Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 47 Results
  1. Gen I
    This is a used ultra racing front upper strut tower. Brace. Works just fine obviously because it's just a stiff piece of metal. I had it plasty dipped before but I pulled all the plasti dip off of. It. Needs to be cleaned a little bit better than that. It's in perfect condition. There shouldn't...
    $140 USD
  2. Gen2 Service Issues
    Greetings Guys! Tell me if anyone knows? Do you need to remove the shock absorber and the spring to replace the shock absorber boot, or is it enough to unscrew the nut from above and pull the stem down and push the boot? Or maybe someone came across a video of how to change the shock absorber...
  3. Gen2 Service Issues
    Hi guys ! Look in what condition your shock absorber strut anthers are in front .. I have a 2017 hatch, they are just full of holes, who has already changed them? why 3 years and they are dead? and because of it the shock absorber is in danger, look what you have going on there!
  4. Gen2 Wheels, Tires, Brakes, & Suspension
    Does anyone have a diagram/manual or jsut simply directions on how to remove the plastic cowl on a 18 Hatchback. I am needing to access the top strut bolt to remove the strut to finish swaping out the front OEM springs to the Ebiach springs.
  5. Gen2 Wheels, Tires, Brakes, & Suspension
    i start this with i tried to use the search but was taking my text The Ultra Racing States 1.4t which is same motor as Gen 2 but will it fit? "Chevy Cruze 1.4L Ultra Racing Front Strut Bar Steel Tower Brace" once again i tried to search :(
  6. Cruze Parts
    Looking for a gen 1 strut tower brace Sent from my SM-S727VL using Tapatalk
  7. General Discussion
    Had my coilovers installed and there is metal to metal noises coming from front right corner. I noticed there’s a pretty decent gap between the top strut plate and frame of the car. I got a strut bar to hopefully fill the gap and make everything secure but there still movement and the strut bar...
  8. Gen1 Brakes/Suspension Tutorials
    You will only need a couple tools for this. You will need the strut bar if course. I believe BNR has it. Should take 10 to 30 minutes to install depending on how fast you go with these tools. It's awkward at times when putting the nuts to torque. You will need a lb/ft torque wrench, a 7mm Allen...
  9. Gen1 Wheels, Tires, Brakes, & Suspension
    Does anyone have photos of the front strut mount plates for an LT or equivalent? I want start my strut replacement and my friend, a Chevy Mechanic, says the plates are wrong. I need to contact the place I mail ordered them from post haste. Thanks in advance These are the plates I purchased.
  10. Gen1 Wheels, Tires, Brakes, & Suspension
    I need some help, the top of the strut is stripped out. When I pulled cover off of the strut, I found the hex head filled with rust, I used a a wire wheel to clean it out, but now I can't remove the strut. I don't want to cut it out, it is a Bilstein coil-over and these things are not...
  11. Cruze Owner Projects
    Hey guys. My project isn't as involved as some of the others, but I thought I'd share it. I have a small welding and fab operation and have built this strut bar. I built it because I have winding roads when traveling to my mother's house, and love seeing how fast I can take the turns (safely...
  12. Gen1 Wheels, Tires, Brakes, & Suspension
    Anyone know where to get a front strut mount stabilizer bar ? Sent from my iPhone using Tapatalk
  13. Gen1 Wheels, Tires, Brakes, & Suspension
    Can't seem to find one that fully verifies that it will fit the 2013.. Are the 13s the same as the 11 when it comes to the engine bay strut towers ? Sent from my XT1254 using Tapatalk
  14. Gen1 Wheels, Tires, Brakes, & Suspension
    What's up fellow Cruzers, I need some advice on some front and rear strut bars. I have a 2014 2lt auto STOCK, and came upon bad news racing from a fellow member. My question is, are these worth the price and effort? and If I do install these, is there anything I need to replace or also install...
  15. Cruze Parts
    The ultra racing bar is kind of ridiculous since it's coming from Malaysia or whatever. Let me know if you have a front STB or Fog lights for sale. Non-RS.
  16. Buy/Sell Classifieds
    Ola, I have these 2 posts on Kijiji, Strut Tower Bar Ultra Racing - Chevy Cruze | other parts, accessories | Calgary | Kijiji 4x Fast 18" Rim Winter iCept - 225/45R18 | tires, rims | Calgary | Kijiji Both in Canadian Currency. Thoughts? How can I sell these better, and is anyone here...
  17. Gen1 Wheels, Tires, Brakes, & Suspension
    Hey everyone, i just installed new swift springs on my pedders coilovers and i had to re adjust the ride height. My question is, how much clearence is safe between the axle and the front strut? I have about 10-15mm from the bottom of the strut to the top or the top of the outer cv boot. Will...
  18. Canada
    Just wanted to post this locally as well as in the classifieds.
  19. Cruze Parts
    The time has finally come to trade the 2011 Cruze in, so I am getting rid of a few things. I have an Ultimate Racing Front STB for sale - $50.00 **Local only...I don't have anything to ship something that size with** No scratches or rust, pictures upon request (we all know what it looks...
1-20 of 47 Results