Chevrolet Cruze Forums banner
valve
1-17 of 187 Results
Advanced
  1. Fuel Economy
    2012 Cruze LT. I’ve been through hell with this car, replaced the engine less than a year ago, have replaced several leaking coolant hoses, My car overheated on me, I made it home and realized one of the hoses was disconnected and a little shot. I replaced that and it’s no longer leaking...
  2. Gen 2 Tuning/Modifications
    I couldn't seem to find any videos for the valve using a CAI. If anyone is curious this is how it sounds.
  3. Gen1 Engine/Transmission Tutorials
    Here to fine tune my original DIY post on fixing the P2076 intake manifold tuning valve issues. Symptom: CEL is illuminated with code P2076 - intake manifold tuning valve position sensor or switch circuit range / performance Problem: The lever connecting the tuning motor to the intake manifold...
  4. Gen1 1.4L Turbo
    I’m going to do the pcv valve fix while I am fixing a rocker arm leak and also new seals in the cam sensor/actuators. My orange pcv valve is still intact. Do I pull it out with needle nose pliers or clip it off through the hole for the corrugated hose?
  5. Gen1 Service Issues
    Hello. A few days ago I started my car and it was very rough. It started fine the rest of the weekend. This morning the engine light came on when I started the car to go to work. I just had this problem in January of this year. This problem has happened 3 times now. Is there anything that could...
  6. General Discussion
    hey everyone, I just wanted to know if anyone else is having the same problem I am. I have a 2013 Chevy Cruze LTZ. I replaced that valve cover because thats the code me check engine light was giving me.. after I replaced it and reset everything the code came back two days later and is throwing...
  7. General Discussion
    Hello, I just recently changed my valve cover and gasket with OEM. I torqued cover in sequence with 71in.lbs. I scraped off old gasket remnants and used black high temp gasket maker silicone where timing chain cover meets the head. No signs of oil leaking anywhere from valve cover. My issue I am...
  8. Gen1 Diesel General Discussion
    I'm hearing a whirling/whining sound after engine shut down for about 15 seconds. From what I've read here, it's probably the Fuel Rail Pressure Control Valve. Does this sound means it's getting time to replace or is it normal. It just started doing this a few weeks ago. We have around 150K on...
  9. Gen2 Powertrain
    Hello everyone. Can anyone tell me how to take off the valve cover of a LE2 1.4L Chevy Cruze engine? And are there any special tools I will require?
  10. General Discussion
    Hello, My 2014 Cruze has 93,000 miles on it and have discovered the squeaky noise coming from the engine. By a previous post discovered by pulling the dip-stick the noise went away, so the PCV may be an issue, I checked it and everything there is fine its not sucking any air. So, its the crank...
  11. Cruze Parts
    I have both XtremeRevolution's Big 3 kit and his V1 Manifold PCV valve fix kit as well as the BNR throttle Body Spacer for sale My cruze got totaled by a deer before I got an chance to install them. All are brand new and never been installed BRN Throttle Body - $55 Big 3 Kit - $45 V1 Manifold...
  12. Gen1 1.4L Turbo
    Not a thread about needing help fixing something so not sure if it belong here but I plan to buy a used forge motorsports atmospheric by-pass valve tomorrow for $140 CAD. It comes with both green and yellow springs and the guy selling told me his car is tuned and the by-pass valve has 18,000kms...
  13. Gen1 1.4L Turbo
    Hi all, i have a 2012 Cruze Eco 6 MT with just over 100K. i'm getting check engine light with code P0496. i found great basic info here searching the error code & it sounds like either part in question can reasonably fail at this mileage but what's not clear is how to tell whether the purge...
  14. General Discussion
    I have a couple holes stripped out on the head of my 2011 Chevy Cruze. Does anyone know the size of the helicoil that I will need to use the same bolts?
  15. Gen1 Service Issues
    There seem to be two distinct sources of "ticking" noises from my 2015 2LT AT, 67k miles. The louder of the two sources I have determined is the purge valve solenoid behind the engine. I've read differing accounts on whether this is normal for the purge valve, and many reports where replacing...
  16. Gen2 Powertrain
    BNR is proud to announce the immediate availability of our High Performance Bypass Valve for the Gen 2 Cruze 1.4T! Faster Spool More boost, sooner More boost, longer Increased throttle response MUCH louder chirp/blow off sounds from the turbocharger, especially with an aftermarket intake...
  17. Gen1 Powertrain
    Hey Guys! I replaced my valve cover gasket on my 2012 Chevy Cruze 1.8L today and went to tighten the last bolt and....SNAP. Does anyone happen to know what size/thread bolt it is? I did some looking online and in this forum and I can't really find anything specific. It's one of the shorter...
1-17 of 187 Results
Top