Chevrolet Cruze Forums banner
windshield
1-19 of 101 Results
Advanced
  1. Gen1 Appearance, Body, Detailing, & Interior
    I have had my Cruze for going on seven years and up until the other day my windshield was in perfect condition. I was driving along on a four lane highway (going about 65mph) and I noticed there was one of those double gravel trucks driving relatively slowly in the right lane. I wanted to get...
  2. Gen1 Appearance, Body, Detailing, & Interior
    Is the Windshield Washer Reservoir Cap replaceable? When I look up, the part comes back as either the whole tank or the filler neck.
  3. Gen1 Appearance, Body, Detailing, & Interior
    Anyone else have problems with the Cruze windshield our 2015 is probably the worst windshield I have ever come across in any vehicle ever! Have no idea what kind of glass its made of but it looks like small chips all over about the size of a grain of sand probably several thousand, I have never...
  4. Gen2 Appearance, Body, Detailing, & Interior
    My son has a 2018 Cruze with a cracked windshield. The dealer told him that his windshield has a temperature sensor, a humidity sensor, a noise buffer and of course some sort of coating to filter out some types of light. These features make for a somewhat expensive replacement windshield -...
  5. Gen1 Appearance, Body, Detailing, & Interior
    My driver side windshield wiper stopped working tonight. I discovered that the linkage separated at the wiper arm. Do I need to replace the entire linkage or is the bushing replaceable?
  6. Gen1 Service Issues
    Hello! I am new here but have had my Cruze for a year now. So the problem I am having is that when pulling the lever to wash my windshield, nothing happens. Nothing sprays out and the wipers do not activate. I don't hear the hum of the pump so I thought maybe that was the issue but would that...
  7. Gen1 Service Issues
    I had to replace the linkage assembly in a 2012 Cruze LS today. The one I purchased said it fit my car, it looked the same, and all the bolts lined up to the correct locations. Now, I've noticed that the wipers, while functional, don't seem to cover as much of an arc as before when reattaching...
  8. Gen1 Service Issues
    Hello all, I need to refill my windshield fluid because this old one that the guy was using who I purchased from seems to leave irritatingly white marks on the spots where my wipers do not reach (top right corner and left hand side of the windshield looking out). Because the wiper fluid is low...
  9. Gen1 Appearance, Body, Detailing, & Interior
    1. Is 11570729 or 11611451 the correct number for the driverside? 2. How do you install it? 3. How do you remove the old one? 4. My old one is still intact on the pillar as I pulled my garnish off very slowly and it ended up just bending and deforming off the tether. Is there a way to reuse...
  10. Gen1 Service Issues
    After some cold days, I imagine this plastic gear didn't enjoy the weather, and decided to break off. It was laying on my driver side floor board. My heater vents only blow out from the front and I think the feet. When putting it onto front windshield defrost, it only blows from the front vents...
  11. Gen1 Appearance, Body, Detailing, & Interior
    I own a 2012 Cruze Eco purchased new in October 2011. About one year later, I had to replace the windshield wiper blades, as I live in the Pacific Northwest. However, I could not just buy the blades, I had to purchase new wipers. I have tried different makes of new wipers over the years, but...
  12. General Discussion
    does anyone know how to easily remove windshield washer water tank? mine leaking... which parts needs to remove for that?
  13. Gen1 Service Issues
    Hello All, Looks like something ate a piece of my Windshield Wiper fluid line and I am going to need to replace it. Unfortunately, the cut is deep in the engine bay and I have no idea how to reach it. Here is a picture of the washer fluid tank, and about as clear as I could get it and here is...
  14. Gen1 Audio & Electronics
    I had the windshield replaced in my 2013 Cruze. Now my tire pressure sensor doesn't work nor do my key fobs. It's my understanding there is a transmitter in the black box behind the rear view mirror. Any help would be most appreciated.
  15. Gen1 Appearance, Body, Detailing, & Interior
    For anyone suffering from the broken lever that controls the windshield defrost I have good news... You can remove the cluster and unclip the body harness behind it to gain access to the broken gear! Once the main gear is uncliped you have enough room to slide it out and remove the broken...
  16. Gen1 1.4L Turbo
    My plastic ice scraper scratched up my windshield. I have never had this happen before. I scraped my fingernail over the scratches and it catches. Can it be repaired cheaply? Are there any DIY kits for this? Now I am a bit weary scraping ice...
  17. Gen2 Appearance, Body, Detailing, & Interior
    Hi all, This is my first post on here. I picked up a 2016 Cruze LS Manual on Saturday and I'm loving it. I was wondering if anyone has a recommendation for a good sun shade that fits our cars. I found this one from WeatherTech, but I'm assuming it's for a pre-2016.5 Cruze and I'm not sure how...
  18. Gen1 1.4L Turbo
    I just had a quick question that I cannot seem to find the answer for, there are 2 sensors stuck to my windshield I don't know what they are for or if they are safe to remove one on the driver side bottom left is square and will blink what seems like at random blinking yellow red or green and on...
  19. General Discussion
    This morning my windshield was covered with heavy snow. So I get in my car, start it up, go outside and start removing the snow. What I didn't know was that my dad had left the wipers on at the intermittent position lowest setting. The wipers didn't move expect when I started removing some of...
1-19 of 101 Results
Top