Chevrolet Cruze Forums banner
tie
1-20 of 20 Results
  1. Gen2 Wheels, Tires, Brakes, & Suspension
    Greetings, I'm a new owner of a 2018 Cruze LS with the basic 15 inch steel wheels. I want to purchase a spare but I've read differing accounts. I've seen that some people say that all years have the same spare. But some say that 16-19 uses a different size. Can anyone steer me in the right...
  2. Gen1 Appearance, Body, Detailing, & Interior
    So I got to looking at my '14 Cruze, and start planning on going from gold to black bow ties, when I noticed that the bow ties (front/back) are filled with some kind of clear poly, all the way to the top of the surrounding chrome. :$#angry: I was going to clean them up and Plasti-Dip them...
  3. Cruze Parts
    Inner tail lights - 60 shipped Chrome panel (no camera) - 50 shipped Bow tie with carbon fiber vinyl - 15 shipped Spoiler - aftermarket- blue topaz - has some silicone crap on it, could probably be cleaned with quite a bit of effort :-/ (best offer) Sent from my iPad using Tapatalk
  4. Gen1 Appearance, Body, Detailing, & Interior
    Has anyone removed the front Bow tie? If so were there any tricky clips and such to deal with? Do you have any photo's? I am getting as much information together for my front end rebuild before I start as this is my daily driver. I have found a combination of videos and posts for the...
  5. Gen1 Wheels, Tires, Brakes, & Suspension
    Looks like 1 1/2 inches but assume it's metric and can't get an accurate measurement. Anybody know the size?
  6. CruzeTalk New Member Introductions
    Good day everybody I'm newish to the Cruze community. I purchased my 2014 1.8 L Cruze LS Manual a little over a year ago. I consider myself a dumb car guy. I know enough that I don't have to take my car to the garage for everything but not enough to consider myself a car guy. My passion and...
  7. General Discussion
    I am in the process of ordering a Yakima roof rack for my cruze. I will be carrying two sit on top kayaks on it and was wondering where is a good place to tie the bow strap down at. I cant seem to find a tow hook or anything solid directly under the front bumper. Thanks for all your help
  8. CruzeTalk New Member Introductions
    Hello, I'm a current owner if a '13 wrx and am looking to get into a cruze. I've owned Chevys my whole life up until buying the subaru which was a mistake. Anyway I joined here to do some research and try to decide between the 1.8 and 1.4t if anyone's got advice that'd be great! Looking for...
  9. General Discussion
    News outlets are reporting that GM is number 3 in sales for the 1st half of 2014. I looked up the press releases and information on each of their websites, and the numbers are so close that statistically it looks like a three way tie to me. Here are the reported sales numbers for the first...
  10. Cruze Parts
    Hey guys, I'm looking to stiffen up the rear end a little. So i'm looking for a Ultra Racing Rear Lower tie bar. Love the idea of the sway bar (i've had them on all my cars) but I want something a little less involved to install....and cheaper. I'm only keeping the car for another year and a...
  11. CruzeTalk New Member Introductions
    Picking up my new to me 2012 cruze eco as my ram is killing me in fuel and my 02 jetta is falling apart at 132,000 miles. This will be replacing the jetta I drive to work (70 miles round trip).
  12. Gen1 Appearance, Body, Detailing, & Interior
    I just got a new bow tie and i have a couple of questions. How to take the old one off? and the best way to get wiring from my trunk deck to the battery. Also wanting to install a switch somewhere in the drivers side to turn the light on/off. thanks
  13. Gen1 Appearance, Body, Detailing, & Interior
    I've been considering blacking out the bow tie emblem on my steering wheel. Has anyone done this and if so, have any tips for what works best whether that be pastidip or other? Also, does anyone who has done this have any pictures they could share?
  14. Gen1 Audio/Electrical Tutorials
    this took me some time to do, the hardest part was the stripping of glue from car and bow tie. sorry for lack of photos tools: utility knife painters tape trim removal tool #7 socket goo gone rags hair dryer or heat gun( i used hair dryer) patients some way to clip into power continuity...
  15. Gen1 Appearance, Body, Detailing, & Interior
    Just did my glow tie in literally 3 minutes haha how u like it? Sent from AutoGuide.com Free App
  16. General Discussion
    I've seen a lot of people use vinyl stickers to black out their bow ties. I have also seen that GM sell actual emblem inserts (chrome or black) to replace the gold ones. The stickers are ~ $12-$15. The pieces from GM are ~ $80. I am a little concerned using the vinyl sticker being that it's a...
  17. General Discussion
    does anyone know if the chevy bow tie on the back is pressed on or screwed on? im trying to install a led bow tie but dont know how to take off the stock bow tie.
  18. Gen1 Audio & Electronics
    I am wondering if anyone has tied an after market amp into the factory upgraded Pioneer system. I know that there is a factory amp in this system. I want to take the low pass and run that into the amp that I bought so that the rear deck speakers still function but the low signal goes to the new...
  19. Gen1 Appearance, Body, Detailing, & Interior
    I have the 2011 cruze LTZ and I just received the black bow tie emblem I just bought. I was trying to install it and I think I accidentally broke the little clips on the inside of the bumper for the emblem. Is this a problem and if so can I buy a new one? And my main question is does anyone...
  20. General Discussion
    who sells these inlays? Thanks in advance. Al
1-20 of 20 Results
Top