Cruze Parts
    For sale, New OEM Splash guards for Chevy Cruze. I bought these for my wife's car, but never installed. The OEM gauds go on ebay for around $40. I am selling for 20 shipped.
  7. Gen2 Appearance, Body, Detailing, & Interior
    I ordered the GM OEM splash guards / mud flaps for my 2016 Cruze Premium RS and there seems to be a problem with installing the front splash guards. (They just do not fit) When I ordered the splash guards I provided my VIN to verify fit. I have done some Google searches and from what I have...
  8. Gen1 Appearance, Body, Detailing, & Interior
    Where do I buy the plastic splash shield for a 2012 cruze? GM cut a big ass hole in mine when they did the recall and ever since then my shield started falling off piece by piece and now there's no plastic left from the back of the engine all the way up to my fog lights. It's causing my car to...
  9. Gen1 Appearance, Body, Detailing, & Interior
    I've read through quite a few threads and most have links that don't work anymore or lead to products that no longer exist. I am looking at getting these splash guards for my 2014 Cruze Diesel: http://www.amazon.ca/gp/product/B00HGAJBIO/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A2D9L39QUE9EAD...
  10. Gen1 Appearance, Body, Detailing, & Interior
    I don't think the Diesel model makes a difference here as I'm sure the body is the same, but just thought I'd specify. I'm considering splash guards for the vehicle and am undecided. I live in Canada where we unfortunately have salt on the roads in the winter. I am wondering (especially about...
  11. Gen1 Wheels, Tires, Brakes, & Suspension
    **UPDATE** I solved the problem. I removed both wheels and had a good look at the rotors with a flash light. The top edges of the back rotor plates were awfully rusted... like disgustingly rusted. The rust was uneven, too. I rotated the wheel hub and filed off the major rust buildup around the...
  12. Gen1 Appearance, Body, Detailing, & Interior
    Hello, So I bought some Chinese splash guards. The front lines up perfect with the plastic rivet. Unfortunately, the plastic rivet is not long enough. Does anyone know where I can get one size larger rivet or other alternatives to installing these splash guards? Also willing to take a splash...
  13. Gen1 Appearance, Body, Detailing, & Interior
    I was wondering if anyone could explain/show how to install the Rally Armor universal splash guards on an RS package. The fronts look pretty simple, but how do I overcome the .5-1" gap between the end of the rear panel and the inner fender well? I've looked all over the forums and I can't seem...
  14. Gen1 Appearance, Body, Detailing, & Interior
    Hello, I recently purchased the OEM splashguards for my 2014 Cruze. Part #95489815. The instructions for the front guards was included. But there were no instructions for the rear guards. (I think the eBay vendor simply forgot them.) Can someone scan a copy and help me out? Thanks
  15. Cruze Parts
    Hello folks; I am searching for an OEM uncut undercarriage / engine splash shield for my Cruze. Please call or text me at: 203-500-8777 Thank you. Edward
  16. General Discussion
    So im wondering if anyone has ever tried this, I really like the factory cruze splash guards. But unfortunately they have yet to release a version that fits the RS package due to the side skirts taking up the space the guards would go. Has anyone tried finding a longer version of the black...
  17. Gen1 Diesel General Discussion
    hi folks ive got a 2010 2.0 diesel uk spec and theres water going up below the rear seat inside the car on the drivers side rhd when i lifted the rear seat you can see through where the plastic clip is to the ground what i want to know is there meant to be a splash panel im going to be doing the...
  18. Gen1 Appearance, Body, Detailing, & Interior
    I am going to put installing rally armor spalsh guards on my wifes 2013 LTZ/RS this week/weekend and am wondering if anyone would like a write-up on the process.
  19. Gen1 Appearance, Body, Detailing, & Interior
    It stayed attached to the car at least. Hit something on the highway, didn't even feel it.
  20. Gen1 Appearance, Body, Detailing, & Interior
    installed these two guys a couple days ago. both are great additions imo. the moonroof is much more enjoyable to have open now with wind noise being drasticly cut down. im going to put tire black on the splash gurads when i do the tires after its washed. im guessing that will shine them up a...
1-20 of 37 Results
Top