Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

21-40 of 106 Results
  1. Gen1 1.4L Turbo
    I have been seeing a lot of posts about the different intakes available for the 1.4L engine. I have had 4/6 installed on my car and feel I have enough experience with these to post a review thread. If I miss anything please let me know and I'll update the reviews as needed. This is all opinion...
  2. Gen1 1.4L Turbo
    So recently I've been trying to find a way to convert my K&N "Cold Air Filter System" aka Short Ram Intake (In the engine bay), to an actual CAI system. The MAF sensor / IAT sensor needs to stay near the filter so I will be relocating the whole K&N system into the wheel well. Under where the old...
  3. General Discussion
    Hey guys, so I've been reading up on this, and need some insight. I love in a very hot area of the country, Texas, triple digit weather, and I've noticed some performance issue during the day, lagging and whatnot, but at night, so problem. So I wanted to ask, I have a k&n short ram intake, and I...
  4. Buy/Sell Classifieds
    I have sale the k&n filter that comes with the k&n intake. This was used for only about a week. I'm thinking $25 + shipping to the lower 48 states. PM if interested.
  5. Gen1 1.4L Turbo
    I thought I read on here somewhere that clearing the MAP after installing an SRI will let the MAP adjust to the new air levels. Is this not the case? I threw an SRI on last night and cleared the map and it bogs down pretty bad under medium to heavy gas pedal. Like when trying to merge onto the...
  6. General Discussion
    Hello, I've just purchased a new 2014 Holden SRI hatch (manual) and I was wondering if anyone has heard of any known issues with them I should keep my eye out for? Also a friend mentioned that you need to 'run in' a car if bought new, is this correct for the Cruze and how does one 'run in' a...
  7. Gen1 1.4L Turbo
    Question for those running the Injen SRI. Injen's instructions say that it shouldn't be run as an SRI unless it's winter. I also read someone else saying they have had issuess. For those running the Injen as an SRI, any issues I should be aware of? Thank you!
  8. General Discussion
    Question: Why when installing this intake do you have to remove the negative cable from the battery? The only electrical connection is the MAF sensor which should have no power to it with the key off. I assume that this is strictly only for safety purposes of any kind...? Seems to me it is not...
  9. Gen1 1.6L & 1.6L Turbo
    This may be applicable only to australia, im not sure if other areas have the 1.6ltr turbo petrol option, but im interested to know if anyone else out there has one and if they have done any tuning on it yet ? I've been playing with mine now for a few weeks with HP Tuners and the gains are...
  10. Gen1 1.8L
    Well guys I made a SRI using my stock air box I cut the stock m.a.s.f (mass air flow sensor) housing outdid some trimming and it works like a charm I will post pics as soon as I can. After it warms up a little here in Wisconsin I will make it look a lot better
  11. Gen1 1.4L Turbo
    The INJEN EA synthetic nanofiber (made by AMSOIL) dry replacement/upgrade filter for the K&N (1.4L) Cruze "Typhoon" SRI intake has been confirmed to fit perfectly without rubbing. Maintenance: Vacuum/compressed air dusting every 25,000 miles, 100,000 miles total service life. Benefits...
  12. Gen1 1.4L Turbo
    HEy all I recently installed my new intake and I have pics on the last page of my build log so please look there http://www.cruzetalk.com/forum/94-cruze-owner-projects/29849-nike12000s-build-log-6.html Anywho the intake is mounted I think firmly but from like 1200-2k rpm it rattles on what I...
  13. Gen I
    For Sale! CX Racing SRI! I am selling it for $70 and shipped. I bought them 1 month ago for $100. I have no problems with this SRI and don't pop up CEL code at all. It's about 500 miles on it. Has some scratch but it's underneath SRI. You won't be able to see it when You put them on. PM Me!
  14. Gen1 1.4L Turbo
    Hey all, Just a quick question with regards to the K&N SRI and the quickly approaching winter season... Should I have any concerns with regards to the change in climate and snow when it comes to the intake? Is there reason to revert back to stock? Thanks.
  15. Gen I
    I am willing to pay $120 shipped. I can make the payment immediately through paypal. Thanks, Tanner
  16. Gen1 1.4L Turbo
    So after the discussion XtremeRevolution brought up regarding the MAF sensor and getting a proper reading, I decided to play around with the screen before installing my recently purchased Injen intake. I went to the local hardware store, and asked what window screens they had, and I chose these...
  17. Gen I
    This is in Like New Condition, was only on my car for around 2 months. I have all hardware, parts, instructions and even the stickers. Ready to ship for $165
  18. Gen1 1.4L Turbo
    I know this is supposed to be a bad cat, O2 sensor or bad wire, Do they mean bad O2 sensor wire? Strange. I did everything carefully. I have done this plenty of times before.. 700 miles on car. Car isn't tuned yet but will be this week. Only 200 miles on the zzp pipes. Should I put the thing on...
  19. General Discussion
    Hey everyone, Some of the Holden dealerships here in Western Australia like to do up their demo cars and the new 1.6T Cruze is no exception. Check this one out: In case you're wondering: yes this is a factory paint job. It's called "Fantale Orange." The Spoiler is also a factory option...
  20. Gen1 1.4L Turbo
    Sent from AutoGuide.com Free App Hey guys, the other night while messing around in town with Torque on i've noticed how hot the intake air temp was..it was 17 c. Outside and when I was at a red light or going slow the intake temp was getting up to 55c. ..go figure how hot it comes in a 35c mid...
21-40 of 106 Results
Top