Chevrolet Cruze Forums banner
studs
1-10 of 10 Results
  1. Gen1 1.4L Turbo
    Hi All, In the process of replacing the turbo charger (which may be its own post in the future depending on how that goes..!) in my 2012 Cruze, I had to remove the catalytic converter. When it came time to detach it from the rest of the exhaust system (where it's held on with 3 bolts), I...
  2. Buy/Sell Classifieds
    I have 4 LIKE NEW GENERAL BLIZZAK WINTER TIRES ON STEEL RIMS I PURCHASED NEW LAST NOVEMBER (on tirerack) for my wifes 2013 Cruze … She got a new jeep so no need for the tires..... first400 obo takes them im in central pa.... They have 2500 original miles on them I of course have pics but no...
  3. Gen1 1.4L Turbo
    Is there a specific torque I need to set the exhaust manifold studs/nuts to? Also, is there any trick to getting a socket on that far left lower nut? 1/8 a turn at a time will take me all day.
  4. Gen1 1.4L Turbo
    Hello everybody, I need the help of anyone who has a cruze 1.4 head off of their car I recently talked to a representative from ARP and they said that if we could help gather some info they could develop a kit for head studs/bolts. And unlike previous quotes it will be for a lot cheaper than 200...
  5. Gen1 1.4L Turbo
    I'm about to replace my turbo, I've been told i need to replace the hardware holding the turbo on the engine. My question is does any one know the part numbers for them. I already have all the new seals and gaskets, I just need this last part(s).
  6. Gen1 Diesel How-To & DIY Library
    Since there are a few documented cases of these bolts shearing off and other cases where dealers are replacing them voluntarily, I decided to change mine out since I am outside my warranty and I had significant laminar corrosion all over the flange. I also have a persistant P11D7 code (may or...
  7. General Discussion
    hi all can anyone tell me where to get cylinder head studs for my 1.4L arp does not make them
  8. Cruze Parts
    Guys, Two front wheel bearings in v.good shape. Dealer misdiagnosed problem (it was transmission as you can read in my thread here) so I've got new bearings in, and two perfectly good bearings sitting. I've read about some of you snapping the studs, well here's a cheap solution, and regardless...
  9. Gen1 Wheels, Tires, Brakes, & Suspension
    Is there suck thing as extended wheel studs for the cruze? Would like to put a 10mm spacer to space the stock wheels out a bit. also if anyone has done it, how hard are they to install?
  10. Gen1 Wheels, Tires, Brakes, & Suspension
    So i recently purchased some 13mm wheel sspacers and Im having trouble finding somewhere that sells extended studs for my Cruze. Does any know where I can get some? Or does anyone know the specs of the stock studs?
1-10 of 10 Results
Top