Chevrolet Cruze Forums banner
stud
1-9 of 10 Results
  1. Gen1 Wheels, Tires, Brakes, & Suspension
    Read about HOW TO ... do this in various threads. Thought I would Sum Up my experience. Stud Sizes are L1 = M12 x 1,5 x 51 mm total length - Includes a L3 = 15.5 mm shoulder length Stud size are L1 = M12 x 1.5 mm x 49 total length - Includes a L3 = 13 mm shoulder length L2 = ~12.2 mm...
  2. Gen1 Diesel Technical Discussion
    I have a 2014 cruze diesel, I broke off a front wheel stud while hand torqueing my wheels to 100 ft/lbs (mystery) anyway, I found the thread on grinding the back of the new stud to slide it in without the bearing removal. I haven't tried this yet as I had to order one, but I was wondering...
  3. Gen1 Wheels, Tires, Brakes, & Suspension
    Hello all, Dose Holden Cruze have stud pattern for 114.3 ? I only hear that the 5*105 for petrol and 5*115 for diesel . I wanna buy a set of wheels(235/45R18) . They are off 2014 Sri Holden Cruze . but the seller said that the stud pattern is 114.3. Thanks for your help.
  4. Gen1 Wheels, Tires, Brakes, & Suspension
    I have a 2011 LT with drum rear breaks. Was putting on winter tires last night & one of the nuts kept turning on the stud as I was trying to tighten to 100 ft. lbs. torque. I noticed that it was the stud that was starting to pull out, instead if the threads stripping. So I dialed the wrench down...
  5. Gen1 Wheels, Tires, Brakes, & Suspension
    Hey guys I need some help. I got a 12 base model cruze and purchased the Eco 15 spoke wheels for it. I'm about to mount them, but I notice a different in size holes on the wheels that go into wheel studs. Their is a lot more play with the Eco wheels. It almost seems like they use bigger wheel...
  6. Gen1 Wheels, Tires, Brakes, & Suspension
    Hello everyone..first of all I want to thank you for reading my post. I am in need of ten new lug studs for the rear wheels on my cruze LT. it has drums on the back. I want to know if there is any way possible I can find studs the same size as mine from another vehicle that are much stronger...
  7. Gen1 Wheels, Tires, Brakes, & Suspension
    So i recently purchased some 13mm wheel sspacers and Im having trouble finding somewhere that sells extended studs for my Cruze. Does any know where I can get some? Or does anyone know the specs of the stock studs?
  8. Gen1 Brakes/Suspension Tutorials
    Be forewarned, this is a difficult DIY. If you do not have a well-equipped toolbox, do not attempt this. This DIY assumes you are comfortable working with disc brakes, and know how to properly jack up and support your Cruze. DISCLAIMER: This is for instructional purposes only. Neither I nor...
  9. Gen1 Service Issues
    One of the wheel studs wasn't torquing down, so I kept loosening and tightening it with my clicker torque wrench. The stud decided it had enough, so it snapped at well less than the 100 ft/lbs the torque wrench was set to. :angry: All of the other studs torqued down fine and clicked at 100...
1-9 of 10 Results
Top