Chevrolet Cruze Forums banner

torque

  1. CruzeTalk New Member Introductions
    It's an amazing car great handling and right for the road. First in its class. Robust and gentle to the touch. I do want to add more personality that reflects my taste.
  2. General Discussion
    I cant get the transmission temp to read on the torque app. Just got it to do a trans drain and fill....I was hoping, relying on the trans temp from this app how can I make it work? Anybody else encounter this? Also the boost gauge is wierd to read never had a boost gauge before but it's from-12...
  3. Gen1 Appearance, Body, Detailing, & Interior
    I'm reassembling my steering wheel and realized I did not have the torque spec. Does anyone have this? I'll check back when I ready to put the airbag back incase no one on right now has it. Thanks Robert FWIW 2014 LT
  4. Gen1 Appearance, Body, Detailing, & Interior
    Does anyone know the torque specifications for the four bolts holding down the front seats and the three nuts for the rear seats? I also need a part number for the blaack plastic post seats for the headrests. That would be the long deformed thing in the picture.
  5. Gen1 Diesel General Discussion
    Anyone using this App with a OBD2 to monitor regens plus many other functions?
  6. Gen1 1.4L Turbo
    Hello all, I was wondering if I could get some help examining a transmission fluid leak on my 2013 Chevy Cruze Eco 6spd manual 1.4t with 100k miles. I know for sure my MTF is leaking due to when I did my first drain, only 1.25qts came out. I decided to put MTF dye into my fluid to examine...
  7. General Discussion
    Hey guys . Using torque app to help diagnose my issue. I want to see if there are misfires in each cylinder so I went into "manage extra pids" , clicked on " add predefined set" and checked off GM. They are all green now but where do I see the data? It's not in my general dashboard.
  8. Gen1 Powertrain
    When replacing the torque converter seal on a first gen automatic, do the axle shafts have to be removed from the transmission? I know the transmission has to be lowered and I order to do this do the dealerships/shops remove any of those?
  9. Vendor Deals
    We just spotted an Autoguide.com favorite 1/2" drive torque wrench on sale via Amazon.com. The Tekton 1/2" drive torque wrench is rated for 10/150 ft.-lb. and features sturdy all metal construction. With the current 29% discount, it's priced at only $28.50! Read More About The Torque...
  10. Chevrolet Cruze News and Reviews
    Trifecta Performance is transforming Chevy Cruzes into mean machines at the touch of a button. This Seattle, WA-based tuning firm has cranked up the performance and fun factor of this typically average and understated car by up to 44 horsepower and 51 lb-ft of torque out of its diminutive...
  11. Gen1 1.4L Turbo
    Hey all, I'm about to replace the serpentine belt on my wife's car, but need more info on the motor mount bolts. 1. Are these torque to yield bolts? 2. What are the torque specifications for both the MM bracket to vehicle (3x) and MM to engine bolts (3x)? I've searched around and couldn't find...
  12. Gen1 Powertrain
    I can't believe this thing. It's a 2013 Chevy Cruze LS we got at about 80,550 miles and now just under 90,000 ans so far, it got a new catalytic converter, oil cooler repair, broken driver side power window - glass is good, just doesn't go up or down, new coils and now I'm replacing the...
  13. Gen2 Powertrain
    Making this available for everyone.. a copy/paste.. Single Use Threaded Fastener/Component Tightening Specifications Note: All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. Application Specification Metric (English) Automatic...
  14. Gen2 Powertrain
    Making this available for everyone.. a copy/paste.. Single Use Threaded Fastener/Component Tightening Specifications Note: All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. Application Specification Metric (English) Automatic...
  15. Gen1 Powertrain
    Does anyone have access to the torque specs for 2011 Cruze Eco? I need the numbers for the bolts on the Coolant Outlet Flange.
  16. Gen1 Powertrain
    Hi I fired up the Torque app Pro and in the list of sensors from the ECU the transmission temperature is not listed. I added the guage and it says "no data". Am I supposed to set this up somehow? Also I have a fairly old OBD2 plugin.. Its an ELM327 with firmware revision 1.5.. Could this be...
  17. General Discussion
    So,on my 2011 cruze eco, I have 148HP, and 138lb ft of torque. Is this: 1- Directly measured at the engine? Or 2- Measured at the wheels? And if I have a result, measured at the wheels, would HP and Torque measured in final gear,or in 4th gear,which is closest to a 1:1 ratio?
  18. CruzeTalk New Member Introductions
    Does anyone have the torque settings for the following: Flex plate Torque converter Engine mounts Any help would be highly appreciated! Thanks so much!
  19. CruzeTalk New Member Introductions
    Hey all, I have a 2015 Chevy Cruze LTZ that's currently in the shop for a P0703 Torque Converter failure. I've owned the car for not even two years yet and it has less than 10k miles on it. The service tech said this isn't normal, but that the part just simply failed. It first started with a...
  20. Gen2 Diesel General Discussion
    Has anyone setup a scan gauge or used torque pro on one of these cars yet? I bought one last Saturday. Sent from my SM-G955U using Tapatalk
Top