Chevrolet Cruze Forums banner

switchback

  1. Gen1 Appearance, Body, Detailing, & Interior
    Alrighty. So guys, I'm thinking about installing a switchback bulb into my headlights but I ran into some problems. I have a 2009 European version Cruze. My cruze uses a PY21W socket for the bulb, which has only two wires. So, I'm afraid if I can even use the switchbacks since I don't have a...
  2. Gen1 Appearance, Body, Detailing, & Interior
    What's up Cruzetalk, I posted on here like a week ago showing I installed my LED tail light bulbs and liked the sleek look so much I had to start looking to do the headlights. Well I settled for the LED Switchbacks on eBay for $15.37 which I didn't think was a very bad price but...only...
  3. Diode Dynamics
    I had these switchback LED's from DD on my last vehicle so i went ahead and put them in my cruze. The big thing for me is when the signal isnt active the bulb is lit up white instead of orange. i hate the look of orange bulbs on any car. When paired with a good set of halogen bulbs or...
  4. Gen1 Audio & Electronics
    I have switchback LEDs and therefor get hyperflash. Wanted to get load resisters in there to prevent this, but I didn't want to cut into the stock wiring. The stock wires are too short as it is, plus if I ever go back to regualr bulbs this makes the change easy. It took some searching, but I...
  5. Gen1 Appearance, Body, Detailing, & Interior
    I thought I saw on a post somewhere a resistor that plugged into the headlight plug, and then the other end you plug the LED bulb into. This way there was no need to use a quick splice. Is there such a product or am I imagining things again?
  6. Gen1 Audio/Electrical Tutorials
    well hay there! i looked around to see if anyone had done a write up on this with no results, SOOOOOO i did this myself and heres what i did DISCLAIMER: this can be easy or hard depending your your level of experience, i work on cf-18 hornets in the canadian forces so this is oh so easy for...
  7. Lighting
    Has anyone had this issue? I purchased the proper bulbs. They plug in fine and work but the problem is I can not get them to go inside the headlight. They are a little to big at the tip of the bulb. :uhh:
  8. Lighting
    Just picked up my switchback led signal lights tonight. Having some issues with the whole switching back thing.... White running lights, look amazing especially next to my stock headlights (definitely changing them tomorrow) but they are not turning off when I turn my signal on. The amber diodes...
  9. Lighting
    hey i just got my switchback signals and they work great. it cost me $40.00 and about 10mins they are really cool!!!
  10. Gen1 Audio & Electronics
    I installed "switchback" (white for running lights, amber for turn signal) LED strips as seen on the home page COTM. I used a T-splice to connect the wires from the LED strip to the turn signal cables on the car. I started to have issues with the passanger side. When the headlights are on...
Top