Chevrolet Cruze Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 21 Results
  1. Gen2 Audio & Electronics
    Hey guys - not sure if I'm in the right section but I was wondering if anyone can help me identify the wires on the outside, larger tail light assembly that houses the turn signal. The plug has 3 wires, black, red and gray. I'm assuming black is negative. The taillight has 3 functions - night...
  2. Gen2 Appearance, Body, Detailing, & Interior
    Okay so I posted this on another thread but thought I would start a new one to post pictures and a video. I installed these on a Saturday, took me about 6 hours start to finish but now that i know what to do it's probably a 2-3 hour job. The install does require splicing into the factory...
  3. Gen2 Audio & Electronics
    I've seen a lot of posts here about converting to LED lighting for headlights, interior lights, rear lights, etc., but nothing about converting the rear turn signals to amber LED. Does anyone know if this is possible with the OEM tail light housing? I like the design of the turn signals and...
  4. Gen2 Audio & Electronics
    Sorry If I missed it, but can someone who has done so share their experience of changing the tailight and backup bulbs to leds? Do you access/remove via the interior panels? Thanks!
  5. Gen2 Appearance, Body, Detailing, & Interior
    So yesterday I was taking my wifes work stuff out of the trunk and I noticed that the Passenger Side Rear Taillight Housing has a chip out of the corner of it. :banghead: Like it snapped off and is gone. So I got super pissed and started to investigate some more. There are NO scratches or...
  6. Gen1 Appearance, Body, Detailing, & Interior
    I bought some dark smoke tail light tints to put on my tail lights only, not headlights. The law in Ohio is that the brake lights need to be visible from 500ft back (166 yards) behind the vehicle. I'm not 100% sure if my stock bulbs will shine bright enough through the tint so I was wondering...
  7. Lighting
    So I installed new LED bulbs in my taillights a few days ago, and noticed that the two interior trunk lights are always fully lit as if the brakes were on. Anyone who installed LED's in their tails have this happen, and find a solution? Thanks
  8. Cruze Parts
    Good evening. Selling a OEM driver side taillight harness. For 2011-2014 Cruze. Brand new never used. Redesigned harness I've noticed from comparing to mine. Part number 95384050 Asking $40 Will have to figure out shipping once I get a zip code.
  9. Gen1 Audio, Electronics & Electrical
    So I have posted this before, but the problem still continues. My 2012 Cruze has had the Technostalgia tail lights installed for about a year now. I have noticed that when I start the car (either remote or in the vehicle itself) something on the lights won't work right or the light will be to...
  10. Gen1 Appearance, Body, Detailing, & Interior
    So here are the rough preliminary stages of my LED taillight retro. I wanted to get a feel for a good technique for disassembling the rear of the tail without hacking it up. Also needed to see what kind of space in the chrome reflector bowl there was to mount the LED puck. I decided to go with...
  11. Gen1 Appearance, Body, Detailing, & Interior
    I purchased the over lays in the mixxed auto design group buy made possible by smurfenstein. Thanks again by the way! Any ways they turned out awsome and were easy to install
  12. Gen1 Appearance, Body, Detailing, & Interior
    Looking for any experience others have had with chrome tail light bezels. I have attempted to order Putco bezels that are outline-only with a chrome border between the red and white portions of the tail light. 11-13 Chevy Cruze Tail Light Bezels - Chrome (Complete Set, Taillights not...
  13. General Discussion
    My 2012 Chevy Cruze, Racing Stripes! HA HA!!!! how Bad Ass is that? BMW U Halo Projecter Headlamps Mercedes Style LED Fogs, Stainless Mesh Grille I Installed everything but the Racing Stripes all by myself. It was scary seeing my Cruze torn apart! But the Pride and Satisfaction I have...
  14. Gen1 Appearance, Body, Detailing, & Interior
    Hello all I was wondering if you could use something else to tint your headlights/taillights, other than vht nightshades. I am looking into tinting my taillights/headlights and markers, but I want something that'll be durable and last longer than 3 or even 5 years on my car without it starting...
  15. Gen I
    This is a 4 piece set of taillights off of a 2013 Chevy Cruze. selling the entire set together. just purchased the car and bought aftermarket taillights. do not need these anymore. they are brand new right off a car with less than 200 miles on it and have no defects whatsoever. these are the...
  16. Lighting
    Hello Everyone, I was wondering how to disassemble the tail light housing so I can pack them with LED's. I have the wiring all figured out I just need to figure out how to get the tail lights apart. Do you just put them in the oven like you do for headlight mods and what not? Any input would...
  17. Gen1 Appearance, Body, Detailing, & Interior
    Hey guys! Just did taillight tint and black metallic vynil overlays. Really love the look of it all. Next up is de-badge , and front vinyl overlay. Just trying to keep the changes subtle, but set it apart from cruzes in my area. Check it out! Sent from my HTC One X using AutoGuide.Com Free App
  18. Gen1 Appearance, Body, Detailing, & Interior
    Hey guys/girls I just got my tint for the back lights and was thinking about taking the taillights out and then putting them in or should I just leave then in and do it that why help and thanks After I put them in I'll put a video on how I did it on YouTube. Thanks
  19. Gen1 Appearance, Body, Detailing, & Interior
    I purchased the taillight tint off and installed them tonight. Very nice and easy to work with. Applied very smoothly with very GOOD instructions provided by grafxwerks. Pics will be up tommorow morning during the day and night time ! CHEVYCRUZE RS
  20. General Discussion
    Is there anyway to open up the factory taillights and remove the reflectors that are sitting inside the lights? I've seen pics online where people have done this and it makes the lights look awsome! Im really interested in doing this just dont know how to get the taillights opened...
1-20 of 21 Results