Search Results for ‘tap’

Jump to post 13 for the tutorial Hey everyone! I have had my 2017 Cruze for about a month, and am looking to "permanently" install my dash cam. It is a N2 Pro. I purchased a Vivocation Vico-plus, as I have heard it's the best at preserving battery life whilst offering parking mode. The...

I'm going to installing an auto dimming mirror into my Cruze this weekend and need a wire diagram of the overhead console to help me with identifying what to tap into. Thanks! Sent from my SM-G965U using Tapatalk

Looking to take from factory speaker outs and add a line converter for an amp. What's the best way/best place to do this with base MyLink?

Folks, I used to fly in the USAF and can't get enough engine instrument data. The Cruz doesn't show you too much by default on the DIC. Somebody recommended this to me a few years ago, but I never made the purchase. It's a little pricey at over $250, but I like the way it integrates with...

Hi Guys, For those of you that want to know how to install a fuse tap and wire your dash cam up neatly, I put this together. Hope it helps someone. Items required: 10 mm socket Crimper 12v socket Ring Terminal Spade Terminal Disconnect Terminal Butt Splice Connector 18 guage spool of black...

Which wire do I use for a remote turn on wire for my aftermarket amp in a 2017 Cruze LT non BOSE. I need a wire that doesn’t turn the amp off when the auto stop start restarts the engine. I am amplifying the door speakers with this amp and not just adding a sub. Does anybody know. I had a 2017...

Hello. I've looked on the site but couldnt find an exact answer, i'm installing custom fog lights and want to tap in the battery with a custom switch. My questions are, can i easily run the wires through the grommet and bring the wires into my car? And/or is it easier to tap in the battery? And...

Anyone use a mirror tap in their Cruze to power a radar detector? I'm looking at getting one and like that idea of close power and clean install. Thanks.

Is is safe to tap into the wire for the low beams to power two LED strip lights? I would like to install LED on the filler panels were the fog lights would be, and I would like to just power them with the headlights.

I was thinking about doing a project but before I go through all the work I am trying find my point of entry. My goal is to simulate the gear shifts of the triptronic system on the automatic car using my phone or some other device. My knowledge of automotive computing is very limited. Is gear...

Howdy-new to this GREAT forum-tons of info here for sure, I am in the process of hooking up a powered tail light converter (found a much better deal than curt on ebay-pictures and how to to follow) anyway I have a 2013 cruze still under B-B factory warranty and need to properly power this...

Hey guys so im doing an system install on a chevy cruze this week that will require a Line out converter. I know how to hook them up, im just curious where the best place would be to tap into the speaker wires would be at? I was thinking about taking the the left 2 doors off or just the back 2...

I am about to put lights in my car and want to use a fuse tap to power them. I'm going to tap into #6 fuse in the fuse box, but am a little confused. The fuse tape says its max is 10 amps, but the tap has two slots one for the accessory and the other for the regular use. Does the 10 amp max...

Bule LED Door sill scuff plate For Chevy Cruze 09-2011 | eBay I want these, but I want them to only come on when i open my door

Maybe I'm crazy but I could have sworn that when I took the cruze out for a test drive you were able to click the directional towards the right or left turn signal and get 3 blinks of the light. That's a great feature when changing lanes. I get into my new cruze last night and no 3 blinks of...