Chevrolet Cruze Forums banner
upper
1-20 of 32 Results
  1. Gen2 Appearance, Body, Detailing, & Interior
    Has anyone else had this issue with their Gen2 sedan? I've been babying my Cruze for the past year, with 3-bucket washes and multiple layers of protection. However, I noticed one small crack in the (I forget the proper name for it) plastic surrounding the brake light above the rear windshield...
  2. Gen1 1.4L Turbo
    All, The upper radiator hose on my 2012 1.4L (109K miles) has a hole in it where it looks like it was rubbing on a wiring harness (this is about 3 in down the hose from the water outlet). For the life of me I cannot find out how to reach the bottom clamp? Does this require removal of the...
  3. Gen1 Service Issues
    2012 Cruze LT 1 automatic, This car is something else, since 30,000 miles we have had the Tourqe converter seal replaced, cam seals, oil pan gasket, valve cover with the wonderful Pvc valve, the water pump leaks around the bolts and gasket when it gets real cold outside, and now at 96,000 miles...
  4. Gen1 Service Issues
    This car is something else, since 30,000 miles we have had the Tourqe converter seal replaced, cam seals, oil pan gasket, valve cover with the wonderful Pvc valve, the water pump leaks around the bolts and gasket when it gets real cold outside, and now at 96,000 miles the upper coolant hose...
  5. Gen1 Service Issues
    This car is something else, since 30,000 miles we have had the Tourqe converter seal repalced, oil pan gasket, valve cover with the wonderful Pvc valve, the water pump leaks around the bolts and gasket when it gets real cold outside, and now at 96,000 miles the upper coolant hose sprung a leak...
  6. Gen1 Brakes/Suspension Tutorials
    You will only need a couple tools for this. You will need the strut bar if course. I believe BNR has it. Should take 10 to 30 minutes to install depending on how fast you go with these tools. It's awkward at times when putting the nuts to torque. You will need a lb/ft torque wrench, a 7mm Allen...
  7. Buy/Sell Classifieds
    Does anyone have an upper intercooler pipe for the 2011-2016 Cruze 1.4 they could ship to me? Zip code 48911. My local junk yards just throw them out... It's the intercooler to throttle body pipe. It looks like this:
  8. Gen2 Powertrain
    Finally completed installing cold air intake and my upper intercooler piping project. Love the way it looks and can feel a little bit more responsiveness. Aem cold air intake 2" tubing with 3 2" elbow and 2 2" to 2.5"
  9. Gen2 Powertrain
    I just completed my DIY intercooler Upper pipes for 2016+ Gen2 Cruze. No one has it available, so i did it myself. I currently own a Cobalt SS and my wife has a Gen 2 Cruze Sedan Manual Shift. The ZZP upper and lower pipes on my Cobalt SS were measured and saw that it was close and angles...
  10. Cruze Parts
    Thinking about selling some stuff. TTR upper motor mount, used for 2 summers. Silver mount, with red bushing. Comes with the included bolts and instructions. $150obo. Ported intake manifold, with slightly ported throttle body. also includes fuel rail and injectors. $180obo. Can send pics, and...
  11. General Discussion
    Hey all.I haven't posted in a while as I have moved out to the country and can't find an internet provider, anyways. I am about to embark on my first "cruze" roadtrip. I can't wait to see what kind of mpg I get. II'm going to chicago,wisconsin dells and minneapolis,Kansas city and everwhere in...
  12. General Discussion
    Hi. I don't know where to post this... But i want to know what you guys do to clean this parts on the upper glovebox and door insert ??? Dust stay in there and i have a little spot in the passenger door... Don't know if i can use a terry cloth or microfiber to remove it or it will leave...
  13. Cruze Parts
    As title says ^^^ Wanting to buy a Front upper strut bar for my 2012 Cruze. Thanks! Sent from AutoGuide.com Free App
  14. Gen1 Powertrain
    See attached pictures. I noticed this difference and searched the forum but did not find anything. Both of these pictures are of the grill opening on Cruze "ECO" cars. I'm wondering why my car (the dark blue one) is a 2012 and has a larger upper grill opening. I see the difference on a lot of...
  15. Cruze Parts
    K&N typhoon 1.4t short ram $150 shipped TTR black on black uppter mount $150 shipped both have ~3,000 miles on them Text me for pics or questions 602-803-2080
  16. Gen1 1.4L Turbo
    2012 LTZ 45k miles on 3rd water pump. Another water pump about to fail? Sprayed belt with water made no difference, not overheating, coolant temps normal, engine bay has always smelled of coolant. No leaks visible.
  17. Midwest
    Anyone in or around the U.P. ?
  18. Gen1 Wheels, Tires, Brakes, & Suspension
    Only one I've seen was on ebay from Ultra racing.. anyone know where else i can find one.. looking for one for a 1.8 2012 ls.. any links or pics would be awsome..
  19. Gen1 Brakes/Suspension Tutorials
    Estimated Time 2.4 Hours @ $80 (My shops hour rate) or $192 (WAY MORE AT DEALER!) Tools Needed for the job at hand. A lot of willpower:$#angry: Sockets 1/2" 15MM 1/2" 18MM 1/2" 19MM Wrenches 14MM 18MM 3/8" Drive Ratchet Hammer 1/2 Impact if You Can:th_coolio: 1/2" 24MM Small Bottle Jack...
  20. Gen1 Wheels, Tires, Brakes, & Suspension
    So I received the UR Upper strut bar yesterday and installed it on my car. I like that the car does feel more taut, but I also noticed that there was more 'thud' when going over bumps. Nothing jarring, but the car seemed to absorb bumps better without the bar. I've only driven on it once so far...
1-20 of 32 Results
Top